Yamaha RX-V463BL - Blu-ray Forum

Clapton101 · 05-12-2008, 10:37 PM

I just bought one this past weekend, but i need some honest opinions of weather it will suite my need, i am going to get the Klipsch Synergy F-3 for fronts and the B-3 for the rears, and of course the center and 10 in sub. Will this reciever get the job done, i only had so much in the budget, i hope it will, but honest opinions needed. I will be set up in my living room which is approx. 17.5x18.

Clapton101 · 05-13-2008, 10:13 AM

NO Help on this at all?

MacDaddyOJack · 05-13-2008, 11:25 AM

If someone told you it wouldnt get the job done, would you somehow have a larger budget?

The reciever is pushing 105 WPC, which is fine for the speakers you have. Only you can decide if it suits your needs though.

Clapton101 · 05-13-2008, 11:31 AM

I would not have a larger budget now, but i would have the diffrence in a couple of weeks so there for i would take the one i have back to BB and exchange it if i had to, I dont have the speakers now i am saving for them, so i would put my speakers on hold a little longer to inshure i had ample power to push them. I just want to make sure i bought correctly.

MacDaddyOJack · 05-13-2008, 11:44 AM

That amp should be fine with the speakers you have in mind. The towers can only handle 150 max so you should be set.

Clapton101 · 05-13-2008, 12:07 PM

Thank you very much for the help. I drive my wife nutz, I research things over and over and then i buy it and then second guess my self.

Clapton101 · 05-13-2008, 03:29 PM

Also do you usually have to recalibrate your TV when you start having things like your Blu-Ray and HD players run through your reciever and then to your tv? it seems like things are a little darker when run trhough the reciever than directly to the tv?

MacDaddyOJack · 05-13-2008, 03:34 PM

I'm not sure

I didn't notice any difference when I ran the HDMI signal through my reciever, but I have a different reciever than you do. My guess is no since the reciever is only repeating the video signal, but its possible. If you think its darker then it won't hurt to do another calibration.

kingofgrills · 05-13-2008, 04:48 PM

That Yamaha should work really well with the speakers you're pairing it with. Yamaha makes exceptional receivers, and the 463 is a pretty well featured budget receiver. I've owned several Yamaha surround receivers and amps through the years, and they've always done a great job making clean powerful amps. Plus, Yamaha engineers make their own DSP programs for surround modes, and they sound really immersive for movie soundtracks. With the HDMI inputs, and 1080p passthrough, you'll be all set for HD picture and sound from Blu-ray.

I think you'll be pleased.

05-12-2008, 10:37 PM	#1
Clapton101 Active Member Member since:Feb 2008 Home Theater Gallery:7 Blu-ray collection:235 Blu-ray reviews:2 Trading Score:5	Yamaha RX-V463BL I just bought one this past weekend, but i need some honest opinions of weather it will suite my need, i am going to get the Klipsch Synergy F-3 for fronts and the B-3 for the rears, and of course the center and 10 in sub. Will this reciever get the job done, i only had so much in the budget, i hope it will, but honest opinions needed. I will be set up in my living room which is approx. 17.5x18. Last edited by Clapton101; 05-13-2008 at 12:24 AM.

05-13-2008, 11:31 AM	#4
Clapton101 Active Member Member since:Feb 2008 Home Theater Gallery:7 Blu-ray collection:235 Blu-ray reviews:2 Trading Score:5	I would not have a larger budget now, but i would have the diffrence in a couple of weeks so there for i would take the one i have back to BB and exchange it if i had to, I dont have the speakers now i am saving for them, so i would put my speakers on hold a little longer to inshure i had ample power to push them. I just want to make sure i bought correctly. Last edited by Clapton101; 05-13-2008 at 11:33 AM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
My New 10" Yamaha Sub	Subwoofers	i-Dak	39	01-06-2010 01:41 AM
Yamaha 591BL	HTiB (all-in-one systems)	AJL3167	0	05-13-2009 09:14 PM
09 yamaha recievers	Receivers	d.white	11	03-28-2009 04:43 PM
Yamaha	Receivers	orean101	1	03-05-2009 12:51 PM
yamaha help	Receivers	d.white	6	02-19-2009 01:25 AM

05-13-2008, 10:13 AM	#2
Clapton101 Active Member Member since:Feb 2008 Home Theater Gallery:7 Blu-ray collection:235 Blu-ray reviews:2 Trading Score:5	NO Help on this at all?

05-13-2008, 11:25 AM	#3
MacDaddyOJack Blu-ray Guru Member since:Sep 2007 Location:Richmond, VA PSNetwork: MacDaddyOJack Trophy Level: 12(4%) Home Theater Gallery:12 Blu-ray collection:71 Blu-ray reviews:23 Trading Score:4	If someone told you it wouldnt get the job done, would you somehow have a larger budget? The reciever is pushing 105 WPC, which is fine for the speakers you have. Only you can decide if it suits your needs though.

05-13-2008, 11:44 AM	#5
MacDaddyOJack Blu-ray Guru Member since:Sep 2007 Location:Richmond, VA PSNetwork: MacDaddyOJack Trophy Level: 12(4%) Home Theater Gallery:12 Blu-ray collection:71 Blu-ray reviews:23 Trading Score:4	That amp should be fine with the speakers you have in mind. The towers can only handle 150 max so you should be set.

05-13-2008, 12:07 PM	#6
Clapton101 Active Member Member since:Feb 2008 Home Theater Gallery:7 Blu-ray collection:235 Blu-ray reviews:2 Trading Score:5	Thank you very much for the help. I drive my wife nutz, I research things over and over and then i buy it and then second guess my self.

05-13-2008, 03:29 PM	#7
Clapton101 Active Member Member since:Feb 2008 Home Theater Gallery:7 Blu-ray collection:235 Blu-ray reviews:2 Trading Score:5	Also do you usually have to recalibrate your TV when you start having things like your Blu-Ray and HD players run through your reciever and then to your tv? it seems like things are a little darker when run trhough the reciever than directly to the tv?

05-13-2008, 03:34 PM	#8
MacDaddyOJack Blu-ray Guru Member since:Sep 2007 Location:Richmond, VA PSNetwork: MacDaddyOJack Trophy Level: 12(4%) Home Theater Gallery:12 Blu-ray collection:71 Blu-ray reviews:23 Trading Score:4	I'm not sure I didn't notice any difference when I ran the HDMI signal through my reciever, but I have a different reciever than you do. My guess is no since the reciever is only repeating the video signal, but its possible. If you think its darker then it won't hurt to do another calibration.

05-13-2008, 04:48 PM	#9
kingofgrills Blu-ray Guru Top ranked HT gallery Member since:Dec 2007 Location:PDX Home Theater Gallery:31 4K collection:5 Blu-ray collection:81 Trading Score:31	That Yamaha should work really well with the speakers you're pairing it with. Yamaha makes exceptional receivers, and the 463 is a pretty well featured budget receiver. I've owned several Yamaha surround receivers and amps through the years, and they've always done a great job making clean powerful amps. Plus, Yamaha engineers make their own DSP programs for surround modes, and they sound really immersive for movie soundtracks. With the HDMI inputs, and 1080p passthrough, you'll be all set for HD picture and sound from Blu-ray. I think you'll be pleased.

Best Blu-ray Movie Deals