BDP-S300 only says "No Disc" - Blu-ray Forum

Concord · 06-01-2008, 09:59 PM

I've had my player for six months with just a minor freeze here and there. Did a firmware upgrade about 3 months ago. Halfway through watching a film, the player freezes up again. After a re-boot however, it now will not recognize ANY disc whatsoever. No matter what I put in--DVD or Blu Ray, the "No Disc" display appears.

Anyone else have this problem?

fredreed · 06-03-2008, 01:21 AM

Is this with both blu-ray's and dvds? Does any disc read at all? Call Sony first and if that doesn't work try calling the store where you brought it.

tron3 · 06-03-2008, 01:18 PM

Unplug it and press the power button to help drain the residual electricity. Plug it back in.

I forget if it has a reset button, but look for it under the front panel. Perhaps the back, maybe even the bottom.

You have nothing to loose in trying either or both of those things.

Concord · 06-03-2008, 05:58 PM

It's both---I tried calling Sony and it did need a firmware upgrade, so I downloaded the files and burned them but the player didn't read THAT disc either. I can understand the firmware affecting newer discs, but every single disc sounds like it's something a little more complicated. Plus it died after a freeze--meaning the disc it crapped out on was playing okay to begin with.

I had Sony send me their own firmware disc so I'll see what happens when that arrives. I unplugged it a few times but I'll try the power drain as well.

blurayisking · 06-03-2008, 06:28 PM

Concord:

I've repeatedly updated the BDP-S300 player whenever a new firmware version has been issed and I've never had what you're experiencing.

Something tells me you're player needs to be checked by Sony.

Good luck.

WickyWoo · 06-03-2008, 07:00 PM

Your disc drive died

speedygobunny · 12-20-2008, 12:29 AM

Your disc drive drive is most likely fine.

I have a BDP-S300 and after using about a year encountered this problem. I ejected the tray and sprayed air-duster all the way inside the unit (from the tray opening) and the problem went away.

ricsimonis · 12-22-2009, 06:33 PM

I'm sorry to say that my S300 has bit the dust.

The drive is no longer spinning the disc.
Has anyone attempted to replace the drive itself? It is an older IDE interface drive and I'm not having any luck finding a BD-ROM drive with an IDE interface. I tried an older Pioneer drive but got "DRIVE ERR". This is probably a project for another day.

w3syt · 12-23-2009, 03:38 PM

Called Sony, she told me where to ship it. Return paperwork said "replaced BD Drive". All is well.

06-01-2008, 09:59 PM	#1
Concord New Member Member since:Jun 2008	BDP-S300 only says "No Disc" I've had my player for six months with just a minor freeze here and there. Did a firmware upgrade about 3 months ago. Halfway through watching a film, the player freezes up again. After a re-boot however, it now will not recognize ANY disc whatsoever. No matter what I put in--DVD or Blu Ray, the "No Disc" display appears. Anyone else have this problem?

06-03-2008, 01:21 AM	#2
fredreed Senior Member Member since:May 2007 Blu-ray reviews:1	BDP-S300 only says no-disc Is this with both blu-ray's and dvds? Does any disc read at all? Call Sony first and if that doesn't work try calling the store where you brought it.

12-22-2009, 06:33 PM	#8
ricsimonis New Member Member since:Apr 2009	Dead S300 I'm sorry to say that my S300 has bit the dust. The drive is no longer spinning the disc. Has anyone attempted to replace the drive itself? It is an older IDE interface drive and I'm not having any luck finding a BD-ROM drive with an IDE interface. I tried an older Pioneer drive but got "DRIVE ERR". This is probably a project for another day.

12-23-2009, 03:38 PM	#9
w3syt Junior Member Member since:Jan 2008 Location:Pittsburgh,PA,USA	My 300 died at 11.5 months Called Sony, she told me where to ship it. Return paperwork said "replaced BD Drive". All is well.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Warner releasing "Gigi" & "An American in Paris" DVDs Sep 08 - BDs "early 09"	Blu-ray Movies - North America	JBlacklow	13	01-24-2020 04:41 AM
BDP-S360 - Should I set audio settings to "Mix" or "Direct" for best possible sound?	Blu-ray Players and Recorders	homer860	4	12-29-2009 05:03 PM
Sony S300 needs upgrade for "IronMan"	Blu-ray Players and Recorders	Smokin' T	50	09-22-2008 08:01 PM
UK gets "Kill Bill" 1&2, "Pulp Fiction", "Beowulf", "Jesse James", and more in March?	Blu-ray Movies - North America	JBlacklow	21	12-07-2007 11:05 AM

06-03-2008, 01:18 PM	#3
tron3 Blu-ray Samurai Member since:Aug 2004 Location:New Jersey Blu-ray reviews:3	Unplug it and press the power button to help drain the residual electricity. Plug it back in. I forget if it has a reset button, but look for it under the front panel. Perhaps the back, maybe even the bottom. You have nothing to loose in trying either or both of those things.

06-03-2008, 05:58 PM	#4
Concord New Member Member since:Jun 2008	It's both---I tried calling Sony and it did need a firmware upgrade, so I downloaded the files and burned them but the player didn't read THAT disc either. I can understand the firmware affecting newer discs, but every single disc sounds like it's something a little more complicated. Plus it died after a freeze--meaning the disc it crapped out on was playing okay to begin with. I had Sony send me their own firmware disc so I'll see what happens when that arrives. I unplugged it a few times but I'll try the power drain as well.

06-03-2008, 06:28 PM	#5
blurayisking Active Member Member since:Oct 2007 Blu-ray reviews:1	Concord: I've repeatedly updated the BDP-S300 player whenever a new firmware version has been issed and I've never had what you're experiencing. Something tells me you're player needs to be checked by Sony. Good luck.

06-03-2008, 07:00 PM	#6
WickyWoo Blu-ray Champion Member since:May 2007 Trading Score:2	Your disc drive died

12-20-2008, 12:29 AM	#7
speedygobunny New Member Member since:Dec 2008	Your disc drive drive is most likely fine. I have a BDP-S300 and after using about a year encountered this problem. I ejected the tray and sprayed air-duster all the way inside the unit (from the tray opening) and the problem went away.

Best Blu-ray Movie Deals