|
|
![]() |
||||||||||||||||||||
|
Best Blu-ray Movie Deals
|
Best Blu-ray Movie Deals, See All the Deals » |
Top deals |
New deals
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() $82.99 1 hr ago
| ![]() $74.99 | ![]() $101.99 17 hrs ago
| ![]() $39.02 33 min ago
| ![]() $23.79 12 hrs ago
| ![]() $124.99 1 day ago
| ![]() $24.96 | ![]() $70.00 | ![]() $29.95 | ![]() $35.99 | ![]() $99.99 | ![]() $24.96 |
![]() |
#1 |
Active Member
|
![]()
I was over a friends house watching a movie and was impressed by his sub, which was a Velodyne 1012B. I did some searching when I got home and found a Velodyne VA-1012XII for a very good price in great condition. I currently have a Sony SA-WM40 12" subwoofer which does a pretty good job in my setup. I've listed the specs below, I'm waiting on the Velodyne to arrive via fedex. My receiver has the ability to support 4 subs I believe so I could hook them both up across the room from each other. Was just curious if Velodyne would be a huge improvement over the Sony? I know they are both older units, the Sony is ported and the Velo has a 12" passive radiator...
Sony Specifications System Type Active Subwoofer (magnetically shielded design) Speaker unit Woofer: 30 cm dia. (12 in.), cone type Continuous RMS output Canadian model (0.8%) 120 W European model (DIN) 120 W Other models (0.8%) 100 W Reproduction frequency range 20 Hz – 170 Hz High frequency cut-off frequency 50 Hz – 170 Hz Phase selector NORMAL, REVERSE Inputs Input jacks LINE IN: input pin jack SPEAKER IN: input terminals Output jacks LINE OUT: output pin jack SPEAKER OUT: output terminals General Power requirements Canadian model 120 V AC, 60 Hz European model 220 - 230 V AC, 50/60 Hz Other models 220 - 240 V AC, 50/60 Hz Power consumption 90 W Dimensions Approx. 360 x 425 x 430 mm (w/h/d) (14 1/4 x 16 3/4 x 17 in.) Mass 18 kg (36lb 11oz) Velodyne SPECS VA-1012Xii Cabinet (inc!. legs): 17.5'x16.S'x16.5' Frequency Response: 35hz-200hz +/- 3 dB High Pass Crossover: 80hz or 100hz (6 dB/octave) .... Low Pass Crossover: 40hz - 120hz (6 dB/octave, 24 dB ultimate). Amplifier: Class A/B, 100 watts, 250 watts peak ............ ......... .. .. Woofer: 10" forward firing Magnet: 55 oz. Voice Coil: 2" Passive Radiator: 12" downward firing Inputs: line-level & speaker·level Outputs: line-level & speaker·level .. Warranty One year (parts & labor) Weight: 58 Ibs. (approx.) Last edited by MobileES; 06-16-2016 at 06:07 PM. |
![]() |
![]() |
#2 | |
Blu-ray Count
|
![]() Quote:
I've had that sub, and there's another member here who also uses it still in his system. I think it's a pretty good sub, and you should notice a nice improvement over the Sony, if properly set up. ![]() ![]() |
|
![]() |
Thanks given by: | hometheatergeek (06-17-2016) |
![]() |
#3 | |
Active Member
|
![]() Quote:
![]() |
|
![]() |
![]() |
#6 |
Blu-ray Count
|
![]() |
![]() |
![]() |
#10 |
Blu-ray Count
|
![]()
Good call, and congrats!
![]() I was going to suggest that route, but I figured you had already purchased the 1012 & I didn't want to upset you. ![]() Anyway, congrats again! Now let's see some pics, and don't forget to change your sig. ![]() ![]() |
![]() |
![]() |
#11 | |
Active Member
|
![]() Quote:
![]() |
|
![]() |
Thanks given by: | Billy13 (06-18-2016) |
![]() |
#12 |
Blu-ray Count
|
![]() |
![]() |
![]() |
#13 |
Active Member
|
![]()
Well this sucks, the 1012 showed up today I actually really like it
![]() Last edited by MobileES; 06-22-2016 at 04:19 PM. |
![]() |
|
|
![]() |
![]() |
|
|