| Site locale: United States |
|
||||
|
||||||
|
Best Blu-ray Deals |
Best Blu-ray Deals, See All the Deals » |
Top deals |
Price drops
|
![]() $4.99 | ![]() $4.99 | ![]() $4.99 | ![]() $4.99 | ![]() $9.99 | ![]() $14.26 | ![]() $24.99 | ![]() $4.99 | ![]() $9.99 | ![]() $14.99 | ![]() $7.96 | ![]() $5.00 | ![]() $14.99 | ![]() $4.99 | ![]() $24.96 | ![]() $34.99 | ![]() $19.96 | ![]() $13.99 | ![]() $4.99 |
|
|
#1 |
|
Member
Jan 2012
|
Hii, I bought a Pioneer VSX-1021-K receiver and i found the speakers i wanted and was wondering if my receiver can handle them. If you guys can give me a yes or no that be the best!! thanks.
7.1 System Pioneer VSX-1021-K Amplifier Output Details 120 Watt, 8 Ohm - 7 channel(s) ( Surround ), 6 Ohm - 7 channel(s) ( Surround ), 8 Ohm - 20 - 20000 Hz - THD 0.08 % - 7 channel(s) ( Surround ) Sound Output Mode Surround Sound Audio D/A Converter 24bit / 192kHz Front Speakers-Polk Audio New Monitor 65T Three-Way Ported Floorstanding Loudspeaker Total Frequency Response: 38Hz-25kHz Upper -3dB Limit: 24 kHz Lower -3dB Limit: 48 Hz 8 Ohms 20-200 watts per channel 90 dB Center Speaker-Polk Audio New Monitor 25C Two-Way Center Channel Loudspeaker Total Frequency Response: 50Hz-25kHz Upper -3dB Limit: 24 kHz Lower -3dB Limit: 60 Hz 8 Ohms 20-175 watts per channel 90 dB 2 Surround Speakers Polk Audio TSi 200 Crossover frequency 2500Hz Response bandwidth 43 - 25000 Hz -3dB frequency response 50 - 24000 Hz Input impedance 8 Ohm Recommended amplifier power 20 - 150 Watt Sensitivity 89 dB Thanks guys |
|
|
|
#5 |
|
Moderator
|
Yes, no probs
Klipsch Cornwall L/R, Klipsch Heresy center, Definitive Technology BP2's (x4) rear, Wharfedale sw380 Subs (x2),Atlantic Technologh PBM 352 THX subs (x2), 2-8 inch transmission line Subs (rear), Yamaha power Amps mx830 (x2), Adcom 5503 3 channel power amp, Behringer EP4000 Power amp, BD HTPC with Asus Essence ST + H6, Da-lite 16:9 106" Screen, BenQ 3D Projector, Phillips 42 inch HDTV.
|
|
|
|
#6 |
|
Member
Jan 2012
|
Thanks guys!!! also i was wondering do you think the Polk Audio TSi 200's would be a good rear Surround sound speaker?
|
|
|
|
#7 |
|
Active Member
|
The TSi 200's look like they are basically Monitor 40's with a different cabinet, and if they perform anything like the Monitor series (or better) then I'd say yes since I have the Monitor 30's as surrounds and have never felt like they were lacking.
My Current Setup:
Receiver: Onkyo TX-NR818 Amps: Crown XLS 1500 (Mains), Dayton Audio APA150 (Bridged Mono for Center), Dayton Audio SA230 (Sub) TV: Samsung UN46F6400 Front L/R Speakers: Polk Audio Monitor 70's Center Speaker: Polk Audio CS2 Rear L/R Speakers: Polk Audio Monitor 30's Sub: 1 DIY 12 Inch Sealed sub Blu-Ray/Gaming: PS3 Slim 120GB Other Movies/music: Custom built desktop computer |
|
|
|
#8 | |
|
Blu-ray Champion
|
Quote:
Main Theater Setup:
(Panasonic 65" HDTV) (Onkyo 5008) (Onkyo M-282) (PS3 Slim 250gb)(XBOX360 4GB) (Monitor Audio - RX2's - (4)RXFX - RX CENTER) (SVS - (2)PB12 Plus) (Harmony 1100) (Monster HDP-2400) Bedroom Setup: (Samsung LN40B610) (Onkyo 805) (Sony BDP-S570)(Monster HDP-1800) (Klipsch - F2's - C2 - Quintet III's) (Personal built 10" Sub) (Harmony 880) |
|
|
|
|
#9 |
|
Member
Jan 2012
|
I havent decided yet but one of the speakers are having a deal when you buy them you get Polk Audio PSW Series PSW505 12" Powered Subwoofer for free, does anybody know if this a good or reliable sub? or has purchase this sub before? and how well its performance is.
|
|
|
|
#10 |
|
Member
Jan 2012
|
I also was looking into Pioneer elite Vsx 42 and what do you think would be a better receiver for sound quality the vsx 42 or the pioneer vsx 1021?
|
|
|
|
#11 |
|
Blu-ray Ninja
|
The VSX 1021 look much better build in quality unfortunately some Elite models came down way too much in quality specially with those clip speakers terminal .
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|