Acoustech H-100 Cinema Series - Blu-ray Forum

t2rules · 02-21-2009, 04:10 AM

I hooked it to my onkyo 806 but the receiver is not detectin it please help
I have the polk TSI400 as Front speakers and the TSI300 for Surrounds

t2rules · 02-21-2009, 07:50 AM

I need to help please

dougalast · 02-21-2009, 02:02 PM

What do you mean "not detectin it"? Not sending a signal? Not turning the amp on automatically?

Never messed with the 806, but do you have sub set to yes in SP setup? I have the H-100 as well and the first time I used the auto-calibration on my older Onkyo, I had to turn the sub power to ON instead of auto. After the first calibration, the auto mode worked fine.

aramis109 · 02-21-2009, 02:29 PM

Yeah, as I replied to you in my pm, you have to run Audyssey's setup. Set the gain to 50-75%, turn the crossover dial(s) all the way up, and run the mic calibration. I'd second turning the sub to "ON" until setup is complete.

t2rules · 02-23-2009, 11:15 PM

Thank you everytinhg is fine now I was using the wrong input

02-21-2009, 04:10 AM	#1
t2rules Active Member Member since:Sep 2008 Home Theater Gallery:15 Blu-ray collection:163 Blu-ray reviews:5	Acoustech H-100 Cinema Series I hooked it to my onkyo 806 but the receiver is not detectin it please help I have the polk TSI400 as Front speakers and the TSI300 for Surrounds

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Can anyone give me their thoughts on the Acoustech Platinum Series PL-200	Subwoofers	Underworld54	24	11-20-2011 01:06 PM
IGN.COM: Top 100 Animated TV Series. The ruining of your childhood, sponsored by IGN.	Movies	xtop	70	07-11-2011 05:36 AM
New Replacement for the BIC Acoustech HT series	Speakers	phlydude	0	01-19-2009 07:31 PM
BIC Acoustech H-100 12" 500 Watt Powered Subwoofer	Home Theater General Discussion	Zarathustra	12	09-06-2007 01:02 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-21-2009, 07:50 AM	#2
t2rules Active Member Member since:Sep 2008 Home Theater Gallery:15 Blu-ray collection:163 Blu-ray reviews:5	I need to help please

02-21-2009, 02:02 PM	#3
dougalast Active Member Member since:Jan 2009 Home Theater Gallery:6 4K collection:26 Blu-ray collection:190 Trading Score:33	What do you mean "not detectin it"? Not sending a signal? Not turning the amp on automatically? Never messed with the 806, but do you have sub set to yes in SP setup? I have the H-100 as well and the first time I used the auto-calibration on my older Onkyo, I had to turn the sub power to ON instead of auto. After the first calibration, the auto mode worked fine.

02-21-2009, 02:29 PM	#4
aramis109 Blu-ray Ninja Member since:Mar 2008 Location:Milwaukee, WI Home Theater Gallery:10 4K collection:4 Blu-ray collection:360 Trading Score:18	Yeah, as I replied to you in my pm, you have to run Audyssey's setup. Set the gain to 50-75%, turn the crossover dial(s) all the way up, and run the mic calibration. I'd second turning the sub to "ON" until setup is complete.

02-23-2009, 11:15 PM	#5
t2rules Active Member Member since:Sep 2008 Home Theater Gallery:15 Blu-ray collection:163 Blu-ray reviews:5	Thank you everytinhg is fine now I was using the wrong input

Best Blu-ray Movie Deals