Steelbook Protective Sleeves Master Thread - Page 118 - Blu-ray Forum

Strife88x · 11-27-2018, 06:28 PM

Quote:

Originally Posted by Mokum

Have you noticed they changed SCF2 too? Any idea why? Something they couldn't fit in the older ones maybe?

They probably received quite a few complaints from customers about the fit. All companies make their full slips differently and over time they may change their dimensions. It's only a matter of time before companies such as Steelbook Central have to adapt to meet the new demand.

Mokum · 11-28-2018, 09:15 AM

BTW anyone got an idea which SCF would fit Blufans Kung Fu Panda 2 movies pack and Transformers tri-pack?

Steelheadz · 11-28-2018, 12:39 PM

I will eventually have to buy some of these for my regular steelbooks. Not sure which size to get. I have some steelbooks that will not have their J cards but I have some that I leave sealed so most likely I will need 2 different sizes.

Waiting for a sale since i think it's about 50 cents for a cover.

I currently use the plastic one and it's a pain everytime I open it , it rips the plastic.

Mokum · 11-28-2018, 04:53 PM

Normal steelbooks fit into the SCF1. Larger ones (for example Tron, the original one I mean) fit into SCF3.

SkyTech6 · 11-30-2018, 11:04 PM

https://www.ebay.com/itm/25x-BLU-RAY...E/153002786383

Anyone use these Moon Circus covers before?

Mokum · 12-12-2018, 05:23 AM

I've got kind of an issue with Blufans full slips: SCF4 are too large while SCF2 aren't high enough. I've seen SCF2's new size is 1 mm higher which would be just perfect but they modified width so I'm a bit concerned whether they will fit or not. Any thoughts?

dloiphone · 12-13-2018, 01:17 AM

Quote:

Originally Posted by SkyTech6

https://www.ebay.com/itm/25x-BLU-RAY...E/153002786383

Anyone use these Moon Circus covers before?

Not using those specifically, but just received these yesterday. Wish I saw the ones you posted since they have the protective film.

https://www.ebay.com/itm/25-Steelboo...72.m2749.l2649

They fit all of my Best Buy 4K steelbooks with jcards.

PriorMarcus · 12-19-2018, 11:49 PM

Not a steelbook but does anyone know which Steelbook Central sleeve would best fit the recent MCU collectable packages? The ones themed after the Tesseract, Orb and Eye.

SkyTech6 · 12-30-2018, 07:43 PM

Quote:

Originally Posted by SkyTech6

https://www.ebay.com/itm/25x-BLU-RAY...E/153002786383

Anyone use these Moon Circus covers before?

I did end up giving this company a try, ordered a 50 pack of the no-j-card standard size.

They arrived quickly. It's a little hard to get the sleeve to remember the correct shape of the flaps that close it together (they kinda wanna be wavy or not closed quite all the way), but I fixed that by just putting them on the shelves upside down for a day, good memory now.

They fit super snug with no wiggle room, so I'm pretty happy with that. And once you remove the protective film they are crystal clear which I'm pretty happy about.

Steelheadz · 12-31-2018, 03:19 PM

Quote:

Originally Posted by SkyTech6

I did end up giving this company a try, ordered a 50 pack of the no-j-card standard size.

They arrived quickly. It's a little hard to get the sleeve to remember the correct shape of the flaps that close it together (they kinda wanna be wavy or not closed quite all the way), but I fixed that by just putting them on the shelves upside down for a day, good memory now.

They fit super snug with no wiggle room, so I'm pretty happy with that. And once you remove the protective film they are crystal clear which I'm pretty happy about.

So these fit any standard steelbook with no j cards?

I would need like 300 of these.

To get 100 from steelbook central SCF1, it's about $85

SkyTech6 · 01-03-2019, 06:34 PM

Quote:

Originally Posted by Steelheadz

So these fit any standard steelbook with no j cards?

I would need like 300 of these.

To get 100 from steelbook central SCF1, it's about $85

Well, standard might be different based on Region idk haha. But yea, standard US best buy/target/walmart/etc... steelbook with no j-card is a snug-bug. lol

And yea the huge price difference in getting them is what got me to order them.

Steelheadz · 01-05-2019, 12:57 AM

Quote:

Originally Posted by SkyTech6

I did end up giving this company a try, ordered a 50 pack of the no-j-card standard size.

They arrived quickly. It's a little hard to get the sleeve to remember the correct shape of the flaps that close it together (they kinda wanna be wavy or not closed quite all the way), but I fixed that by just putting them on the shelves upside down for a day, good memory now.

They fit super snug with no wiggle room, so I'm pretty happy with that. And once you remove the protective film they are crystal clear which I'm pretty happy about.

Bought some of the same one and man they are tough to put on. Rigid and all. Took me about 10 minutes fighting with the first one and the flap still wanted to open. Is there an easier way to do this? i was hoping it would be a fast one. I have a lot of steelbooks and that might take a while

Steelheadz · 01-07-2019, 02:08 AM

Finally figured it out and got the first 50 steelbooks done in about 1 hour. Realized that I might need about 200 of these since some of my steelbooks are still sealed.

C.C. 95 · 01-07-2019, 04:53 PM

Quote:

Originally Posted by Steelheadz

Finally figured it out and got the first 50 steelbooks done in about 1 hour. Realized that I might need about 200 of these since some of my steelbooks are still sealed.

https://m.youtube.com/watch?v=BPWJhtM-lms

Steelheadz · 01-10-2019, 05:01 PM

Quote:

Originally Posted by C.C. 95

https://m.youtube.com/watch?v=BPWJhtM-lms

That helped a lot , I spent about 3 hours and did 100 steelbooks. they look so much better than in the plastic bag sleeve that i was using. Another 100 to go

I got he one without the J card. Plus I have about 35 steelbooks that are still sealed so i won't be putting these in any cases.

SkyTech6 · 01-18-2019, 08:58 PM

Omg that folding method was so much smarter. I was opening the case and then folding the flaps into the box haha.

To fix them not staying closed I put the cases upside down on my shelf for a few days and let the memory set in on each end.

---

Side note; sealed blu-rays with slip fit into these super snug. I put my Deadpool Re-Release Slips into these.

Steelheadz · 01-18-2019, 10:01 PM

Quote:

Originally Posted by SkyTech6

To fix them not staying closed I put the cases upside down on my shelf for a few days and let the memory set in on each end.

---

I did the same thing, I left them upside down for 1 week and just put them straight up today, perfect fit.

C.C. 95 · 01-19-2019, 09:53 AM

Quote:

Originally Posted by SkyTech6

Omg that folding method was so much smarter. I was opening the case and then folding the flaps into the box haha.

To fix them not staying closed I put the cases upside down on my shelf for a few days and let the memory set in on each end.

---

Side note; sealed blu-rays with slip fit into these super snug. I put my Deadpool Re-Release Slips into these.

Once you get the method down, and get into a rhythm - you can do it very fast.

StarkRomanoff · 01-26-2019, 09:55 PM

Hey guys, I'm planning on opening some of my blufans and other premiums (blasphemous, I know!) and am looking for the right size of bag that fits the lentis and FS on the fatter side. I think BF Civil War lentis are the fattest I have and I need to open one to fix a loose disc. Is the SW3 big enough? On steelbook central the description says it fits "standard size" fullslips.

Also, are there any bags that fit these sizes AND smoosh back into one click boxes?

agentalbert · 03-03-2019, 12:25 AM

Has anyone used these for steelbooks and do they fit okay? I've only got about 10 and don't buy many. I do have some other digigbooks I'd also protect, and they all sit on shelves. Just wondering if these will fit over a US steelbook of standard size fine.

https://www.bagsunlimited.com/produc...d-case-sleeves

01-18-2019, 08:58 PM	#2356
SkyTech6 Active Member Top contributor Member since:Mar 2018 4K collection:31 Blu-ray collection:353 DVD collection:2 Trading Score:12	Omg that folding method was so much smarter. I was opening the case and then folding the flaps into the box haha. To fix them not staying closed I put the cases upside down on my shelf for a few days and let the memory set in on each end. --- Side note; sealed blu-rays with slip fit into these super snug. I put my Deadpool Re-Release Slips into these. Last edited by SkyTech6; 01-18-2019 at 09:04 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
The Thing (Universal release) - 9/30/2008 & The Thing Prequel	Blu-ray Movies - North America	mr.hidef	1757	06-12-2023 05:11 AM
What is a SteelBook and purchasing Resource thread for Blu-ray SteelBook	Blu-ray SteelBooks	jw	238	03-04-2014 08:10 AM
Transformers BD Master Thread	Blu-ray Movies - North America	Poonking	16	07-12-2008 06:23 PM

11-28-2018, 09:15 AM	#2342
Mokum Member Member since:Nov 2017 Blu-ray collection:1 Trading Score:1	BTW anyone got an idea which SCF would fit Blufans Kung Fu Panda 2 movies pack and Transformers tri-pack?

11-28-2018, 12:39 PM	#2343
Steelheadz Power Member Member since:May 2018	I will eventually have to buy some of these for my regular steelbooks. Not sure which size to get. I have some steelbooks that will not have their J cards but I have some that I leave sealed so most likely I will need 2 different sizes. Waiting for a sale since i think it's about 50 cents for a cover. I currently use the plastic one and it's a pain everytime I open it , it rips the plastic.

11-28-2018, 04:53 PM	#2344
Mokum Member Member since:Nov 2017 Blu-ray collection:1 Trading Score:1	Normal steelbooks fit into the SCF1. Larger ones (for example Tron, the original one I mean) fit into SCF3.

11-30-2018, 11:04 PM	#2345
SkyTech6 Active Member Top contributor Member since:Mar 2018 4K collection:31 Blu-ray collection:353 DVD collection:2 Trading Score:12	https://www.ebay.com/itm/25x-BLU-RAY...E/153002786383 Anyone use these Moon Circus covers before?

12-12-2018, 05:23 AM	#2346
Mokum Member Member since:Nov 2017 Blu-ray collection:1 Trading Score:1	I've got kind of an issue with Blufans full slips: SCF4 are too large while SCF2 aren't high enough. I've seen SCF2's new size is 1 mm higher which would be just perfect but they modified width so I'm a bit concerned whether they will fit or not. Any thoughts?

12-19-2018, 11:49 PM	#2348
PriorMarcus Active Member Member since:Jan 2012 Trading Score:1	Not a steelbook but does anyone know which Steelbook Central sleeve would best fit the recent MCU collectable packages? The ones themed after the Tesseract, Orb and Eye.

01-07-2019, 02:08 AM	#2353
Steelheadz Power Member Member since:May 2018	Finally figured it out and got the first 50 steelbooks done in about 1 hour. Realized that I might need about 200 of these since some of my steelbooks are still sealed.

01-26-2019, 09:55 PM	#2359
StarkRomanoff Blu-ray Guru Member since:Jul 2015 Location:SoCal 4K collection:128 Blu-ray collection:491 DVD collection:76 Digital collection:1 iTunes collection:6 Trading Score:17	Hey guys, I'm planning on opening some of my blufans and other premiums (blasphemous, I know!) and am looking for the right size of bag that fits the lentis and FS on the fatter side. I think BF Civil War lentis are the fattest I have and I need to open one to fix a loose disc. Is the SW3 big enough? On steelbook central the description says it fits "standard size" fullslips. Also, are there any bags that fit these sizes AND smoosh back into one click boxes?

03-03-2019, 12:25 AM	#2360
agentalbert Power Member Top contributor Member since:Jul 2009 Location:San Antonio, TX 4K collection:158 Blu-ray collection:2260 DVD collection:412 Digital collection:402 Blu-ray reviews:2 Trading Score:90	Has anyone used these for steelbooks and do they fit okay? I've only got about 10 and don't buy many. I do have some other digigbooks I'd also protect, and they all sit on shelves. Just wondering if these will fit over a US steelbook of standard size fine. https://www.bagsunlimited.com/produc...d-case-sleeves

Best SteelBook Deals