DLP- no video, still audio, but lamp works?!?!? - Blu-ray Forum

Skulll0 · 05-02-2009, 04:45 AM

HELP!

I thought my DVR called so I yelled at the cable company. I told 'em I got an audio signal but no video! I switched it from HDMI1 to the side input (input 3 RCA) and I stilled said "Lady, audio, no video! Fix my dvr!"

I was convinced my lamp was and is fine because:
- It lights up the wall behind it as usual
- The TV's interface lights up fine, you know.. to select inputs visually.

Went to play xbox tonight, and I got audio and no video. Ahhhhh!

I've had it almost 2 years so I'm pretty sure all warranties would be up??? Bought it from Circuit City (omg dont even get me started) but the price was still great. Sigh. Ever seen this problem? Ideas?

Thanks!

Skulll0 · 05-03-2009, 04:27 AM

Sigh, I'm boned, aren't I?

quest88 · 05-03-2009, 05:06 AM

Call the manufacture you never know there may be a known issue that is still covered. Either way you might as well start looking at new TV's just to be safe.

Good luck !

TVguy86 · 05-03-2009, 05:48 AM

So what your saying is that you can see the menu or On Screen Display??

If you can see that then it sounds like your bulb is working and its something else.

Did you try changing inputs to non-High def inputs. Ie the yellow, white, red?

This may sound crazy but try un-plugging the tv from the wall. Let it sit for a min then plug it back in. I have seen this fix some problems before.

What kind of DLP is it?

Skulll0 · 05-03-2009, 05:00 PM

Its a 65" Toshiba. Sorry, I dont have the model # handy in front of me.

Yeah, to the post above, I do get the on-screen menu, brightly, and the bulb is clearly shinning bright.

I've tried EVERY input, low and high def.

I will try un plugging the TV and letting it sit for a bit. Maybe it will reset a chip's brain or something.

TVguy86 · 05-04-2009, 01:51 AM

Yea i wouldnt know were to go after that.

Could be your input board, the board all the video sources plug into. However if your getting sound it sounds like its working.

Yea id call toshiba and see what they have to offer.

Skulll0 · 05-04-2009, 05:38 AM

Rofl, lucky me, I let it sit unplugged and went to the gym for an hour. It worked when I came back!

TVguy86 · 05-04-2009, 07:14 PM

Cool
Easy fix.
Hopefully thats all it was. Just needed a reboot.

scorpionkingct · 05-21-2009, 12:35 PM

I have prolly the same model as you 65 inch 1080P DLP never heard of what you had happen,

05-02-2009, 04:45 AM	#1
Skulll0 New Member Member since:May 2009	DLP- no video, still audio, but lamp works?!?!? HELP! I thought my DVR called so I yelled at the cable company. I told 'em I got an audio signal but no video! I switched it from HDMI1 to the side input (input 3 RCA) and I stilled said "Lady, audio, no video! Fix my dvr!" I was convinced my lamp was and is fine because: - It lights up the wall behind it as usual - The TV's interface lights up fine, you know.. to select inputs visually. Went to play xbox tonight, and I got audio and no video. Ahhhhh! I've had it almost 2 years so I'm pretty sure all warranties would be up??? Bought it from Circuit City (omg dont even get me started) but the price was still great. Sigh. Ever seen this problem? Ideas? Thanks!

05-03-2009, 05:06 AM	#3
quest88 Expert Member Member since:Jan 2007 Location:San Diego CA Home Theater Gallery:19 Blu-ray collection:462	Call the manufacture you never know there may be a known issue that is still covered. Either way you might as well start looking at new TV's just to be safe. Good luck ! TVS - 54" PANNY PLASMA S1 1080P, 50" PANNY PLASMA S1 1080P , 42" PHILIPS LCD 1080P BLU RAY PLAYERS - PS3 60 GIG, PS3 80 GIG, PS3 80 GIG NON BC, 2 HP DV7 1020US Receiver Pioneer Elite VSX-21TXH Fronts : Polk Tsi 200 Center : Polk C20 Rears : 4 Polk Monitor 30 Sub : PA-120 320+ BLU RAYS http://www.sdett.org

05-21-2009, 12:35 PM	#9
scorpionkingct Active Member Member since:Nov 2007 Location:Connecticut, USA Home Theater Gallery:32 Blu-ray reviews:6	I have prolly the same model as you 65 inch 1080P DLP never heard of what you had happen, TV: 65" Toshiba DLP 1080P & 40 Sony LCD 1080P 120Hz Blu-Ray- Sony BDP-S300 (Down) & Samsung BD-P1500 (UP) Receiver- Pioneer VSX-32 Elite A/V & Backup Sony STR-DG820 7.1 Receiver Speakers-FloorStanding POLK AUDIO MONITOR 60 SERIES II, Rear- Sony SS-B3000 Bookshelf Speakers, Polk CS20 Center Speaker\| Sub- Monster Cable- 200 THX Cherry SD DVD's- 250+\| Blu-Rays- 35+ Living Room TV- 32" Sony XBR-6 Bravia

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Samsung 67" DLP Video Settings HELP?!	Rear Projection TVs	skhardy400	4	11-12-2009 04:26 AM
No HDMI audio PC to DLP	Blu-ray PCs, Laptops, Drives, Media and Software	goracer	0	05-21-2009 06:58 AM
Lamp Exploded in my Samsung DLP-HLP5085!!	Rear Projection TVs	jag2007	28	03-28-2009 10:40 PM
Audio no video	Blu-ray PCs, Laptops, Drives, Media and Software	bmoag	0	10-19-2008 03:20 AM
replacing dlp lamp with led	Home Theater General Discussion	buckshot	6	02-09-2008 01:19 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-03-2009, 04:27 AM	#2
Skulll0 New Member Member since:May 2009	Sigh, I'm boned, aren't I?

05-03-2009, 05:48 AM	#4
TVguy86 Active Member Member since:Jul 2008 Location:GO HUSKERS.	So what your saying is that you can see the menu or On Screen Display?? If you can see that then it sounds like your bulb is working and its something else. Did you try changing inputs to non-High def inputs. Ie the yellow, white, red? This may sound crazy but try un-plugging the tv from the wall. Let it sit for a min then plug it back in. I have seen this fix some problems before. What kind of DLP is it?

05-03-2009, 05:00 PM	#5
Skulll0 New Member Member since:May 2009	Its a 65" Toshiba. Sorry, I dont have the model # handy in front of me. Yeah, to the post above, I do get the on-screen menu, brightly, and the bulb is clearly shinning bright. I've tried EVERY input, low and high def. I will try un plugging the TV and letting it sit for a bit. Maybe it will reset a chip's brain or something.

05-04-2009, 01:51 AM	#6
TVguy86 Active Member Member since:Jul 2008 Location:GO HUSKERS.	Yea i wouldnt know were to go after that. Could be your input board, the board all the video sources plug into. However if your getting sound it sounds like its working. Yea id call toshiba and see what they have to offer.

05-04-2009, 05:38 AM	#7
Skulll0 New Member Member since:May 2009	Rofl, lucky me, I let it sit unplugged and went to the gym for an hour. It worked when I came back!

05-04-2009, 07:14 PM	#8
TVguy86 Active Member Member since:Jul 2008 Location:GO HUSKERS.	Cool Easy fix. Hopefully thats all it was. Just needed a reboot.