Audio not in sync with picture

[link_of_hyrule]

Can any body help me...
When playing a BluRay movie, the audio is slightly out of sync with the picture. This happens with any disc I put in. Not isolated to one time. (This is my second tv - I did not have the problem with the first one - and had set everything up the same way).
I have the BluRay connected to the TV via HDMI cable. The reciever is connected to the BluRay via 6 analogue cables (older reciever - no HDMI input).
My equipment is listed below if that will help.
Thanks

[LordoftheRings]

Try to disable the CEC Control from your Samsung TV display.

[link_of_hyrule]

Sorry, I'm not familiar with CEC. How do I do that?

[LordoftheRings]

Originally Posted by link_of_hyrule

Sorry, I'm not familiar with CEC. How do I do that?

In your Samsung TV menu setup, under HDMI, you should have a feature that deal with turning your TV automatically when you power your Blu-ray player, or your A/V Receiver. It stands for Compatible Enable Components through HDMI connectivity. It is a bad deed in most circumstances, better to Disable it, as it creates much more problems than it try to resolve them.

Check, you'll know when you'll find it.

Also, check in your Samsung TV manual about lip sync issues, and under the last section "Troubeshooting".

* If you didn't have that issue with your previous TV, then it is from this newer Samsung TV set for sure.

Good luck & let me know if you find the cure.

[link_of_hyrule]

Hey thanks for your advice, but it didn't work. I went into the menu and turned off the CEC, but still have the same problem.. It's strange because the problem seems to drift in and out of being in sync. Anyway, if you have any other ideas, please let me know

Cheers

[raygendreau]

Try setting the audio delay on your Denon. See page 16 of your manual or

http://a248.e.akamai.net/pix.crutchf...033AV4802R.PDF

if you dont have the manual. Also see page 67. You can vary the delay from 0 to 200 ms.

[LordoftheRings]

Originally Posted by link_of_hyrule

Hey thanks for your advice, but it didn't work. I went into the menu and turned off the CEC, but still have the same problem.. It's strange because the problem seems to drift in and out of being in sync. Anyway, if you have any other ideas, please let me know

Cheers

Yep, I got another suggestion for you, try another HDMI cable.

* Your Samsung TV set's feature for the Control that I mentioned before, I think it's called HDCP (HDMI Compatible Components); you've got to disable that feature.