BDP-S350 connection to VSX-91TXH - Blu-ray Forum

DaDoctor · 10-15-2008, 04:20 AM

Any assistance for my issue:

I just got the BDP-S350 and have it connected to my Pioneer Elite VSX-91TXH via HDMI. My questions is around audio settings.

In the BDP-S350 Audio setup, I thought I would set the audio setup for "Dolby Digital to Dolby Digital" and "DTS to DTS" as the receiver handles/decodes this. Am I correct, or completely off base?

Curious, as I was playing a Blu-ray disc and the display on my receiver had PCM?

A complete newbie at this stuff:
DaDoctor

Sherm · 10-17-2008, 09:24 PM

that's correct. Do not select Downmix PCM. with the AVR you have you should select Dolby Digital and DTS on the audio set up in the 350. Also I go into the audio set up in each Bluray i play and make sure it's set to DTS or Dolby which ever is present.

Ranger-R · 10-17-2008, 09:44 PM

P.S. You'll want to set to Direct in audio settings as well so your receiver can do the decoding. Then the it should light up on the receiver "DTS Master Audio or TrueHD"

DaDoctor · 10-18-2008, 09:36 PM

Thanks!

I set the audio setting from 'Mix' to 'Direct' and the audio was much better.

Thanks again!!

TENSE · 10-18-2008, 11:32 PM

the onkyo 806 is running at $644 dollars at amazon!

http://www.amazon.com/s/ref=nb_ss_e?...yo+805&x=0&y=0

JasonR · 10-18-2008, 11:35 PM

What does that even have to do with this thread?

10-15-2008, 04:20 AM	#1
DaDoctor New Member Member since:Oct 2008	BDP-S350 connection to VSX-91TXH Any assistance for my issue: I just got the BDP-S350 and have it connected to my Pioneer Elite VSX-91TXH via HDMI. My questions is around audio settings. In the BDP-S350 Audio setup, I thought I would set the audio setup for "Dolby Digital to Dolby Digital" and "DTS to DTS" as the receiver handles/decodes this. Am I correct, or completely off base? Curious, as I was playing a Blu-ray disc and the display on my receiver had PCM? A complete newbie at this stuff: DaDoctor

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Pioneer Elite VSX-91txh - need help	Receivers	Krelldog1977	1	12-21-2009 03:17 PM
VSX-91TXH compared to current models?	Receivers	TZona	1	09-20-2009 03:32 PM
pioneer Elite VSX-91TXH	Receivers	Clapton101	10	12-08-2008 01:15 PM
VSX-91TXH on the way	Home Theater General Discussion	Enkyu	3	08-11-2007 06:14 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-17-2008, 09:24 PM	#2
Sherm Active Member Member since:Oct 2008 Home Theater Gallery:11	that's correct. Do not select Downmix PCM. with the AVR you have you should select Dolby Digital and DTS on the audio set up in the 350. Also I go into the audio set up in each Bluray i play and make sure it's set to DTS or Dolby which ever is present.

10-17-2008, 09:44 PM	#3
Ranger-R Power Member Member since:Jan 2008 Location:Washington Home Theater Gallery:5 Blu-ray collection:1808 Blu-ray reviews:2 Trading Score:80	P.S. You'll want to set to Direct in audio settings as well so your receiver can do the decoding. Then the it should light up on the receiver "DTS Master Audio or TrueHD"

10-18-2008, 09:36 PM	#4
DaDoctor New Member Member since:Oct 2008	Thanks! I set the audio setting from 'Mix' to 'Direct' and the audio was much better. Thanks again!!

10-18-2008, 11:32 PM	#5
TENSE Senior Member Member since:Mar 2008 Location:Los Ageles, Ca Home Theater Gallery:10	the onkyo 806 is running at $644 dollars at amazon! http://www.amazon.com/s/ref=nb_ss_e?...yo+805&x=0&y=0

10-18-2008, 11:35 PM	#6
JasonR Super Moderator Top contributor Member since:Nov 2007 Trading Score:12	What does that even have to do with this thread?

Best Blu-ray Movie Deals