Getting ready to use DVE Bluray cal disc? about DLp/Palsma and Bluray settings? - Blu-ray Forum

JOE.G · 02-02-2009, 02:39 PM

Before I use the DVE bluray calabration disc where do i want these settings?

In the DLP HLT6176S what should i have these set to
Contrast high,med,low?
Black level high,med,low?
Color Mode: sRGB or normal?
Edge enhancment?

DMP 55 blu ray hooked to above tv
black level darker or lighter?
Film mode auto ?
Picture normal? fine? cinema?

Also have a PN50A650 Plasma with a 10 ak bluray hooked to it same ? apply to this set up also. Thanks

skinnhc · 02-02-2009, 07:28 PM

Do not know your specific models but this I can tell you:
When Calibrating you need to turn OFF any "features" that the TV uses to "help" the viewing experience..e.g. Black level, Dynamic Contrast, Edge Enhancement etc etc.. do use srgb..it will give you the better colors...and do use Movie mode...hope it helps

bhampton · 02-02-2009, 09:06 PM

Maybe I'm mis-reading your post...

You don't try and set those things because you're about to use DVE.... You instead use DVE to set those things.

Anyway... I suggest watching though the tutorials on DVE as they explain how and why you should use it.

Good Luck,

Brian

bhampton · 02-02-2009, 09:10 PM

Film mode Auto sounds right.

Edge Enhancement Off if that's an option. Sometimes Sharpness to 0 or mid-point is the same thing as no edge enhancement.

Black Level --- that's a highly debated one. If you calibrate you should get the same results with either setting... The darker is for displays that can use blacker than black to set the black level... you may want to explore that.

Contrast and Black level of the display device will be adjusted with test patterns from the disc... hopefully it's not a matter of High, Med, Low.. that doesn't sound too good ... should be more like 0 to 100 for both settings.

JOE.G · 02-03-2009, 06:38 AM

it does have 0 100 for contrast, but there also is another contrast in detailed settings that has low med high. What about warm cool normal?

bhampton · 02-03-2009, 02:03 PM

Joe,

What's a DLP HLT6176S???

I can look up recommended setting to start with on tweaktv.com but ... I actually don't know what that is. I assume it's a flat screen DLP HDTV but it doesn't seem to be from Hitachi so... what is it?

I also don't understand this...

"Also have a PN50A650 Plasma with a 10 ak bluray"

Seems you have another HDTV... You will have to do them one by one.

-Brian

02-02-2009, 02:39 PM	#1
JOE.G Member Member since:Dec 2008 Location:NY	Getting ready to use DVE Bluray cal disc? about DLp/Palsma and Bluray settings? Before I use the DVE bluray calabration disc where do i want these settings? In the DLP HLT6176S what should i have these set to Contrast high,med,low? Black level high,med,low? Color Mode: sRGB or normal? Edge enhancment? DMP 55 blu ray hooked to above tv black level darker or lighter? Film mode auto ? Picture normal? fine? cinema? Also have a PN50A650 Plasma with a 10 ak bluray hooked to it same ? apply to this set up also. Thanks

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
120hz Samsung ln46b650 with bluray 1500bd highest possible settings	Home Theater General Discussion	ezdraft	2	04-18-2009 04:15 AM
CNET: "Microsoft has Xbox360 Bluray Drives Ready to Go"	Blu-ray PCs, Laptops, Drives, Media and Software	Sussudio	168	10-12-2008 03:19 PM

02-02-2009, 07:28 PM	#2
skinnhc Junior Member Member since:Feb 2009 Blu-ray collection:134 Digital collection:145	Do not know your specific models but this I can tell you: When Calibrating you need to turn OFF any "features" that the TV uses to "help" the viewing experience..e.g. Black level, Dynamic Contrast, Edge Enhancement etc etc.. do use srgb..it will give you the better colors...and do use Movie mode...hope it helps

02-02-2009, 09:06 PM	#3
bhampton Blu-ray Count Member since:Aug 2007 4K collection:981 Blu-ray collection:2537 DVD collection:67 Blu-ray reviews: 6 Trading Score:18	Maybe I'm mis-reading your post... You don't try and set those things because you're about to use DVE.... You instead use DVE to set those things. Anyway... I suggest watching though the tutorials on DVE as they explain how and why you should use it. Good Luck, Brian

02-02-2009, 09:10 PM	#4
bhampton Blu-ray Count Member since:Aug 2007 4K collection:981 Blu-ray collection:2537 DVD collection:67 Blu-ray reviews: 6 Trading Score:18	Film mode Auto sounds right. Edge Enhancement Off if that's an option. Sometimes Sharpness to 0 or mid-point is the same thing as no edge enhancement. Black Level --- that's a highly debated one. If you calibrate you should get the same results with either setting... The darker is for displays that can use blacker than black to set the black level... you may want to explore that. Contrast and Black level of the display device will be adjusted with test patterns from the disc... hopefully it's not a matter of High, Med, Low.. that doesn't sound too good ... should be more like 0 to 100 for both settings.

02-03-2009, 06:38 AM	#5
JOE.G Member Member since:Dec 2008 Location:NY	it does have 0 100 for contrast, but there also is another contrast in detailed settings that has low med high. What about warm cool normal?

02-03-2009, 02:03 PM	#6
bhampton Blu-ray Count Member since:Aug 2007 4K collection:981 Blu-ray collection:2537 DVD collection:67 Blu-ray reviews: 6 Trading Score:18	Joe, What's a DLP HLT6176S??? I can look up recommended setting to start with on tweaktv.com but ... I actually don't know what that is. I assume it's a flat screen DLP HDTV but it doesn't seem to be from Hitachi so... what is it? I also don't understand this... "Also have a PN50A650 Plasma with a 10 ak bluray" Seems you have another HDTV... You will have to do them one by one. -Brian

Best Blu-ray Movie Deals