Quote:
Originally Posted by RickX
Thanks for the reply.
Just so I'm clear, what you're saying that the 3300 allows you to manually set the crossover frequency individually for each of the speakers (front, centre, surround & surround back), except for the sub woofer ? So if I set a universal 100Hz for all my speakers, anything under that frequency will be output to the sub ?
Looking through the manual under the "Adjusting the Speaker setting manually" section (Pg 68 - 73), I don't see any mention of setting the crossover frequency for each of the speakers; only "Level", "Size" and "Distance" are configurable.
Any thoughts ?
Thanks.
|
If you go to the menu on the 3300ES.. either GUI or on the display..
Go to speaker settings and it is right after Surround Position.. you will see the crossover setting for the fronts, then center and then surrond speakers.. The surround speaker crossover is for all the surrounds.. That is if you use the display on the receiver..
If you use the GUI interface go to "settings" the last choice.. Then "speaker" then "crossover freq"... there you can set the crossover for each set of speakers... Front, Center, Surrounds..