Panasonic DMP-BD60 - Blu-ray Forum

DAAKNESS · 04-07-2009, 06:11 PM

Does anyone have this unit hooked up to the Onkyo TX-SR806? I just read a review on crutchfield.com and it said that with the newest firmware upgrade that he did not get any video if he ran it through the receiver. You would have to run it to the tv to get any video at all.

un4gvn94538 · 04-12-2009, 04:27 AM

well having ordered this player before seeing your post i did some digging. there were only 3 reviews on amazon as of right now and one person is using a onk 805.

Quote:

I upgraded the player to 1.5 version of firmware using the Ethernet port and I had absolutely no problems after upgrading the firmware. I am using the Panasonic Blu Ray player with the Onkyo 805 receiver and a 1080p overhead Mitsubishi LCD projector

though he doesnt mention his connections exactly, i think its safe to assume hes using hdmi and video going through the receiver considering the equipment involved. he doesnt list any issues either so i dont think ill have any issues. the one thing that does concern me though has even less info out there. i found this on the avs forums official bd60/80 thread:

Quote:

Quote:
Originally Posted by Tony Costanza
Will the BD80 play all channels of 7.1 PCM - feeding to an Integra DTC-9.8. The Integra will only play 5.1 on 7.1 PCM with input from BD55. This was not true with the BD30.
It was determined that the Integra was at fault. Possible Panasonic overcame the problem. 3:10 to Yuma is a BR that only plays 5 of the 7 channels. (end quote)

Panasonic told me there was nothing they could do to fix this issue, but they said that the Onkyo engineers had reproduced the problem and were going to contact me about how they would deliver the fix. That was 5 months ago. Still no word from Onkyo.

I didn't test this but I expect the behavior on 7.1-ch PCM titles from the BD60 and BD80 will be identical to the way it was on the BD35 and BD55 - works fine on everything *except* on the xx5 series Onkyo receivers (and their Integra counterparts) which omit the rear channels.

-CB

i dont remember 3:10 to yuma having an issue with my ps3 so im not sure why the receiver would be at fault. both players would send 7.1 pcm audio from the movie as 7.1 pcm. if there is an issue i would think it would be the player. with the snail free delivery of amazon i would expect the player on the 22nd or soon after. i doubt ill have any issues but i can always send it back if i do.

DAAKNESS · 04-12-2009, 08:14 PM

I received this unit on Friday from Vanns.com. So far it has perfomed flawlessly. It is on sale at Vanns.com for $279.99 and that includes shipping. I was a little worried on how it would play standard dvd's and so far it has been outstanding. However there really isn't a noticeable differnce between the 24 and the 60fps settings when playing standard dvd's. So far I have watched Terminator 2 and Why did I get married.(both standard dvd) and Punisher: War Zone in blu ray. Sound is much richer than my PS3 since you can bitstream the hi def audio codecs. My system is as follows: Sony KDS50A3000, Onkyo TX SR806, Sony PS3, Panasonc DMP-BD60K, Klipsch VR35 front speakers, Klipsch Synergy series center and surround speakers, Polk R150 surround back speakers, Marantz CC4001 cd changer, Velodyne DLS3750 sub, and a Monster 1000mkII surge protector. One question that I do have is where is the 1.5 firmware upgrade for the DMP-BD60K? It is not on the Panasonic website and according to their customer service they do not know of any firmware upgrade for this unit. Can someone help?

Colglizity · 04-12-2009, 08:20 PM

I'm very close to buying this player, as soon as I can sell my PS3.

un4gvn94538 · 04-12-2009, 08:45 PM

Quote:

Originally Posted by DAAKNESS

I received this unit on Friday from Vanns.com. So far it has perfomed flawlessly. It is on sale at Vanns.com for $279.99 and that includes shipping. I was a little worried on how it would play standard dvd's and so far it has been outstanding. However there really isn't a noticeable differnce between the 24 and the 60fps settings when playing standard dvd's. So far I have watched Terminator 2 and Why did I get married.(both standard dvd) and Punisher: War Zone in blu ray. Sound is much richer than my PS3 since you can bitstream the hi def audio codecs. My system is as follows: Sony KDS50A3000, Onkyo TX SR806, Sony PS3, Panasonc DMP-BD60K, Klipsch VR35 front speakers, Klipsch Synergy series center and surround speakers, Polk R150 surround back speakers, Marantz CC4001 cd changer, Velodyne DLS3750 sub, and a Monster 1000mkII surge protector. One question that I do have is where is the 1.5 firmware upgrade for the DMP-BD60K? It is not on the Panasonic website and according to their customer service they do not know of any firmware upgrade for this unit. Can someone help?

i dunno. try checking the avs forums. they had a list for onk firmware updates they may have one for the panny players. im looking forward to getting mine. so your not worried anymore? have you tried 3:10 to yuma? also, i would think if the player was hooked up via ethernet, it would automatically update the player when needed? or maybe select update? or perhaps they took it off to fix any issues.

Colglizity · 04-13-2009, 02:45 AM

Nevermind..... I couldn't wait.... I went ahead and bought one!!!! I can't wait to have a standalone player! Anyone wanna buy a barely used 40GB PS3????

un4gvn94538 · 04-13-2009, 03:44 PM

ordered on friday. then, it showed an estimated delivery of the 22nd or later. now its showing shipped today delivery tomorrow

and on free shipping too

un4gvn94538 · 04-13-2009, 04:30 PM

ill take the link out then since its not for the u.s. model

DAAKNESS · 04-13-2009, 07:22 PM

I called Panasonic this morning about the firmware upgrade for this unit. They said that the firmware upgrade on the global website is NOT for the US models. Now I know why when I tried to burn it myself off of the global website it did not work.

ShyBoy · 04-13-2009, 09:58 PM

I have the BD55 unit and used this website to check for firmware upgrades.

http://panasonic.jp/support/global/cs/bd/index.html

In it, it does list a firmware upgrade for the BD60 unit and it is version 1.5. It was released back on March 25th with a description for "BD-V Playability".

It also listed the upgrade as for North America regions as well.

ryoohki · 04-13-2009, 11:06 PM

Quote:

Originally Posted by DAAKNESS

I called Panasonic this morning about the firmware upgrade for this unit. They said that the firmware upgrade on the global website is NOT for the US models. Now I know why when I tried to burn it myself off of the global website it did not work.

95% of the time you know more about the product you bought than the CSR you call...

DAAKNESS · 04-14-2009, 02:10 PM

Quote:

Originally Posted by ryoohki

95% of the time you know more about the product you bought than the CSR you call...

I agree but in this case I think the CSR is correct. I have the DMP BD35 and every time I did a firmware upgrade with that unit it was on the US website as well as the global website. If you go to the US website now I GUARANTEE YOU THAT THE FIRMWARE UPGRADE IS NOT THERE! Like I said before anyone that purchases this unit in this country should not have any issues with it being 1.1 instead of 1.5.

un4gvn94538 · 04-14-2009, 03:03 PM

should be getting mine today. amazon just refunded me about 10 bucks for the cheaper price they have now rather the 265 i paid on friday.

for a total of 255 with free shipping

krisjan · 04-14-2009, 03:18 PM

Quote:

Originally Posted by DAAKNESS

I agree but in this case I think the CSR is correct. I have the DMP BD35 and every time I did a firmware upgrade with that unit it was on the US website as well as the global website. If you go to the US website now I GUARANTEE YOU THAT THE FIRMWARE UPGRADE IS NOT THERE! Like I said before anyone that purchases this unit in this country should not have any issues with it being 1.1 instead of 1.5.

The Panny US web site is ALWAYS behind the .jp site. I have ALWAYS done my FW updates for my BD30 from the .jp site and they have ALWAYS worked fine. I don't bother to wait until the Panny US engineers get around to posting the update on the US site. You can wait if you want to but its not necessary.

un4gvn94538 · 04-15-2009, 08:13 PM

any one watch youtube vids? with my setup the video is normally 4:3 when its playing but when i click on it to enlarge it, it becomes distorted. cant find any tweaks on the player, tv modes wont work (hdmi), and nothing on the receiver will affect it. in the network settings on the player, there is a setting to make the entire image smaller but it doesnt affect the video.

un4gvn94538 · 04-16-2009, 12:07 AM

id thought id let people know that there is a confirmed issue with onkyo receivers (and integra apparently) and this player when it comes to 24p capability. with this setting on, it interferes with 7.1 audio playback from 7.1 pcm discs only. with the setting off, the audio is fine. its being looked into.

on a side note: the player checked for the firmware and found the update. worked fine.

04-07-2009, 06:11 PM	#1
DAAKNESS Member Member since:May 2008	Panasonic DMP-BD60 Does anyone have this unit hooked up to the Onkyo TX-SR806? I just read a review on crutchfield.com and it said that with the newest firmware upgrade that he did not get any video if he ran it through the receiver. You would have to run it to the tv to get any video at all.

04-12-2009, 08:14 PM	#3
DAAKNESS Member Member since:May 2008	Dmp-bd60k I received this unit on Friday from Vanns.com. So far it has perfomed flawlessly. It is on sale at Vanns.com for $279.99 and that includes shipping. I was a little worried on how it would play standard dvd's and so far it has been outstanding. However there really isn't a noticeable differnce between the 24 and the 60fps settings when playing standard dvd's. So far I have watched Terminator 2 and Why did I get married.(both standard dvd) and Punisher: War Zone in blu ray. Sound is much richer than my PS3 since you can bitstream the hi def audio codecs. My system is as follows: Sony KDS50A3000, Onkyo TX SR806, Sony PS3, Panasonc DMP-BD60K, Klipsch VR35 front speakers, Klipsch Synergy series center and surround speakers, Polk R150 surround back speakers, Marantz CC4001 cd changer, Velodyne DLS3750 sub, and a Monster 1000mkII surge protector. One question that I do have is where is the 1.5 firmware upgrade for the DMP-BD60K? It is not on the Panasonic website and according to their customer service they do not know of any firmware upgrade for this unit. Can someone help?

04-13-2009, 04:30 PM	#8
un4gvn94538 Blu-ray Knight Top contributor Member since:Dec 2007 Location:Limbo (Bakersfield, Ca.) 4K collection:143 Blu-ray collection:811 DVD collection:54 Digital collection:1494 Trading Score:277	ill take the link out then since its not for the u.s. model Last edited by un4gvn94538; 04-13-2009 at 08:19 PM.

04-13-2009, 07:22 PM	#9
DAAKNESS Member Member since:May 2008	Panasonic DMP-60K firmware upgrade I called Panasonic this morning about the firmware upgrade for this unit. They said that the firmware upgrade on the global website is NOT for the US models. Now I know why when I tried to burn it myself off of the global website it did not work.

04-13-2009, 09:58 PM	#10
ShyBoy Member Member since:Dec 2008 Location:Las Vegas, NV	DMP-BD60 Firmware Upgrade I have the BD55 unit and used this website to check for firmware upgrades. http://panasonic.jp/support/global/cs/bd/index.html In it, it does list a firmware upgrade for the BD60 unit and it is version 1.5. It was released back on March 25th with a description for "BD-V Playability". It also listed the upgrade as for North America regions as well. Last edited by ShyBoy; 04-13-2009 at 10:43 PM.

04-12-2009, 08:20 PM	#4
Colglizity Senior Member Top contributor Member since:Feb 2008 Location:Washington (360) Home Theater Gallery:40 Blu-ray collection:31 Blu-ray reviews:3	I'm very close to buying this player, as soon as I can sell my PS3.

04-13-2009, 02:45 AM	#6
Colglizity Senior Member Top contributor Member since:Feb 2008 Location:Washington (360) Home Theater Gallery:40 Blu-ray collection:31 Blu-ray reviews:3	Nevermind..... I couldn't wait.... I went ahead and bought one!!!! I can't wait to have a standalone player! Anyone wanna buy a barely used 40GB PS3????

04-13-2009, 03:44 PM	#7
un4gvn94538 Blu-ray Knight Top contributor Member since:Dec 2007 Location:Limbo (Bakersfield, Ca.) 4K collection:143 Blu-ray collection:811 DVD collection:54 Digital collection:1494 Trading Score:277	ordered on friday. then, it showed an estimated delivery of the 22nd or later. now its showing shipped today delivery tomorrow and on free shipping too

04-14-2009, 03:03 PM	#13
un4gvn94538 Blu-ray Knight Top contributor Member since:Dec 2007 Location:Limbo (Bakersfield, Ca.) 4K collection:143 Blu-ray collection:811 DVD collection:54 Digital collection:1494 Trading Score:277	should be getting mine today. amazon just refunded me about 10 bucks for the cheaper price they have now rather the 265 i paid on friday. for a total of 255 with free shipping

04-15-2009, 08:13 PM	#15
un4gvn94538 Blu-ray Knight Top contributor Member since:Dec 2007 Location:Limbo (Bakersfield, Ca.) 4K collection:143 Blu-ray collection:811 DVD collection:54 Digital collection:1494 Trading Score:277	any one watch youtube vids? with my setup the video is normally 4:3 when its playing but when i click on it to enlarge it, it becomes distorted. cant find any tweaks on the player, tv modes wont work (hdmi), and nothing on the receiver will affect it. in the network settings on the player, there is a setting to make the entire image smaller but it doesnt affect the video.

04-16-2009, 12:07 AM	#16
un4gvn94538 Blu-ray Knight Top contributor Member since:Dec 2007 Location:Limbo (Bakersfield, Ca.) 4K collection:143 Blu-ray collection:811 DVD collection:54 Digital collection:1494 Trading Score:277	id thought id let people know that there is a confirmed issue with onkyo receivers (and integra apparently) and this player when it comes to 24p capability. with this setting on, it interferes with 7.1 audio playback from 7.1 pcm discs only. with the setting off, the audio is fine. its being looked into. on a side note: the player checked for the firmware and found the update. worked fine.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Panasonic DMP-BD60, DMP-BD80 and DMP-BD70V	Blu-ray Players and Recorders	Sansho	36	07-08-2009 02:20 PM
Just got the Panasonic DMP-BD60	Blu-ray Players and Recorders	LordCrumb	0	06-28-2009 07:55 AM

Best Blu-ray Movie Deals