Custom Cover Art Thread - Page 1132 - Blu-ray Forum

AmishParadise · 11-02-2018, 06:41 PM

Updated "Stranger Things" cover art available below. I worked up 4K versions as well. Along the way I dropped the logos from the front portion and a few things from the spine for a cleaner look. Over the weekend I'll work up versions of each with 15mm spines for those that want to go with cases that can hold 4-6 discs.

UPDATE...
I just finished working up versions with 15mm spines as to accommodate cases that can hold 4-6 discs. While I was at it I changed the images used for the top portion of the spines. I'm also calling out the number of discs in the given release on the back portion now. Well, for the 15mm versions. In any event, enjoy!
____________________________

Stranger Things Cover Art (15mm Spines)

Season 2 (4K):

[Show spoiler]

Season 1 (4K):

[Show spoiler]

Season 2 (Blu-ray):

[Show spoiler]

Season 1 (Blu-ray):

[Show spoiler]

____________________________

Stranger Things Cover Art (11mm Spines)

Season 2 (4K):

[Show spoiler]

Season 1 (4K):

[Show spoiler]

Season 2 (Blu-ray):

[Show spoiler]

Season 1 (Blu-ray):

[Show spoiler]

myway · 11-03-2018, 12:55 PM

Quote:

Originally Posted by myway

Great; thanks!

I keep getting the "image failed to upload" message

A Sith Lord? · 11-03-2018, 03:09 PM

Does anyone have the proper dimensions for standard criterion cover?

AmishParadise · 11-03-2018, 04:12 PM

Quote:

Originally Posted by A Sith Lord?

Does anyone have the proper dimensions for standard criterion cover?

The template that I use can be found here. I presume it follows the criterion standard. I'm sure others can confirm.

lsg303 · 11-03-2018, 05:24 PM

Best cover！

Quote:

Originally Posted by PeterTHX

Extinct Edition?

The original DVD set was merely Jurassic Park Trilogy...no reason to mess with traditional simplicity.

Robert George · 11-03-2018, 05:51 PM

Here's few things I've been fooling around with lately...

donidarko · 11-03-2018, 06:23 PM

Anyone doing a Cactus Flower custom cover?

I’d do one but don’t have high res. Poster art.

TripleHBK · 11-03-2018, 07:26 PM

Quote:

Originally Posted by donidarko

Anyone doing a Cactus Flower custom cover?

I’d do one but don’t have high res. Poster art.

Not sure if this is high enough resolution for you or not but...

[Show spoiler]

Monterey Jack · 11-03-2018, 07:33 PM

I hate to be a pest, but...any progress on some Batman: TAS customs for a pair of "thick" 6-disc cases? I would pay for any printing and shipping costs on these.

A Sith Lord? · 11-03-2018, 07:46 PM

Quote:

Originally Posted by AmishParadise

The template that I use can be found here. I presume it follows the criterion standard. I'm sure others can confirm.

Unfortunately it's not proper dimensions for the clear case I believe?

TripleHBK · 11-03-2018, 07:49 PM

Quote:

Originally Posted by A Sith Lord?

Unfortunately it's not proper dimensions for the clear case I believe?

Searching google or the forum will turn up this result. It's been covered plenty of times in the past.

https://forum.blu-ray.com/showpost.p...postcount=9662

Quote:

Originally Posted by jlk155

The correct cover dimensions for a Criterion case are 3240 x 1894 pixels (@ 300 pixels/inch), which converts to 274.32 x 160.36mm.

A Sith Lord? · 11-03-2018, 07:54 PM

Quote:

Originally Posted by TripleHBK

Searching google or the forum will turn up this result. It's been covered plenty of times in the past.

https://forum.blu-ray.com/showpost.p...postcount=9662

Thanks a bunch.

I signed up on that other website anyways just to get the fonts and everything on that template.

Would you happen to have the dimensions for the 17MM spine 3-disc case?

Robert George · 11-04-2018, 03:06 PM

As you wish...

Justanothercrow421 · 11-04-2018, 03:22 PM

Marathon Man

myway · 11-06-2018, 01:43 AM

http://euphoricfx.org/forums/ucp.php...g/efxcoverart/

My custom BD cover for the 1951 version of A Christmas Carol is finally done! Much to my surprise, I was never able to find a single custom cover for this movie, so I hope many people find it useful.

Dynamo of Eternia · 11-06-2018, 01:54 AM

I don't know why, but I seem to have this problem whenever I try to print covers after a long time of not having done so. I'm also using a different printer than in the past.

I keep trying to print up the Batman covers that I'm making and I can't get the size right.

Initially I realized that I did make a major mistake with the measurements.

But even with further experimenting that I've done, I keep getting covers that are either a little too big or a little too small.

For the cover that I'm making for a standard elite size case, I'm using the measurements of 26.86w x 14.92h (in CM), which is what other covers people have made seem to often be when I open them in Photoshop and check the measurements, but when I print at that measurement (I'm printing from photoshop), the cover is too wide.

I'm also trying to make a 25mm spine case using the measurements of 28.11w x 14.92h in cm, and I'm having problems with that as well. I have no idea what I'm doing wrong, and I'm wasting a lot of good paper and ink in the process.

TripleHBK · 11-06-2018, 02:29 AM

Quote:

Originally Posted by Dynamo of Eternia

I don't know why, but I seem to have this problem whenever I try to print covers after a long time of not having done so. I'm also using a different printer than in the past.

I keep trying to print up the Batman covers that I'm making and I can't get the size right.

Initially I realized that I did make a major mistake with the measurements.

But even with further experimenting that I've done, I keep getting covers that are either a little too big or a little too small.

For the cover that I'm making for a standard elite size case, I'm using the measurements of 26.86w x 14.92h (in CM), which is what other covers people have made seem to often be when I open them in Photoshop and check the measurements, but when I print at that measurement (I'm printing from photoshop), the cover is too wide.

I'm also trying to make a 25mm spine case using the measurements of 28.11w x 14.92h in cm, and I'm having problems with that as well. I have no idea what I'm doing wrong, and I'm wasting a lot of good paper and ink in the process.

http://www.emdb.eu/undercover10/

Use this program to print consistently accurate covers. You can adjust the provided templates or create your own for each size of case as needed. I have templates set for Viva elite cases and Criterion cases which are really the only two pre-sets I ever use. I'd also recommend using mm for the measurements as it will likely prove more accurate in your results.

Justanothercrow421 · 11-07-2018, 02:37 AM

Spartacus

Dynamo of Eternia · 11-07-2018, 04:24 AM

Okay, I think I have the sizing issues more or less straightened out, and a HUGE thanks to TripleHBK for posting the link to that cover printing software!

The Batman covers that I was previously working on are finally done (I think!) Previews and download links are below.

There are two versions of a cover for a 10-disc Blu-Ray case to hold all of the series discs (minus the movies), and a cover for a separate regular Blu-Ray case for the two movies.

https://megaupload.nz/b1HeB1kab5

https://megaupload.nz/caH6B3k4b5

https://megaupload.nz/d3H1Bdkab7

Due to some of the sizing issues that I ran into and had to correct, the text with the disc contents information is a little smaller than the previous updates that I had posted. Be sure to print them with a printer that can handle small text well without it being blurry if at all possible.

I still have other versions that I'm working on and will post later (including a set of 2 six-disc cases to hold all 12 discs from the set, as well as separate covers for each season of the show).

Justanothercrow421 · 11-07-2018, 05:42 AM

Nebraska (with a studio back cover)

11-02-2018, 06:41 PM	#22621
AmishParadise Blu-ray Ninja Top contributor Member since:Dec 2009 Location:Central Florida Home Theater Gallery:23 Trading Score:2	Stranger things have happened to cover art. Updated "Stranger Things" cover art available below. I worked up 4K versions as well. Along the way I dropped the logos from the front portion and a few things from the spine for a cleaner look. Over the weekend I'll work up versions of each with 15mm spines for those that want to go with cases that can hold 4-6 discs. UPDATE... I just finished working up versions with 15mm spines as to accommodate cases that can hold 4-6 discs. While I was at it I changed the images used for the top portion of the spines. I'm also calling out the number of discs in the given release on the back portion now. Well, for the 15mm versions. In any event, enjoy! ____________________________ Stranger Things Cover Art (15mm Spines) *Season 2 (4K):* [Show spoiler] *Season 1 (4K):* [Show spoiler] *Season 2 (Blu-ray):* [Show spoiler] *Season 1 (Blu-ray):* [Show spoiler] ____________________________ Stranger Things Cover Art (11mm Spines) *Season 2 (4K):* [Show spoiler] *Season 1 (4K):* [Show spoiler] *Season 2 (Blu-ray):* [Show spoiler] *Season 1 (Blu-ray):* [Show spoiler] Last edited by AmishParadise; 11-03-2018 at 01:04 PM.

11-04-2018, 03:22 PM	#22634
Justanothercrow421 Senior Member Member since:Aug 2011 Location:UCLA 4K collection:30 Blu-ray collection:1324 DVD collection:25 Trading Score:2	Marathon Man Last edited by Justanothercrow421; 11-04-2018 at 03:34 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Custom cover art for Blu-ray printing thread	General Chat	bpmford	81	04-29-2024 11:54 PM
Official Custom SteelBook™ Cover Art Thread	Blu-ray SteelBooks	jamesaevans	265	05-05-2019 02:29 AM
Official Custom Cover Art Thread(Archived Posts)	Blu-ray Movies - North America	Trean	2598	05-21-2009 07:22 AM
Custom Cover Art - Questions About...	Blu-ray Movies - North America	Trean	0	05-15-2009 05:19 AM

11-03-2018, 03:09 PM	#22623
A Sith Lord? Blu-ray Knight Top contributor Member since:Dec 2012 4K collection:1 Blu-ray collection:575 DVD collection:30 Digital collection:1 iTunes collection:1272 Trading Score:49	Does anyone have the proper dimensions for standard criterion cover?

11-03-2018, 06:23 PM	#22627
donidarko Special Member Top contributor Member since:Aug 2012 Location:Fleetwood, NY 4K collection:131 Blu-ray collection:1034 DVD collection:128 Digital collection:95 Prime collection:76	Anyone doing a Cactus Flower custom cover? I’d do one but don’t have high res. Poster art.

11-03-2018, 07:33 PM	#22629
Monterey Jack Blu-ray Grand Duke Member since:Oct 2011 Trading Score:709	I hate to be a pest, but...any progress on some Batman: TAS customs for a pair of "thick" 6-disc cases? I would pay for any printing and shipping costs on these.

11-06-2018, 01:43 AM	#22635
myway Active Member Member since:Nov 2010	http://euphoricfx.org/forums/ucp.php...g/efxcoverart/ My custom BD cover for the 1951 version of A Christmas Carol is finally done! Much to my surprise, I was never able to find a single custom cover for this movie, so I hope many people find it useful.

11-06-2018, 01:54 AM	#22636
Dynamo of Eternia Blu-ray Knight Top contributor Member since:Dec 2007 4K collection:335 Blu-ray collection:1857 DVD collection:1573 Trading Score:3	I don't know why, but I seem to have this problem whenever I try to print covers after a long time of not having done so. I'm also using a different printer than in the past. I keep trying to print up the Batman covers that I'm making and I can't get the size right. Initially I realized that I did make a major mistake with the measurements. But even with further experimenting that I've done, I keep getting covers that are either a little too big or a little too small. For the cover that I'm making for a standard elite size case, I'm using the measurements of 26.86w x 14.92h (in CM), which is what other covers people have made seem to often be when I open them in Photoshop and check the measurements, but when I print at that measurement (I'm printing from photoshop), the cover is too wide. I'm also trying to make a 25mm spine case using the measurements of 28.11w x 14.92h in cm, and I'm having problems with that as well. I have no idea what I'm doing wrong, and I'm wasting a lot of good paper and ink in the process.

11-07-2018, 02:37 AM	#22638
Justanothercrow421 Senior Member Member since:Aug 2011 Location:UCLA 4K collection:30 Blu-ray collection:1324 DVD collection:25 Trading Score:2	Spartacus

11-07-2018, 04:24 AM	#22639
Dynamo of Eternia Blu-ray Knight Top contributor Member since:Dec 2007 4K collection:335 Blu-ray collection:1857 DVD collection:1573 Trading Score:3	Okay, I think I have the sizing issues more or less straightened out, and a HUGE thanks to TripleHBK for posting the link to that cover printing software! The Batman covers that I was previously working on are finally done (I think!) Previews and download links are below. There are two versions of a cover for a 10-disc Blu-Ray case to hold all of the series discs (minus the movies), and a cover for a separate regular Blu-Ray case for the two movies. https://megaupload.nz/b1HeB1kab5 https://megaupload.nz/caH6B3k4b5 https://megaupload.nz/d3H1Bdkab7 Due to some of the sizing issues that I ran into and had to correct, the text with the disc contents information is a little smaller than the previous updates that I had posted. Be sure to print them with a printer that can handle small text well without it being blurry if at all possible. I still have other versions that I'm working on and will post later (including a set of 2 six-disc cases to hold all 12 discs from the set, as well as separate covers for each season of the show).

11-07-2018, 05:42 AM	#22640
Justanothercrow421 Senior Member Member since:Aug 2011 Location:UCLA 4K collection:30 Blu-ray collection:1324 DVD collection:25 Trading Score:2	Nebraska (with a studio back cover)

Best Blu-ray Movie Deals