No Sound on The Omen? - Blu-ray Forum

GMAN · 12-18-2006, 01:23 AM

I just bought Omen on Blu-Ray. When I start the movie, there is no sound. There is sound on the DVD table of contents page and all of the features. Not when I start the movie. Is this a bad disc?

Deciazulado · 12-18-2006, 02:07 AM

The 2006 Omen has the following sound options:

English: DTS HD 5.1 Master Lossless Audio
Español: 5.1 Dolby Digital
Français: 5.1 Dolby Digital

Seems that you're not getting the DTS HD MA soundtrack

Try selecting the French or Spanish track as an experiment, you'll probably get sound from those with no problem (Turn volume down before switching from English with no sound, to the others!) (just in case

)

Double-check your Samsung's settings and firmware, you may need an upgrade (Fox BDs come with a note saying: "To ensure the best possible experience, your Blu-ray disc player may need a firmware or software upgrade"), and your receiver's settings too.
Do you get any sound from the Samsung analog outputs when playing the English DTS MA track?

Brian or another of our Samsung owners will have more tips and info.

BTBuck1 · 12-18-2006, 07:21 AM

how are you connected? sounds like the receiver is set to analog decoding and not digital decoding.

theknub · 12-18-2006, 05:12 PM

brian, good call.

12-18-2006, 01:23 AM	#1
GMAN New Member Member since:Dec 2006	No Sound on The Omen? I just bought Omen on Blu-Ray. When I start the movie, there is no sound. There is sound on the DVD table of contents page and all of the features. Not when I start the movie. Is this a bad disc?

12-18-2006, 02:07 AM	#2
Deciazulado Site Manager Top contributor Member since:Aug 2006 Location:USiberia Home Theater Gallery:6 4K collection:1159 Blu-ray collection:7044 DVD collection:4040	The 2006 Omen has the following sound options: English: DTS HD 5.1 Master Lossless Audio Español: 5.1 Dolby Digital Français: 5.1 Dolby Digital Seems that you're not getting the DTS HD MA soundtrack Try selecting the French or Spanish track as an experiment, you'll probably get sound from those with no problem (Turn volume down before switching from English with no sound, to the others!) (just in case ) Double-check your Samsung's settings and firmware, you may need an upgrade (Fox BDs come with a note saying: "To ensure the best possible experience, your Blu-ray disc player may need a firmware or software upgrade"), and your receiver's settings too. Do you get any sound from the Samsung analog outputs when playing the English DTS MA track? Brian or another of our Samsung owners will have more tips and info. Last edited by thunderhawk; 12-18-2006 at 05:17 PM. Reason: French spelling mistake ;)

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
The original OMEN on 9/9	Blu-ray Movies - North America	GoBlu08	65	07-19-2024 11:00 PM
The Omen: Perfect!	Blu-ray Movies - North America	Josh	3	11-20-2006 11:12 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-18-2006, 07:21 AM	#3
BTBuck1 Blu-ray Samurai Member since:Jun 2006 Location:Oceanside, CA. Blu-ray collection:507 DVD collection:1	how are you connected? sounds like the receiver is set to analog decoding and not digital decoding.

12-18-2006, 05:12 PM	#4
theknub Blu-ray Guru Member since:May 2006	brian, good call.

Best Blu-ray Movie Deals