Help! Epson 8350 Bulb Replacement - Blu-ray Forum

CRMA · 05-12-2014, 01:06 AM

Hey Guys,
I recently had my lamp go out on my Epson 8350. It had 1333 hrs on it when it was rated up to 4000hrs. I keep it in Eco mode and have the High Altitude setting on since I am in Colorado.
I know there are quite a few knock offs on the replacements so I did my homework and found this:
https://purelandsupply.com/v13h010l4...ctor-lamp.html

It contains the same OEM bulb and the housing is the same, but it is 100.00 less than the Epson website.

After the new install and an air filter change everything is fine, except one faint line that runs across the center of the screen. It is barely visible but if you look closely it is there. Anyone experience this? Is it the bulb? Any ideas? It wasn't there before so I am not sure what happened.

The projector is 3.5 years old too. Thanks for the time and help in advance.
Scott

frogmort · 05-12-2014, 01:28 AM

Not really sure what the problem is, but you could try removing and then reseating the lamp housing in the projector. You could also try cleaning the lamp lens and the prism directly in front of the lamp lens while you're in there. Badas recommended that to me in this thread.

Sorry I couldn't be of more help. Hope you get it figured out soon.

punisher · 05-12-2014, 02:56 PM

I would call Epson and try to get some discount on a replacement bulb....

frogmort · 05-14-2014, 05:20 AM

Hope the fact that you haven't responded to your thread is because you've got it taken care of.

05-12-2014, 01:06 AM	#1
CRMA Expert Member Top contributor Member since:Jan 2008 Home Theater Gallery:22 Blu-ray collection:156 Blu-ray reviews: 46 Trading Score:1	Help! Epson 8350 Bulb Replacement Hey Guys, I recently had my lamp go out on my Epson 8350. It had 1333 hrs on it when it was rated up to 4000hrs. I keep it in Eco mode and have the High Altitude setting on since I am in Colorado. I know there are quite a few knock offs on the replacements so I did my homework and found this: https://purelandsupply.com/v13h010l4...ctor-lamp.html It contains the same OEM bulb and the housing is the same, but it is 100.00 less than the Epson website. After the new install and an air filter change everything is fine, except one faint line that runs across the center of the screen. It is barely visible but if you look closely it is there. Anyone experience this? Is it the bulb? Any ideas? It wasn't there before so I am not sure what happened. The projector is 3.5 years old too. Thanks for the time and help in advance. Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-12-2014, 01:28 AM	#2
frogmort Blu-ray Champion Top contributor Member since:Mar 2010 Location:Frogmorton Blu-ray collection:- Blu-ray reviews:27	Not really sure what the problem is, but you could try removing and then reseating the lamp housing in the projector. You could also try cleaning the lamp lens and the prism directly in front of the lamp lens while you're in there. Badas recommended that to me in this thread. Sorry I couldn't be of more help. Hope you get it figured out soon.

05-12-2014, 02:56 PM	#3
punisher Blu-ray Knight Member since:May 2010 Location:MSG CHASE BRIDGE Blu-ray reviews:2 Trading Score:223	I would call Epson and try to get some discount on a replacement bulb....

05-14-2014, 05:20 AM	#4
frogmort Blu-ray Champion Top contributor Member since:Mar 2010 Location:Frogmorton Blu-ray collection:- Blu-ray reviews:27	Hope the fact that you haven't responded to your thread is because you've got it taken care of.

Best Blu-ray Movie Deals