Quote:
Originally Posted by blitz6speed
I used 800 degrees to get the YLOD fixed. 200 on both sides of the board at first, 500 across the top, then 800 on cpu/gpu 30 seconda a piece in a swirl motion, 2 times per chip, then 15 seconds per chip once, then cooled it down to 500 on both chips for 10 seconds, then 200 on the chips and then the rest of the board. Let sit for 25-30 min. Then apply nice thin coat of arctic silver 5 all over the gpu/cpu and put it back together.
Worked awesomely.
|
One of the videos I saw doesn't heat the entire board, only 800 degrees to the chips.