How to send audio through to TV w/ Onkyo 805?

[I Bleed Blu]

Can someone tell me how to get the audio as to come from the TV speakers instead of my 5.1 setup.. Reason being, I've sold my speakers and haven't bought my new ones yet and I want to the volume to come out of the TV so I dont have to unhook everything from the receiver. I know there has to be something to allow me to do this I just cant figure it out..

[un4gvn94538]

Originally Posted by I Bleed Blu

Can someone tell me how to get the audio as to come from the TV speakers instead of my 5.1 setup.. Reason being, I've sold my speakers and haven't bought my new ones yet and I want to the volume to come out of the TV so I dont have to unhook everything from the receiver. I know there has to be something to allow me to do this I just cant figure it out..

hdmi?
i think its in the hdmi set up menu. a selection that prevents the audio from being sent via hdmi. it does tell you in the manual. if you dont have it, you can download it from the onk site.

http://filedepot.onkyousa.com/Files/...7f78634367a687

[un4gvn94538]

see:

Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI OUT, unless the HDMI Audio Out setting is set to On (see
page 99).

[ZIPPO]

Originally Posted by I Bleed Blu

Can someone tell me how to get the audio as to come from the TV speakers instead of my 5.1 setup.. Reason being, I've sold my speakers and haven't bought my new ones yet and I want to the volume to come out of the TV so I dont have to unhook everything from the receiver. I know there has to be something to allow me to do this I just cant figure it out..

If your receiver has a HDMI TV bypass try using that. If it doesn't, run HDMI from your Blu-ray player to the TV.

[ZIPPO]

Originally Posted by un4gvn94538

see:

Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI OUT, unless the HDMI Audio Out setting is set to On (see
page 99).

from page 99 of your manual
HDMI Audio
This setting determines whether audio received by an
HDMI input is output by the HDMI OUT. You may want
to change this setting to On if your TV is connected to
the HDMI OUT and you want to listen to audio from an
HDMI component through your TV’s speakers. Nor-
mally, it should be set to Off.
Off:
HDMI audio is not output (default).
On:
HDMI audio is output.
Notes:
• If On is selected and the signal can be output by the
TV, the AV receiver will output no sound through its
speakers.
• When TV Control is enabled, this setting is set to
Auto.
• With some TVs and input signals, no sound may be
output even if On is selected.
• When the HDMI Audio setting is set to On, or TV
Control is set to Enable and you’re listening through
your TV’s speakers (see page 37), if you turn up the
AV receiver’s volume control, the sound will be output
by the AV receiver’s speakers. To stop the AV
receiver’s speakers producing sound, change the set-
tings, change your TV’s settings, or turn down the AV
receiver’s volume.
Enable:
HDMI Control enabled.
Notes:
• Select Disable if a connected component is incompat-
ible or you’re not sure about its compatibility.
• If operation is unreliable when set to Enable, select
Disable instead.
• When the HDMI Audio setting is set to On, or TV
Control is set to Enable and you’re listening through
your TV’s speakers (see page 37), if you turn up the
AV receiver’s volume control, the sound will be output
by the AV receiver’s speakers. To stop the AV
receiver’s speakers producing sound, change the set-
tings, change your TV’s settings, or turn down the AV
receiver’s volume.

[I Bleed Blu]

Thanks guys, thats what I was looking for. I knew you guys would save me!