SAMSUNG: Share Your Custom Display Settings

[Lush23]

Anybody have settings for the Samsung UN55D6900?

[jake1675]

does any one have settings for UN60ES8000 Samsung LED

[Grim Reaper]

here is what i use for my 32" led-lcd 1080p hdtv.

samsung un32d5500

picture mode: dynamic
backlight: 15
contrast: 50
brightness: 40
sharpness: 50
color: 55
tint (g/r): g50/r50

picture options
color tone: cool
digital noise filter: auto
mpeg noise filter: auto
hdmi black level: low
film mode: greyed out

screen adjustment
picture size: screen fit

[Caesu]

Any Calibrations listed for the Samsung UN50EH5000 series, or at least any screen size in the UNxxEH5000 series?

Im trying to help set one up and man, I dont even know where to start. The TV is not listed on tweakmytv.com which I usually use.

thanks!

[Loiselle]

Brand: Samsung
Model: PN51E550
Calibration: ISF on 7/28/2012

Here are ALL MY SETTINGS that were adjusted by the technician.

Picture Mode: Movie
Cell Light: 20
Contrast: 80
Brightness: 45
Sharpness: 20
Color: 46
Tint (G/R): G50/R50
---Advanced Settings---
Dynamic Contrast: Off
Black Tone: Off
Flesh Tone: 0
RGB Only Mode: Off
Color Space: Auto
---White Balance---
R-Offset: 26
G- Offset: 23
B-Offset: 29
R-Gain: 26
G-Gain: 23
B-Gain: 26
--------------------
Gamma: 0
Motion Lighting: Off (greyed out)
--------------------
---Picture Options---
Color Tone: Warm2
Digital Noise Filter: Off
MPEG Noise Filter: Off
HDMI Black Level: Off (greyed out)
Film Mode: Off (greyed out)


After having the calibration done, the technician did say that the settings my TV shipped with were very close to centered as he put it. He showed me the color graphs and everything, and he was right. But, even after the calibration, I did notice much richer colors, and much better color separation. Everything looks a lot more vivid and clean without being too over saturated.

All in all, I am happy I got the service done. Free, at that. Being a BestBuy Rewards Zone Silver member has its benefits!

[Wormow]

Anyone have good settings for Samsung Smart 3DTV PS51E550D1M?

[MPX309]

LE40C530 - Night Viewing . . . If I'm watching during day everything's the same except Mode is Standard and backlight is 7

Picture:
Mode: Movie
Backlight: 4
Contrast: 93
Brightness: 44
Sharpness: BluRay - 0 / Upscaled DVD - 10
Colour: 47
Tint G/R: G53/R47

Advanced Settings
Blacktone: Off
Dynamic Contrast: Off
Shadow Detail: 0
Gamma: 0
RGB Only: Off
Colour Space: Auto

White Balance.
R-Offset: 26
G- Offset: 24
B-Offset: 25
R-Gain: 15
G-Gain: 26
B-Gain: 17

Flesh Tone: 0
Edge Enhancement: On

Picture Options
Colour Tone: Warm 1
Size: Screen Fit
DNR: Off
MPEG Noise: Off


I must also add I've made some changes to my Blu Ray's display settings but nothing drastic, but the above settings are what works best for me combined with the blu ray's settings.

[retrogamer1981]

Samsung 55" LED/LCD 1080P HD Display
Model No: UN55D6400
High Speed HDMI Cable
Low Light

Calibrated to ISF Specifications


Picture menu
Mode: Movie
Backlight: 12
Contrast: 92
Brightness: 45
Sharpness: 20
Color: 48
Tint: G52/R48

Screen adjustment submenu:
Picture Size: Screen Fit
Position: [no change]

Eco Solution submenu:
Energy Saving: Off
Eco Sensor: Off
No Signal Power Off: Off

Auto Adjustment and Screen submenus: [Grayed out]

Advanced settings submenu
Black tone: Off
Dynamic contrast: Off
Shadow Detail: +2
Gamma: +1
Expert Pattern: Off
RGB Only Mode: Off
Color space: Custom
White Balance: [see below]
10p White Balance: On
Flesh tone: 0
Edge enhancement: Off
Motion Lighting: Off
xvYCC: Off
LED Motion Plus: On

Color Space submenu:
Red: Red 59, Green 5, Blue 0
Green: Red 20, Green 55, Blue 3
Blue: Red 0, Green 5, Blue 100
Yellow: Red 57, Green 50, Blue 0
Cyan: Red 14, Green 51, Blue 55
Magenta: Red 50, Green 5, Blue 59

White balance submenu:
R-Offset: 24
G-Offset: 25
B-Offset: 26
R-Gain: 31
G-Gain: 25
B-Gain: 25

10p White Balance submenu:
Interval 1: Red 5, Green 4, Blue 4
Interval 2: Red 0, Green 0, Blue 0
Interval 3: Red 1, Green 1, Blue 2
Interval 4: Red 0, Green 0, Blue 0
Interval 5: Red 2, Green 2, Blue 1
Interval 6: Red 0, Green 1, Blue 0
Interval 7: Red 1, Green 1, Blue 1
Interval 8: Red 2, Green 2, Blue 3
Interval 9: Red 0, Green 0, Blue 1
Interval 10: Red 0, Green 0, Blue 3

Picture options submenu
Color tone: Warm2
Digital Noise Filter: Off
MPEG Noise Filter: Off
HDMI black level: Normal [grayed out]
Film mode: Off [grayed out]
Auto motion plus: Custom
-- Custom settings:
Blur reduction: 10
Judder reduction: 0

[luciano24]

looking for settings for a samsung 55 LED UN55EH6000FXZA.

Thanks alot

[XeoNoX]

Calibration settings Used on my Samsung PN51E535 / PN51E535A3F ( Originally Calibrated for PN51E530 , thanks CMonMan )
Mode: Movie
Cell light: 18
Contrast 95
Brightness 42 (Night time) 52 (During the day)
Sharpness 30
Color 53
Tint G49/R51
Advanced Settings
-Color space Auto
-white balance
--R Offset 21
--G offset 24
--B Offset 27
--R Gain 11
--G gain 23
--B gain 25
-Dynamic contrast OFF
-Black Tone OFF
-Flesh Tone 0
Picture Options
-Color tone WARM2
-Size 16:9
Digital noise filter OFF
Film mode OFF

[dsman71]

I have mine set on Dynamic with
contrast 100
color 45
backlight 20
sharpness 55
backlight 20
AMP - Smooth although it was *off* when I just checked it this morning

But now I was told Dynamic isnt good for the set or yourself so I changed it to movie mode, which changed my settings again
Contrast 95, Brightness 45, Sharpness 20 & Color 50...and Backlight 20.

[Hatter]

Anyone have settings for a Samsung PN51E530A3F?

No rush, the tv only comes on wednesday

All this display theory cramming over the past few days is going to make my head explode.

edit: I can't believe I missed it a few posts up.

edit 2: Applied the settings XeoNox posted (thanks to you and CMonMan at AVS). PQ looks great.

[KennethNL]

Hi all, first post on this very informative forum!

My Samsung UE55ES7000 just arrived yesterday and I can't seem to find the most optimal display settings for watching blu-rays.

Any help would be much appreciated!

[Villiam Hayes]

Samsung PS(PN)64E8000.
I have run the Spear's and Munsil disc through this and here's my settings:
Picture Mode:Movie
Cell Light:19
Contrast:100
Brightness:48
Sharpness:0
Colour:51
Tint (G/R) G51 R49
Picture Size: Screen Fit

Advanced Settings:
Dynamic Contrast Off
Black Tone Off
Flesh Tone 0
RGB Only Off
Colour Space Auto

White Balance:
R-Offset 27
G-Offset 25
B-Offset 26
R-Gain 25
G-Gain 27
B-Gain 24
10 Point White Balance:On
(1)Red -3,Green-1,Blue-2
(2)Red-4,Green-2,Blue-3
(3)Red-3,Green-2,Blue-4
(4)Red-4,Green-2,Blue-3
(5)Red-4,Green-2,Blue-3
(6)Red-5,Green-2,Blue 0
(7)Red-7,Green+1,Blue+3
(8)Red-2,Green+1,Blue +2
(9) Red-5,Green 0, Blue +7
(10) Red-3,Green 0, Blue +3

Gamma-1
Expert Pattern Off
xvYCC Off
Motion Lighting Off
Colour Tone:Warm2
Digital Noise Filter:Off
MPEG Noise Filter:Off
HDMI Black Level:Normal
Film Mode:Cinema Smooth

[CanadianEH]

Samsung 50" Plasma PN50C540G3FXZC

Mode: Movie
Cell Light: 12
Contrast: 90
Brightness: 46
Sharpness: 40
Color: 61
Tint:G51/R49

Advanced Settings
Black Tone: Off
Dynamic Contrast: Off
Gamma: +1
RGB Only Mode: Off
Color Space: Auto

White Balance:
R-Offset 22
G-Offset 24
B-Offset 27
R-Gain 26
G-Gain 24
B-Gain 25

Flesh Tone: 0
Edge Enhancement: Off

Picture Options:
Color Tone: Warm1
Size: 16:9
DNF: Auto
MPEG Noise Filter: Auto

Screen Burn Protection:
Pixel Shift: On
Auto Protection Time: 10 min.
Side Grey: Light

[BLU_Until_The_End]

I sincerely apologize if this has been asked in this thread already, but I went back several pages and I couldn't find anything. I am about to purchase the UN55ES7500 this upcoming week and any custom dislay settings would be helpful.

Also, Geek Squad offers a calibration service for about $250 and they make it sound like the best thing since sliced bread. Does anyone know if it's worth it?

Thanks!

[Villiam Hayes]

Originally Posted by BLU_Until_The_End

I sincerely apologize if this has been asked in this thread already, but I went back several pages and I couldn't find anything. I am about to purchase the UN55ES7500 this upcoming week and any custom dislay settings would be helpful.

Google it,here is one set of settings I found:

ES7500 Calibration Notes: Calibration Notes: The ES7500 calibrated pretty close to D6500K from the Movie setting. There was just a blue push on the top end and red push on the low end. Once you have followed the following settings all you need to adjust is the backlight up or down depending upon room light and how much screen uniformity is affecting the picture. Lower backlight will eliminate screen uniformity issues. We recommend a backlight of 12 for most rooms.

Post Calibration Settings

Picture Mode Movie
Backlight 12
Contrast 92
Brightness 47
Sharpness 0
Color 50
Tint G50/R50
ADVANCE SETTINGS
Dynamic Contrast Off
Black Tone Off
Flesh Tone 0
RGB Only Mode Off
Color Space Custom
10pt White Balance On
Gamma 0
Expert Pattern Off
Motion Lighting Off
LED Motion Plus Off
PICTURE OPTIONS
Color Tone Warm2
Digital Noise Filter Off
MPEG Noise Filter Off
HDMI Black Level Low
Film Mode Off
Auto Motion Plus Off
Smart LED Standard
Cinema Black Off
10PT WHITE BALANCE
ON
Interval Red Green Blue
1 -1 1 0
2 -7 -4 -4
3 -8 -6 -7
4 -6 -5 -7
5 -3 -2 -5
6 -2 -1 -3
7 -1 -1 -4
8 0 -2 -3
9 0 -2 +7
10 +6 0 -5
COLOR SPACE
Color Space Red Green Blue
Red 48 0 0
Green 0 52 0
Blue 0 0 55
Yellow 50 50 0
Cyan 0 50 50
Magenta 50 0 50
AUTO MOTION PLUS - CUSTOM
Blur Reduction 5
Judder Reduction 2

[BLU_Until_The_End]

Originally Posted by Villiam Hayes

Google it,here is one set of settings I found:

ES7500 Calibration Notes: Calibration Notes: The ES7500 calibrated pretty close to D6500K from the Movie setting. There was just a blue push on the top end and red push on the low end. Once you have followed the following settings all you need to adjust is the backlight up or down depending upon room light and how much screen uniformity is affecting the picture. Lower backlight will eliminate screen uniformity issues. We recommend a backlight of 12 for most rooms.

Post Calibration Settings

Picture Mode Movie
Backlight 12
Contrast 92
Brightness 47
Sharpness 0
Color 50
Tint G50/R50
ADVANCE SETTINGS
Dynamic Contrast Off
Black Tone Off
Flesh Tone 0
RGB Only Mode Off
Color Space Custom
10pt White Balance On
Gamma 0
Expert Pattern Off
Motion Lighting Off
LED Motion Plus Off
PICTURE OPTIONS
Color Tone Warm2
Digital Noise Filter Off
MPEG Noise Filter Off
HDMI Black Level Low
Film Mode Off
Auto Motion Plus Off
Smart LED Standard
Cinema Black Off
10PT WHITE BALANCE
ON
Interval Red Green Blue
1 -1 1 0
2 -7 -4 -4
3 -8 -6 -7
4 -6 -5 -7
5 -3 -2 -5
6 -2 -1 -3
7 -1 -1 -4
8 0 -2 -3
9 0 -2 +7
10 +6 0 -5
COLOR SPACE
Color Space Red Green Blue
Red 48 0 0
Green 0 52 0
Blue 0 0 55
Yellow 50 50 0
Cyan 0 50 50
Magenta 50 0 50
AUTO MOTION PLUS - CUSTOM
Blur Reduction 5
Judder Reduction 2

Thanks!

Anyone have any eperience with Geek Squad TV calibration? It it worth the $$$ or is it something I can/should do on my own?

[bhampton]

I calibrated my Samsung 720p 3D plasma the other day.

I've had it for nearly 2 years but the defaults looked fine, the posted values at tweakmytv looked fine,..... I just didn't bother.

I love calibrating my projector and I figured maybe calibrating a different type of display would be fun.

It was so easy and the results we so good. Gave me a much higher respect for the inexpensive set I picked up as part of a Black Friday sale.

[BLU_Until_The_End]

Originally Posted by bhampton

I calibrated my Samsung 720p 3D plasma the other day.

I've had it for nearly 2 years but the defaults looked fine, the posted values at tweakmytv looked fine,..... I just didn't bother.

I love calibrating my projector and I figured maybe calibrating a different type of display would be fun.

It was so easy and the results we so good. Gave me a much higher respect for the inexpensive set I picked up as part of a Black Friday sale.

Thanks for the feedback! I am seriously considering calibrating my own TV, but then I will always wonder if Geek Squad could've gotten me better picture quality...I still don't know what I want to do