Steelbook Protective Sleeves Master Thread

[darkness2918]

Originally Posted by Steelbook Indy

Is that the best one can do? $10 for 6 cases seems high.

You can get ones that are just as good from eBay that are 20 for $21.50 shipped. These are the ones I use.

http://www.ebay.com/itm/25-Steelbook...cAAOxyi-ZTWwKd

[rickah88]

Originally Posted by Samus Aran

I just put my opened steels in them and put them on the shelf. I guess it ultimately doesn't matter, but I had left the film on with the first batch, even the less-than-perfect ones. But this batch has the same issue on every single one of them. The film would probably catch and peel off when I pull the steelbook off the shelf.

I would definitely remove the film. It shouldn't take you long. I'm surprised it didn't ripple or peel while you were constructing the shells.

[Ranavalone]

Originally Posted by Samus Aran

I just put my opened steels in them and put them on the shelf. I guess it ultimately doesn't matter, but I had left the film on with the first batch, even the less-than-perfect ones. But this batch has the same issue on every single one of them. The film would probably catch and peel off when I pull the steelbook off the shelf.

It really isn't an "issue". The wrinkles are there to make it easier to peel the thin plastic film off.

[rsaotome]

Originally Posted by Steelbook Indy

Is that the best one can do? $10 for 6 cases seems high.

You could also try VideoGameBoxProtectors.

http://www.videogameboxprotectors.com/store/4569532134

Couldn't link directly, so it's under Movies -> Blu-ray -> Blu-ray G2 Steelbooks.

I've been using them for all my standard G2 steelbooks, if you want to keep the jcard just fold it up & put it inside the steelbook.

[zarquon]

Originally Posted by rsaotome

You could also try VideoGameBoxProtectors.



http://www.videogameboxprotectors.com/store/4569532134



Couldn't link directly, so it's under Movies -> Blu-ray -> Blu-ray G2 Steelbooks.



I've been using them for all my standard G2 steelbooks, if you want to keep the jcard just fold it up & put it inside the steelbook.

I use those, they're very nice. They'll fit with a J-card just fine, as long as it's unsealed. I've never tried a sealed steelbook, it would probably be too tight...

[evophile]

Does anyone know of the Standard G2 Steelbook size from RetroProtection will fit the Best Buy Disney Exclusives sealed w/ Jcard?

I had made a large purchase from Steelbook Central of SC3s and it turns out some are too thick to fit them and am now looking for another solution.

I saw a user a while back got some there and he showed Logan in there, but my main issue seems to be with Disney/Marvel ones.
I see RetroProtection also has larger sizes for Lentis and Fullslips but I worry those may be too large. Thanks!

[IXOYE1989]

Anyone know if SCF3 will fit The Pianist KimchiDVD exclusive unsealed? Is steelbook central the only one that offers this size?

[tono06]

Originally Posted by IXOYE1989

Anyone know if SCF3 will fit The Pianist KimchiDVD exclusive unsealed? Is steelbook central the only one that offers this size?

i have my lenti in a SCF3 and it fits perfect!

[Oarsman05]

Originally Posted by darkness2918

You can get ones that are just as good from eBay that are 20 for $21.50 shipped. These are the ones I use.

http://www.ebay.com/itm/25-Steelbook...cAAOxyi-ZTWwKd

These are the same size as 4K steelbooks, right?

[IXOYE1989]

Originally Posted by tono06

i have my lenti in a SCF3 and it fits perfect!

Do you know if the non-lenticular version (full slip) is the same size as the lenticular version? I have the full slip one:

[tono06]

Originally Posted by IXOYE1989

Do you know if the non-lenticular version (full slip) is the same size as the lenticular version? I have the full slip one:

That I don't know bud! Sorry!

[jeffster15]

Originally Posted by IXOYE1989

Do you know if the non-lenticular version (full slip) is the same size as the lenticular version? I have the full slip one:

The Full slip is taller and thicker than the lenti. It fits perfectly in an SCF2.

[IXOYE1989]

Originally Posted by jeffster15

The Full slip is taller and thicker than the lenti. It fits perfectly in an SCF2.

Thank you so much!!!

[jeffster15]

Originally Posted by IXOYE1989

Thank you so much!!!

No Problem

[Cabanon]

Originally Posted by C.C. 95

SC6 will fit Jumbo. SCF3 is SMALLER than SCF2. Metalpaks will fit a standard SCF1 or SC2
Attachment 172673

im kinda confused with the size of the Hobbit 3D extended eidtion https://www.blu-ray.com/movies/The-H...lu-ray/123354/
The size are 140 (w) x 19 (d) x 178 (h) or 5.5" x 3/4 x 7" and none of these size are a perfect match; not tall enough, too small, or too much depth.

SCF1 Slipcover Dimensions 138 (w) x 17 (d) x 173 (h) mm
SCF2 Slipcover Dimensions: 140.5 (w) x 23(d) x 175 (h) mm
SCF3 Slipcover Dimensions: 140.5 (w) x 18.5 (d) x 176 (h) mm
SCF4 Slipcover Dimensions: 140.5 (w) x 26 (d) x 177 (h) mm
SCF5 Slipcover Dimensions: 138 (w) x 17 (d) x 191.5 (h) mm
SC6 Slipcover Dimensions: 136 (w) x 30.5 (d) x173 (h) mm

is there any other size i'm not aware of ?

[darkness2918]

Originally Posted by Oarsman05

These are the same size as 4K steelbooks, right?

I have all my steels in them, 4K & 2D. Open & sealed they fit fine.

[CasuallyDressed]

Originally Posted by Cabanon

im kinda confused with the size of the Hobbit 3D extended eidtion https://www.blu-ray.com/movies/The-H...lu-ray/123354/
The size are 140 (w) x 19 (d) x 178 (h) or 5.5" x 3/4 x 7" and none of these size are a perfect match; not tall enough, too small, or too much depth.

SCF1 Slipcover Dimensions 138 (w) x 17 (d) x 173 (h) mm
SCF2 Slipcover Dimensions: 140.5 (w) x 23(d) x 175 (h) mm
SCF3 Slipcover Dimensions: 140.5 (w) x 18.5 (d) x 176 (h) mm
SCF4 Slipcover Dimensions: 140.5 (w) x 26 (d) x 177 (h) mm
SCF5 Slipcover Dimensions: 138 (w) x 17 (d) x 191.5 (h) mm
SC6 Slipcover Dimensions: 136 (w) x 30.5 (d) x173 (h) mm

is there any other size i'm not aware of ?

Assuming that the US Hobbit 3D EE is the same size as the UK one, then it's your average garden variety jumbo steelbook. SC6 will be fine (that's what I've got mine in).

[Cabanon]

Originally Posted by CasuallyDressed

Assuming that the US Hobbit 3D EE is the same size as the UK one, then it's your average garden variety jumbo steelbook. SC6 will be fine (that's what I've got mine in).

ok. could you measure it ? otherwise i'll go with SCF4 since SC6 is not high enough.

[C.C. 95]

Originally Posted by Cabanon

im kinda confused with the size of the Hobbit 3D extended eidtion https://www.blu-ray.com/movies/The-H...lu-ray/123354/
The size are 140 (w) x 19 (d) x 178 (h) or 5.5" x 3/4 x 7" and none of these size are a perfect match; not tall enough, too small, or too much depth.

SCF1 Slipcover Dimensions 138 (w) x 17 (d) x 173 (h) mm
SCF2 Slipcover Dimensions: 140.5 (w) x 23(d) x 175 (h) mm
SCF3 Slipcover Dimensions: 140.5 (w) x 18.5 (d) x 176 (h) mm
SCF4 Slipcover Dimensions: 140.5 (w) x 26 (d) x 177 (h) mm
SCF5 Slipcover Dimensions: 138 (w) x 17 (d) x 191.5 (h) mm
SC6 Slipcover Dimensions: 136 (w) x 30.5 (d) x173 (h) mm

is there any other size i'm not aware of ?

SC2 Slipcover Dimensions: 136 (w) x 16 (d) x 171.5 (h) mm (side loader)
SC3 Slipcover Dimensions: 136 (w) x 17 (d) x 173 (h) mm (side loader)
SCF7 Slipcover Dimensions: 141.5 (w) x 57 (d) x 185 (h) mm (For Film Arena Hard Box)*
SCF8 Slipcover Dimensions: 139 (w) x 30.5 (d) x 177 (h) mm (For HDzeta)*
*designed for, but may not fit all (since HDzeta & FA Hardboxes can vary in size)

[PoLskA]

anyone by chance have an extra SCF8 that i can buy?

i have BvS double lenti from hdzeta and i didnt want to buy a pack of 10 as i do not usually buy double lentis... but it was still available from their website...