changed stuff around, now i have problems.. help? - Blu-ray Forum

sinister184 · 11-17-2009, 03:49 AM

Since i got my new TV ive been having problems. 1) ive noticed that for some damn reason my Onkyo 806 will not do OSD in 1080p, umm why!?! and i hooked my 360 up via HDMI to the receiver and i have no sound. Its not cable issue, or a problem with my wiring. Any thoughts?

liquidice · 11-17-2009, 05:57 AM

maybe you have some settings within the receiver that got reset after plugging and unplugging stuff. It's possible your receiver didn't retain any previous settings, and now you need to re-do all of that. Check it out, only thing I can think of.

HAMP · 11-17-2009, 07:00 AM

Quote:

Originally Posted by sinister184

Since i got my new TV ive been having problems. 1) ive noticed that for some damn reason my Onkyo 806 will not do OSD in 1080p, umm why!?! and i hooked my 360 up via HDMI to the receiver and i have no sound. Its not cable issue, or a problem with my wiring. Any thoughts?

In your settings on the receiver, make sure you have the sound set for HDMI into and out that port.

If you have not changed any settings then you’re optical or which ever you had before for sound is still set as that. Just because you changed the cable the settings do not auto config from what you set.

I'm not sure, but also check your 360 to see if you have to config the audio out. I never did have the HDMI on my 360, so I'm really not sure, I'm just guessing.

sinister184 · 11-17-2009, 12:04 PM

apparently both are common problems after looking online. The 360 is also having HDCP problems over HDMI which is also crap. The XBR9 is HDCP complaint all day. gonna have to (GULP) call MS support and see what they say. b/c it wont even let me stream netflix.

quest88 · 11-17-2009, 12:21 PM

Well that sucks. I hope they can help you out.

sinister184 · 11-17-2009, 01:30 PM

nope bunch of idiots. i managed to fix the xbox sound problem myself though. I knew what the problem was all along i just didnt know how to change it, and the reps are so damn dumb. all they do is read crap suggestions from a computer screen. the display settings were stuck on DVI, despite re4settingf the video settings multitple times, which obviously has no sound and is not HDCP compatible. But i finally figured out how to get it over to HDMI and all is well with that. Still no luck on the OSD though. After reading the Onkyo manual it just says may not be available for HDMI and component IN applications or some such thing. i guess i can live without that. just liked it better on.

dewd · 11-17-2009, 02:08 PM

On my 705, OSD is not available over HDMI except for SETUP. I would assume the 806 works the same way.

sinister184 · 11-17-2009, 02:18 PM

Quote:

Originally Posted by dewd

On my 705, OSD is not available over HDMI except for SETUP. I would assume the 806 works the same way.

anything in 720p or below works fine for me, just not 1080p

dewd · 11-17-2009, 02:29 PM

That seems odd... Definitely different than mine.

sinister184 · 11-17-2009, 08:31 PM

ugh... im still getting HDCP issues when i try to stream netflix. My XBR is HDCP complaint, again gonna have to try and figure this crap out

11-17-2009, 03:49 AM	#1
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	changed stuff around, now i have problems.. help? Since i got my new TV ive been having problems. 1) ive noticed that for some damn reason my Onkyo 806 will not do OSD in 1080p, umm why!?! and i hooked my 360 up via HDMI to the receiver and i have no sound. Its not cable issue, or a problem with my wiring. Any thoughts?

11-17-2009, 12:21 PM	#5
quest88 Expert Member Member since:Jan 2007 Location:San Diego CA Home Theater Gallery:19 Blu-ray collection:537	Well that sucks. I hope they can help you out. Last edited by quest88; 11-17-2009 at 02:26 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
I would like to get my name changed.	Feedback Forum	Zero_Cool	20	02-03-2010 12:51 PM
Stuff that Defeats Stuff Thread	General Chat	igotcabada	161	08-16-2009 04:39 AM
I can't believe how much times have changed	General Chat	Batman1980	20	04-15-2009 01:46 PM
Why is the ratio changed?	Home Theater General Discussion	obriensg1	3	08-14-2007 07:01 PM

11-17-2009, 05:57 AM	#2
liquidice Mad Scientist Top ranked HT gallery Member since:Jun 2008 Location:Milwaukee Home Theater Gallery:43 Blu-ray collection:384 Blu-ray reviews:6	maybe you have some settings within the receiver that got reset after plugging and unplugging stuff. It's possible your receiver didn't retain any previous settings, and now you need to re-do all of that. Check it out, only thing I can think of.

11-17-2009, 12:04 PM	#4
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	apparently both are common problems after looking online. The 360 is also having HDCP problems over HDMI which is also crap. The XBR9 is HDCP complaint all day. gonna have to (GULP) call MS support and see what they say. b/c it wont even let me stream netflix.

11-17-2009, 01:30 PM	#6
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	nope bunch of idiots. i managed to fix the xbox sound problem myself though. I knew what the problem was all along i just didnt know how to change it, and the reps are so damn dumb. all they do is read crap suggestions from a computer screen. the display settings were stuck on DVI, despite re4settingf the video settings multitple times, which obviously has no sound and is not HDCP compatible. But i finally figured out how to get it over to HDMI and all is well with that. Still no luck on the OSD though. After reading the Onkyo manual it just says may not be available for HDMI and component IN applications or some such thing. i guess i can live without that. just liked it better on.

11-17-2009, 02:08 PM	#7
dewd Active Member Member since:Aug 2009 Location:Mechanicsburg, PA Home Theater Gallery:13 Blu-ray collection:25	On my 705, OSD is not available over HDMI except for SETUP. I would assume the 806 works the same way.

11-17-2009, 02:29 PM	#9
dewd Active Member Member since:Aug 2009 Location:Mechanicsburg, PA Home Theater Gallery:13 Blu-ray collection:25	That seems odd... Definitely different than mine.

11-17-2009, 08:31 PM	#10
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	ugh... im still getting HDCP issues when i try to stream netflix. My XBR is HDCP complaint, again gonna have to try and figure this crap out

Best Blu-ray Movie Deals