Steelbook Protective Sleeves Master Thread

[C.C. 95]

Originally Posted by jeffster15

Question will the SCF4 fit the HDzeta Terminator and Terminator Genisys? Because they are thicker than the UE Guardians Of The Galaxy & UE Big Hero 6.

My HDzeta Terminator Fullslip fits in the SCF4 fine.

[jeffster15]

Originally Posted by C.C. 95

My HDzeta Terminator Fullslip fits in the SCF4 fine.

Thanks, so it doesn't bow at all? Also is yours opened or sealed? Thanks.

[Jhadur]

Lentis on the outside opened in SCF4s. A fullslip in middle in a SCF2. you can see the gaps between them caused by the SCF4s bowing out a fair bit.

[C.C. 95]

Originally Posted by jeffster15

Thanks, so it doesn't bow at all? Also is yours opened or sealed? Thanks.

Mine is sealed. Yes there is a small bowing in the back. But nothing that is a big deal. You can push it down with your hand - which means, it sits normal in your collection. And mine only slightly bows on the back and not the front. (It does it on the "tuck" side with the flaps.)
http://i63.tinypic.com/ji1fnb.jpg

[jeffster15]

Originally Posted by C.C. 95

Mine is sealed. Yes there is a small bowing in the back. But nothing that is a big deal. You can push it down with your hand - which means, it sits normal in your collection. And mine only slightly bows on the back and not the front. (It does it on the "tuck" side with the flaps.)
http://i63.tinypic.com/ji1fnb.jpg

Ya that doesn't look too bad, ya it's a tight squeeze. It will at least work until they come out with the SCF5 haha.

[C.C. 95]

Originally Posted by jeffster15

Ya that doesn't look too bad, ya it's a tight squeeze. It will at least work until they come out with the SCF5 haha.

I guess you could "technically" call it a tight squeeze, but it really isn't. Once you open the flap, it slides right out.

[maximus14]

Here's looking at you steelbook central

Please make a SCF5 for the new HDzeta's Lenti's!! Oh and while your at it something for PlainArchives as you can see from pics below the SCF3 is just not high enough for it

[liljoey90]

For all you guys that have the SCF! fully enclosed.. Do you guys put US steelbooks in there? Or any steenbok that doesn't have that thick cardboard J card? I'm debating if I should put those kind of steelbooks in there... It fits looser than the Zavvi Disney ones, and the bottom of the Toploader has a little space if that makes any sense. What do you guys think?

[maximus14]

For steels with j-cards I use SCF3 which work better with the thicker card, SCF1s can be used with the paper thin cards

[itsmyname]

Can anyone point me in the right direction for polybags that would fit my Kimchi full slips as well as my UK Raid play.com steel book WITH the j-card? The j card is as the bottom and quite thick

[yellowfirst]

Questions for those who bought from Steelbook Central,

Which slipcovers match the steelbook from the following retailers

Kimchidvd
FilmArena
Blufans
Zavvi
Novamedia
Plain Archive

Thank you!

[maximus14]

Originally Posted by yellowfirst

Questions for those who bought from Steelbook Central,

Which slipcovers match the steelbook from the following retailers

Kimchidvd
FilmArena
Blufans
Zavvi
Novamedia
Plain Archive

Thank you!

Well.......

Kimchidvd fullslips SCF2 - lentis SCF3
Filmarena SCF2
Blufans SCF2 for OABs and single sided Lentis- double sided lentis SCF4
Zavvi SCF1 or if you prefer 3 sided SC2s
Novamedia fullslips SCF2 and lentis SCF3

Plain Archive.......I would say SCF3 but as you can see from my pic of "The Master" above it is too high for them and a SCF2 would be too much space inside. I'm still waiting for anyone to get back to me on what people use for this that fits nicely

Sometimes fullslips have varied thickness or height but it would be either SCF2 or SCF4.

[yellowfirst]

Originally Posted by maximus14

Well.......

Kimchidvd fullslips SCF2 - lentis SCF3
Filmarena SCF2
Blufans SCF2 for OABs and single sided Lentis- double sided lentis SCF4
Zavvi SCF1 or if you prefer 3 sided SC2s
Novamedia fullslips SCF2 and lentis SCF3

Plain Archive.......I would say SCF3 but as you can see from my pic of "The Master" above it is too high for them and a SCF2 would be too much space inside. I'm still waiting for anyone to get back to me on what people use for this that fits nicely

Sometimes fullslips have varied thickness or height but it would be either SCF2 or SCF4.

Got it. Basically, I need SCF1 through SCF4 then. It looks like the price is cost less on their website compare to the Ebay ones excluding shipping. Shipping cost on Ebay is GBP 6.00 which is close to $9.00 as they don't list the shipping cost on their website. I appreciate if anyone can confirm the shipping cost when ordering directly from their site.

[C.C. 95]

Originally Posted by maximus14

Well.......

Kimchidvd fullslips SCF2 - lentis SCF3
Filmarena SCF2
Blufans SCF2 for OABs and single sided Lentis- double sided lentis SCF4
Zavvi SCF1 or if you prefer 3 sided SC2s
Novamedia fullslips SCF2 and lentis SCF3

Plain Archive.......I would say SCF3 but as you can see from my pic of "The Master" above it is too high for them and a SCF2 would be too much space inside. I'm still waiting for anyone to get back to me on what people use for this that fits nicely

Sometimes fullslips have varied thickness or height but it would be either SCF2 or SCF4.

Here is an infogram I made for this specific purpose.
Maybe this will help you:

[rsaotome]

Just curious as to what others are using for any of these titles from KimchiDVD

Hitman Agent 47, Black Hawk Down, Fury, Spectre: 007, Fantastic Four, The Walk

They're all skinny fullslip's that don't fit in the SCF3's, but if you place them in the SCF2 cases, they'll fit just fine, just a ton of leftover room.

It seems Kimchi's "The Revenant" is also going to use the same skinny fullslip style, thou I could be wrong.

[Necron102]

So I have tried the US full enclosed ones and the SC2 cases from the UK. I don't really like either. Has anyone seen for purchase just the plastic slipcovers similar to what the Mondo releases came with that have the top and bottom open?

[emmet otter]

What would be good cases for the Ranma 1/2 Limited Edition blurays?

What are the dimensions for those SCF1, SCF2, 3 and so on...?

[The Drugstore]

First time posting in this section and need help. I need full closure protection on my John Wick NovaMedia steelbooks. They are sealed and I intend on keeping them sealed. I want to protect them while on display. I have the novamedia version's that are numbered out of 1800 and the steelbook is housed in a cardboard case. If someone can reply with a link to the correct size I would greatly appreciate it. Again I want full protection for these steelbooks.

Looks like I need SCF2's? Does anybody carry these in the Untied States? Or is my only option to order from overseas?

[C.C. 95]

Originally Posted by The Drugstore

First time posting in this section and need help. I need full closure protection on my John Wick NovaMedia steelbooks. They are sealed and I intend on keeping them sealed. I want to protect them while on display. I have the novamedia version's that are numbered out of 1800 and the steelbook is housed in a cardboard case. If someone can reply with a link to the correct size I would greatly appreciate it. Again I want full protection for these steelbooks.

Looks like I need SCF2's? Does anybody carry these in the Untied States? Or is my only option to order from overseas?

The only place to buy the Steelbook Central cases is on their website or eBay store. (The website is cheaper). It is not cheap, but there is not supplier in the U.S. (That I am aware of). (It is also worth it to buy in bulk, as you get more savings that way).
The Nova John Wicks are: 1/4th slip (SCF1), Lenti (SCF3) Fullslip (SCF2)

[SpiderRock88]

This may be the most repetitive question ever but don't feel like digging through all the pages lol

Which are the best ones, generally?
Best price, including shipping?
Are there any that would fit the jumbo steelies like the walking dead ones?


Sent from my iPhone using Tapatalk