|
|
![]() |
||||||||||||||||||||
|
Best iTunes Music Deals
|
Best iTunes Music Deals, See All the Deals » |
Top deals |
New deals
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() $6.99 | ![]() $6.99 | ![]() $6.99 | ![]() $44.99 | ![]() $19.99 | ![]() $9.99 | ![]() $9.99 | ![]() $9.99 | ![]() $9.99 | ![]() $9.99 | ![]() $9.99 | ![]() $9.99 |
![]() |
#1 | |
Blu-ray Champion
|
![]()
Additional reading:
https://forum.blu-ray.com/audio-theo...orrection.html https://forum.blu-ray.com/audio-theo...hnologies.html https://forum.blu-ray.com/speakers/1...ubwoofers.html. https://forum.blu-ray.com/pre-pro-am...h-fbq6200.html I am certain that most people who have an interest in audio and home theater are well aware of the importance of equalization and room correction in addition to wall treatments and bass traps. In a typical small home theater room, the sound waves interact heavily with the boundaries and other obstacles in the room. This interaction is more pronounced in the case of lower frequency bass waves. These waves have very long wavelengths that are several times larger than the dimendions of a typical home theater room. As a result of these interaction between the room boundaries and the lower frequency waves, standing waves are created. Additionally, there will be room gain in the lower frequencies below 100Hz. ![]() These standing waves create room modes. The main result of these room modes is that the bass will become uneven in the room. At some locations, the bass will be too loud and at some locations, it will be very difficult to hear any bass. One solution is to use multiple subwoofers (two or four). Another solution is to use bass traps in the room. The third solution is equalization, particularly equalization in the lower frequencies. In the vast majority of home theater rooms, equalization and speaker level setting is handled by auto calibration programs such as Audyssey. Additionally, some users may use manual bass equalization with equipment such as the Velodyne SMS-1 or sofware programs such as REW or TrueRTA and calibrated microphones. Because the most important problems in small home theater rooms are experienced in the lower frequencies, it is best to use equipment that can handle one-tenth to one-twenty fourth per octave equalization for frequencies below 200Hz. Professional users have a different problem. Most of them have to deal with much larger rooms such as movie theaters, auditoriums, and indoor stadiums. For them, bass is not the main problem. Dialog intelligibility, reverberation, feedback, and other higher frequency problems become much more important. As a result, we see an abundant numbers of one-third per octave graphical equalizers in the pro market. Using these manual equalizers by ear alone is not sufficient. One option is to use an SPL meter and a lot of patience. Unfortunately, many SPL meters are not very reliable across all frequencies and doing the work manually is tedious and subject to error. I recently upgraded my two-channel room with a tube pre-amp, a CD player with superb DAC, a better turntable/cartridge, and two super tower DIY speakers with 15" amplified subwoofers. Although the results were excellent, I realized that the only thing missing from my two-channel room was equalization. The room is rather large and open. Its dimensions are:
![]() After some search, I ended up buying the Behringer UltraGraph FBQ6200. Initially, I tried to use one-third octave test tones and two SPL meters (a digital Radio Shack purchased over fifteen years ago and an American Recorder Technologies SPL meter purchased a couple of years ago) to equalize the room. There are basically three types of problems when you do manual equalization:
PHONIC PAA3 HANDHELD AUDIO ANALYZER WITH USB INTERFACE ![]() ![]() ![]() Website: http://www.phonic.com/en/paa3.html Manual: https://phonic.boxcn.net/shared/fx8ydgar4a Reviews: http://mixonline.com/gear/reviews/au..._paa_portable/ http://www.workingdj.com/2009/06/28/...-audio-tester/ Price: The normal price is $499. Ocassionally, you may find it at dealers such as Amazon or Ebay for $400. Where to Buy: http://www.amazon.com/Phonic-Hand-He.../dp/B0009RK7YS http://www.ebay.com/sch/i.html?_odkw...+PAA3&_sacat=0 http://www.bhphotovideo.com/c/produc...eld_Audio.html http://www.musiciansfriend.com/acces...ource=3WWRWXMB http://www.samedaymusic.com/product--PHOPAA3 http://www.allprosound.com/catalog/p...honic-PAA3.htm Controls and Display ![]() ![]() Quote:
With 31-band real-time spectrum analysis, Sound Pressure Level and dBu / dBV / line voltage measurement, EQ setting, phase checking, and reverb time analyzation, the PAA3 is the ideal companion for all sound engineers. This personal audio assistant is battery powered (4 AA size), with a built in microphone, and XLR inputs and outputs, ensuring all audio analyzing situations are possible. With the PAA3, you will conquer the acoustics of all environments with precision and ease. ![]() ![]() RTA (REAL TIME ANALYZER) - ACOUSTIC This function analyzes the audio received through either the built-in mic or Line In connection, divided into 31-bands at 1/3 octave intervals, and displays the relevent information on a bar graph that shows the decibel level of each band of sound from 20 Hz to 20 kHz in four different response times (35 ms, 125 ms, 250 ms, and 1 sec) and in three weighting types (A weighting, C weighting and Flat). SPL METER This feature of the PAA3 gives users an accurate measurement of the overall “loudness” of their sound, measured in decibels (dB). This is a true RMS-measurement, using standard display time average, and standard A, C, and Flat weightings. RT60 (REVERB TIME ANALYZING) The RT60 function of the PAA3 is easy enough to understand: it is basically the time it takes for a signal to drop 60 dB. Getting the average of many different RT60 calculations from around a room allows users to get an idea as to how much absorption or reflection of audio the room provides. Depending on your needs, you may wish to have a high or low RT60 measurement. For example, for public speaking, an RT60 measurement of less than 1 second is preferable, as to have a clear, concise voice conveyed to the audience. With choirs or instrumental music, an RT60 measurement of greater than 1.5 seconds may be appropriate. It all depends on your needs. RTA (REAL TIME ANALYZER) - ELECTRICAL SIGNAL By simply connecting an XLR jack to the PAA3’s in jack, the RTA function can accurately measure your signal. Level Meter: Measure the line voltage level in units of dBu, dBV, and AC voltage, using standard A, C, or flat weightings (under normal conditions, flat is preferable). Using the PAA3 to measure DC voltage may damage the PAA3 and will void the warranty.MEMORY The user can save up to 10 sets of measured data (1 to 10), as well as 6 averaged sets (A to F), into the memory of the PAA3, allowing them to be used later for further analysis or uploading to your computer. EQ SETTING The EQ setting of audio system will vary from one venue to another. The ultimate goal in setting your EQ is to create a completely flat response ans to eliminate every possible source of feedback. Weighting: Any audio analyzer needs to be designed so that it hears sound properties in the same way as humans. Generally, the sensitivity of human hearing is restricted to the frequency range of 20 Hz to 20 kHz. The human ear, however, is most sensitive to sounds in the range of 500 Hz to 8 kHz. The ear becomes progressively less sensitive to sound out of this range. To account for this limitation of human hearing, many audio analyzers, including the PAA3, incorporate a filtering of acoustic signals according to frequency. This filtering (weighting type) is devised to correspond to the varying sensitivity of the human ear to sound over the audible frequency range. The PAA3 comes with both A-weighting and C-weighting standardized by the ANSI (American National Standards Institute). A-weighting is the most frequently used weighting type and is used for measuring lower sound levels, while C weighting is best suited for higher sound levels. The user can set the weighting for measurements in dBu, dBV or voltage.PHASE CHECK Measuring the phase of a signal allows you to figure out whether a speaker is correctly wired. A polarity signal is usually needed when checking the phase of a speaker or ensure that an output connection is correct. GENERATOR The PAA3 can send out pink noise, a polarity signal, and a 1 kHz tone, all of which is sent out via the Male XLR connector (on the bottom of the PAA3) to any external system, at a level of -10 dBu. SIMULTANEOUS OPERATION WITH DESKTOP There are many advantages to being able to connect the PAA3 with your desktop computer or notebook. It allows remote operation of the PAA3, for one, which is particularly useful when taking measurements in areas that require an absence of any individuals. It also allows users to save and print data stored in the PAA3’s memory. The PAA3 software, supported by Windows 98 and above, can be found on the included CD (which, incidently, also contains 26 testing signals). With this program, most functions are easily accessible through a menu identical to that of the PAA3 device itself. ![]() Last edited by Big Daddy; 01-26-2013 at 12:52 AM. |
|
![]() |
|
|
![]() |
|
|