crazyBLUE's HT !!!!

[crazyBLUE]

Originally Posted by erict

Just a little Spring Cleaning Eric

[aces high]

Originally Posted by crazyBLUE

Thanks aces. Here is the Dayton 12" Driver ~ http://www.parts-express.com/pe/show...number=295-464

as for the panel when I first started researching it was a large area about 2 feet off the front of the screen . When I made these panels I decided to separate them a foot because they hang down about 4 inches.

Here is a good place to get some ideas ~http://forum.blu-ray.com/home-theate...-material.html

I take it that your happy with the performance of the Dayton drivers? After looking at the specs of the 12 I think I may go with the 15. Is that the 15 that you have? Now you just need one more 15 inch sub so you could have them in all four corners, two 15's up front and two 12's in the back would be sweet!

[erict]

Originally Posted by crazyBLUE

Just a little Spring Cleaning Eric

Spring??...... Your just making room for the x-mas tree

[crazyBLUE]

Originally Posted by aces high

I take it that your happy with the performance of the Dayton drivers? After looking at the specs of the 12 I think I may go with the 15. Is that the 15 that you have? Now you just need one more 15 inch sub so you could have them in all four corners, two 15's up front and two 12's in the back would be sweet!

My 10" ~ 12" & 15" are now all the same Dayton Drivers & an aluminum driver sounds so much better then my old carbon fiber drivers IMO. Someday I will get #4 & it will be the same.

[crazyBLUE]

Originally Posted by erict

Spring??...... Your just making room for the x-mas tree

Winter Cleaning just didn't sound right I wanted to move the XPA over & bring the UPA up anyways

[aces high]

Originally Posted by crazyBLUE

My 10" ~ 12" & 15" are now all the same Dayton Drivers & an aluminum driver sounds so much better then my old carbon fiber drivers IMO. Someday I will get #4 & it will be the same.

I didn't realize that you had a 10", maybe you should get an 18" next so then you'll have most of the size's covered.

[TheFactor]

Originally Posted by erict

X 100

[erict]

Originally Posted by crazyBLUE

Winter Cleaning just didn't sound right I wanted to move the XPA over & bring the UPA up anyways

Did you end up spraying the stand?

[TheFactor]

Glad you got your new toy today

[crazyBLUE]

Originally Posted by aces high

I didn't realize that you had a 10", maybe you should get an 18" next so then you'll have most of the size's covered.

An 18" is to big for the room aces. #4 will be a 10 or 12 inch sub.

[crazyBLUE]

Originally Posted by erict

Did you end up spraying the stand?

No Eric ~ I went & bought some High Gloss acrylic paint today. Took 2 coats but looks good. That is why I am not putting it back together until tomorrow.

[crazyBLUE]

Originally Posted by TheFactor

Glad you got your new toy today

Thanks Ed ~ Will get it all together in the morning for a test drive in the afternoon

[erict]

Originally Posted by crazyBLUE

Thanks Ed ~ Will get it all together in the morning for a test drive in the afternoon

After a pot of coffee you will be ready go.

[crazyBLUE]

Originally Posted by erict

After a pot of coffee you will be ready go.

about 4 a.m.

[progers13]

Good evening Brent Glad to see your driver showed up after all

[crazyBLUE]

Originally Posted by progers13

Good evening Brent Glad to see your driver showed up after all

Good Evening Paul.

It did & tomorrow I will TEST it out, Any suggestions on what to play

[progers13]

Originally Posted by crazyBLUE

Good Evening Paul.

It did & tomorrow I will TEST it out, Any suggestions on what to play

I just watched Dark Knight yesterday. I didn't realize how much LFE was in that one.

Of course there's also the ever-reliable Rambo. The .50 cal sequences were devastating on my room

[crazyBLUE]

Originally Posted by progers13

I just watched Dark Knight yesterday. I didn't realize how much LFE was in that one.

Of course there's also the ever-reliable Rambo. The .50 cal sequences were devastating on my room

I have not seen TDK in some time so that will probably be it

[Aerodude73]

Originally Posted by progers13

Good evening Brent Glad to see your driver showed up after all

+1 - Great news Brent, that thing is freakin' Gorgeous!!!!!!!!!

[Show spoiler](& frightening, in a good way)

Originally Posted by crazyBLUE

Good Evening Paul. It did & tomorrow I will TEST it out, Any suggestions on what to play

TDK, Hellboy II, U-571 (<---- Two Words: Depth Charges)

Originally Posted by progers13

I just watched Dark Knight yesterday. I didn't realize how much LFE was in that one.

Of course there's also the ever-reliable Rambo. The .50 cal sequences were devastating on my room

For me, TDK scene where the Joker opens up the door on that truck & fires an RPG at Batman, is like a Solid Sledgehammer HIT TO THE GUT when it fires. Holy OOOOMMMMPPPPPHHHH for your Sub(s) to show their stuff!!

Btw Brent - That room (spring cleaning, lol) is something I'd never have the patience to put back together (hooking up, re-calibrating, redoing all that great wire management)

[crazyBLUE]

Originally Posted by Aerodude73

+1 - Great news Brent, that thing is freakin' Gorgeous!!!!!!!!!

[Show spoiler](& frightening, in a good way)

TDK, Hellboy II, U-571 (<---- Two Words: Depth Charges)

For me, TDK scene where the Joker opens up the door on that truck & fires an RPG at Batman, is like a Solid Sledgehammer HIT TO THE GUT when it fires. Holy OOOOMMMMPPPPPHHHH for your Sub(s) to show their stuff!!

Btw Brent - That room (spring cleaning, lol) is something I'd never have the patience to put back together (hooking up, re-calibrating, redoing all that great wire management)

Evening Steve

It will be TDK or U571 now, The depth charges are great going off especailly turned up Lets hop Jen takes off or I will have to run her off