LCD SONY TV - AND XBOX 360 ELITE HELp!

[iNEEDHELP]

I got my LCD sony KDL-40v5100 about a month ago. I got my xbox a few weeks ago... My xbox 360 was working perfectly when it was plugged in to the HDMI1 input, today i turned my 360 on. AND THE HDMI screeb says no signal at the bottom left corner. Im pretty sure all the cables are plugged in!

[aramis109]

Assuming it's going straight to the TV and not through a receiver, try turning them on in a different order- turn the TV on second. Try unplugging and replugging the cable while it's on. There may be some handshaking issues. Also try a different port if the TV has one.

*edit* Oh, and as a last resort, try a different cable- borrow one from a friend or something. Maybe the cable is bad.

[ajtalavera]

Or is either you xbox 360 is about to get the 3 rings of death and it might be time to return it for a new one since you just bought it.

[FeltToaster]

Well with my S5100 i happened to get no audio twice and I just turned off my TV and unplugged my 360 for 30 minutes and I got audio. Not sure if my audio problem can fix you overall issue but yeah.

[steve1971]

Originally Posted by FeltToaster

Well with my S5100 i happened to get no audio twice and I just turned off my TV and unplugged my 360 for 30 minutes and I got audio. Not sure if my audio problem can fix you overall issue but yeah.

Contact Sony or go to their website. They have an update to fix the problem. It will also fix the auto dimming problem if you happen to notice it.

[FeltToaster]

You sir are a genius those were the only 2 problems i had with my TV. But when ever i insert my usb it does not read even with proper instructions

[slaizer2000]

Originally Posted by iNEEDHELP

I got my LCD sony KDL-40v5100 about a month ago. I got my xbox a few weeks ago... My xbox 360 was working perfectly when it was plugged in to the HDMI1 input, today i turned my 360 on. AND THE HDMI screeb says no signal at the bottom left corner. Im pretty sure all the cables are plugged in!

Try another hdmi cable and different port on the Tv.
Also possile the 360 reverted back to the component cables. Try plugging those in and see if you get anything. You may need to unplug the hdmi cables while you are doing this.

Just some troubleshooting things you can try. Also if you have a friend who has a tv with hdmi ports try using your 360 on theirs to see if it works or not.