Samsung 2550, DTS HDMA 7.1 and SBL/SBR receiver input lamps - Blu-ray Forum

wspann · 01-01-2009, 04:10 PM

I have an issue with DTS HD MA 7.1 BluRay (Hell Boy II) illuminating all the speaker input lights on my Yamaha RX-V663 EXCEPT the SBL/SBR.

The 2550 is running fine. It is attached to my 663 via HDMI (only...no other connections). The audio set-up is set to Bitstream Audiophile, video set to HDMI/24 fps. DD True HD 5.1 and DD HD MA 5.1 works fine.

The Yammie is set-up correctly and the menu is adjusted properly. YPAO set-up mic/program shows no errors. I have been all over every option, and on the phone with tech support until my head hurts.

Here's the odd thing: when I play the DTS HD MA 7.1, I do, in fact, get 7.1 sound out of all 8 speakers, including SBL/SBR. The sound track on the SBL/SBR speakers is different from the SR/SL. The DTS HD MA icon illuminates.

Last night, all 8 icons lit briefly while the disc was loading and then the SBL/SBR went out.

The issue is simply that either the disc or the player isn't sending the proper flag to the receiver to illuminate those SBL/SBR icons.

To t-shoot, I hooked the 2550 up via the 7.1 analog outputs to the Yammie and all eight icons lit, and sound came from all 8 speakers again, although it was only a DTS signal and not DTS HD MA.

Is this an issue with the DVD or the player in everyone's expert opinion??? I am waiting for Netflix to send me another 7.1 DTD HD MA disc so I can see if it is just the disc.

wspann · 01-01-2009, 11:35 PM

Duh.

Opips2 · 01-02-2009, 12:41 AM

I understand, I try help you but my receiver is Harman Kardon AVR-254. It's is not same your a receiver.

I don't have a Blu-ray player. only PS3

I've own "HELL Boy II" BluRay with DTS HD MA 7.1
I use a HDMI 1.3 cable then I put played on PS3 to the receiver display "PCM MultiChannel" to 3.4.1 is 7.1 ch

I want to see my receiver display on Dolby TrueHD or DTS HD is only bitstream with HDMI 1.3 cable.

I waiting new brand 2009 or 2010 blu-player.

01-01-2009, 04:10 PM	#1
wspann New Member Member since:Jan 2009	Samsung 2550, DTS HDMA 7.1 and SBL/SBR receiver input lamps I have an issue with DTS HD MA 7.1 BluRay (Hell Boy II) illuminating all the speaker input lights on my Yamaha RX-V663 EXCEPT the SBL/SBR. The 2550 is running fine. It is attached to my 663 via HDMI (only...no other connections). The audio set-up is set to Bitstream Audiophile, video set to HDMI/24 fps. DD True HD 5.1 and DD HD MA 5.1 works fine. The Yammie is set-up correctly and the menu is adjusted properly. YPAO set-up mic/program shows no errors. I have been all over every option, and on the phone with tech support until my head hurts. Here's the odd thing: when I play the DTS HD MA 7.1, I do, in fact, get 7.1 sound out of all 8 speakers, including SBL/SBR. The sound track on the SBL/SBR speakers is different from the SR/SL. The DTS HD MA icon illuminates. Last night, all 8 icons lit briefly while the disc was loading and then the SBL/SBR went out. The issue is simply that either the disc or the player isn't sending the proper flag to the receiver to illuminate those SBL/SBR icons. To t-shoot, I hooked the 2550 up via the 7.1 analog outputs to the Yammie and all eight icons lit, and sound came from all 8 speakers again, although it was only a DTS signal and not DTS HD MA. Is this an issue with the DVD or the player in everyone's expert opinion??? I am waiting for Netflix to send me another 7.1 DTD HD MA disc so I can see if it is just the disc.

01-01-2009, 11:35 PM	#2
wspann New Member Member since:Jan 2009	Never mind, it was just the disc. Duh.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Samsung 61' DLP Lamps	Rear Projection TVs	drichter33	2	01-31-2010 11:40 AM
Samsung BDP-2500/2550 finally decode DTS-HDMA/HR with new 2.4 update...	Blu-ray Players and Recorders	Semp1	5	01-07-2009 06:03 PM
Disney 7.1 Dts-hdma	Blu-ray Movies - North America	pdawg2003_03	40	10-07-2008 04:56 AM
All Movies In Dts-hdma? Yes Or No	Blu-ray Movies - North America	pdawg2003_03	69	09-21-2008 06:35 PM
7.1 LPCM vs 7.1 DTS-HDMA	Audio Theory and Discussion	KingRadicalPhil	6	08-21-2008 11:24 PM

01-02-2009, 12:41 AM	#3
Opips2 Special Member Member since:Nov 2008 Location:Edmonton, AB Home Theater Gallery:6 Blu-ray collection:175 Blu-ray reviews:10 Trading Score:1	I understand, I try help you but my receiver is Harman Kardon AVR-254. It's is not same your a receiver. I don't have a Blu-ray player. only PS3 I've own "HELL Boy II" BluRay with DTS HD MA 7.1 I use a HDMI 1.3 cable then I put played on PS3 to the receiver display "PCM MultiChannel" to 3.4.1 is 7.1 ch I want to see my receiver display on Dolby TrueHD or DTS HD is only bitstream with HDMI 1.3 cable. I waiting new brand 2009 or 2010 blu-player.

Best Blu-ray Movie Deals