Custom Cover Art Thread

[jstxanothrxstory]

Originally Posted by kwazygloo

Anyone have the Marvel/StarWars/Pixar movie cover hq images but without all of the extra stuff attached to it? (like the movies anywhere, the top banner etc.) for star wars, I would love Solo, Last Jedi, and Rise of Skywalker to have the slip cover versions but as the case art. Please PM me if you have these, it would be so greatly appreciated.

Just type Star Wars into the "search this thread" option at the top and you'll get plenty of results.

[kwazygloo]

Thank you for the tip. I have been searching I cannot find any that are basically just "clean" versions of the studio releases. What I am wanting is the cover arts that come when you buy from the store (except Solo, Last Jedi, and Rise of Skywalker, I want those in the same style as the others), except all of the extra logos like MA on the bottom right, the top banner, etc. Still want everything else the same though.

[Sowhatwhocaresyo]

Some 80's sci-fi from WB.
a.jpg

aa.jpg

aaa.jpg

[Justanothercrow421]

Made this set for a client who wanted to use a 22mm four-disc Scanavo case and a 17mm three-disc Scanavo case for his WKW set. Nessim Higson's design for the official set was adapted for these.

The preview sort of fudges the dimensions, but everything is lined up, I assure you all haha

Part I

Part II

[Justanothercrow421]

Made this set for a client who wanted to use three 17mm three-disc Scanavo cases for his Zatoichi set.

The spine image connects to form the official set's spine image. Ron Wimberly's artwork was adapted and used for this set.

Part I

Part II

Part III


And the reverse cover for all three:

[kwazygloo]

Does anyone have a slimmed down version (or be willing to make) of the 4K UHD LoTR and Hobbit Trilogy art inserts?

[Sowhatwhocaresyo]

And some 70's sci-fi from WB.
a.jpg

aa.jpg

[BasedSPACER]

I want to issue an apology to everyone who has downloaded my cover art, I've just made the realization that I've been saving them the wrong way in Photoshop for years and that none of them are saved at 300dpi, so they wont scale correctly when trying to print.

I'm going to be spending a lot of my time very soon correcting this error, so pretty much all of the covers on my site will have to be re-uploaded. Please bear with me as I remove all of the previous versions of everything and fix my incredibly stupid oversight.

[Hubunkey]

Still looking for anyone that does commissions. I have quiet a few covers I would want so I would be a long term client

[BasedSPACER]

Nearly all the files have been fixed and re-uploaded to the site, all that's left to fix are the Game of Thrones covers.
I've also used this opportunity to fix any errors I've noticed with some covers, as well as updating the
artwork on some of them. I have a couple new Stranger Things covers on the way to replace the previous set I made.

In the meantime I have posted one new cover available for download now, The Walking Dead Volume 10,
the standard cover for The Walking Dead Season 10 is not yet finished but should be sometime soon.

My sincerest apologies for the inconvenience, everyone.

[eledoremassis02]

W.I.P

[Harvey Plissken]

Originally Posted by madridista8700

Made these for the original saga, and original ONLY!

Those look really classy and nice. I sent you a PM a few days ago. Any chance for the full versions?

[eledoremassis02]

PM for larger size

[Formal Andy]

I've been feeling like attempting my own take at a Bond collection, but fear of coming to close to what everyone here has done. Would never want to do that by accident.

Love the collections all of you have made here. They're fantastic.

[Nissen]

Thought I'd give my old Star Trek set a 4K makeover.

As for the much touted "original poster art" on the upcoming Blu-ray releases, I am horrified they went with the Photoshop recreation of Bob Peak's original art for the first movie, and not the artwork proper. I have stuck to the original version, thank you very much.

Download links available by PM request.

Oh, and here is what the rest of the series looks like, for the old BDs. I'll be making 4K versions of these as well, when the actual 4K releases materialize.

[eledoremassis02]

An idea I had (original poster*ish* covers), would anyone be interested in a continuing series with Dragon Dynasty DVDs?

[Sowhatwhocaresyo]

Originally Posted by Formal Andy

I've been feeling like attempting my own take at a Bond collection, but fear of coming to close to what everyone here has done. Would never want to do that by accident.

Love the collections all of you have made here. They're fantastic.

Naah, I say go for it! All interpretations are welcome and appreciated

[AdmiralNoodles]

Originally Posted by Nissen

Thought I'd give my old Star Trek set a 4K makeover.

As for the much touted "original poster art" on the upcoming Blu-ray releases, I am horrified they went with the Photoshop recreation of Bob Peak's original art for the first movie, and not the artwork proper. I have stuck to the original version, thank you very much.

Download links available by PM request.

[Show spoiler]

Oh, and here is what the rest of the series looks like, for the old BDs. I'll be making 4K versions of these as well, when the actual 4K releases materialize.

It's of my opinion since these four are fully remastered for both 4K+BD, none of the design elements from the prior releases should be used. Especially for the spine and reverse covers regarding the fonts, the annoying carry-over from using TOS TV font when it should be entirely new, sticks out like a sore thumb. That has seriously bugged me regarding the individual releases of the TOS films on BD. Should use the font of the taglines for each respective film poster in the replacement of the TOS TV font, IMO.
The spines would be better fit with using the original poster fonts too or what's used on the spines of the remastered Blus. The spines for the 4K+BD sets you've made still feel as though they belong with the DNR'd messes of the initial BDs when it should be a brand new start regarding the design.
Of course I'm still using your now 'outdated' covers for I-IV BDs but still not outdated regarding the BDs of V-X. Far more minimalist on the official remastered release regarding the front and spines, but do agree the Bob Peak art should have been used for TMP. Prefer your take on using the entire front for the original poster artworks. Can't really tell if you're using production stills or the older screenshots from the BD for the images on the reverse.
This is what I mean by the spines. All that's needed is having the 4K UltraHD disc logo added as to separate it from the BD DNR releases. Obviously excluding the 2016 BD of TWOK. IMO, it should be easier to differentiate the new remasters from the older, initial, releases. i.e. Having the remastered releases of I-IV being the immediate draw with the more classic/retro and having the rest playing catch up would be ideal.
BIG APOLOGIES though Nissen for the obvious rambling. These still seem to be WIP and not finalized for the complete remasters, as I've mentioned already, from the initial releases. Awesome work still and deserves a Version 2 which I'd love to see!

In fact, I'd rather want to commission you for what I suggested regarding STAR TREK I-IV 4K+BD remastered covers over the Alfred Hitchcock custom cover ideas I had.

[Nissen]

Originally Posted by AdmiralNoodles

[Show spoiler]It's of my opinion since these four are fully remastered for both 4K+BD, none of the design elements from the prior releases should be used. Especially for the spine and reverse covers regarding the fonts, the annoying carry-over from using TOS TV font when it should be entirely new, sticks out like a sore thumb. That has seriously bugged me regarding the individual releases of the TOS films on BD. Should use the font of the taglines for each respective film poster in the replacement of the TOS TV font, IMO.
The spines would be better fit with using the original poster fonts too or what's used on the spines of the remastered Blus. The spines for the 4K+BD sets you've made still feel as though they belong with the DNR'd messes of the initial BDs when it should be a brand new start regarding the design.
Of course I'm still using your now 'outdated' covers for I-IV BDs but still not outdated regarding the BDs of V-X. Far more minimalist on the official remastered release regarding the front and spines, but do agree the Bob Peak art should have been used for TMP. Prefer your take on using the entire front for the original poster artworks. Can't really tell if you're using production stills or the older screenshots from the BD for the images on the reverse.
This is what I mean by the spines. All that's needed is having the 4K UltraHD disc logo added as to separate it from the BD DNR releases. Obviously excluding the 2016 BD of TWOK. IMO, it should be easier to differentiate the new remasters from the older, initial, releases. i.e. Having the remastered releases of I-IV being the immediate draw with the more classic/retro and having the rest playing catch up would be ideal.
BIG APOLOGIES though Nissen for the obvious rambling. These still seem to be WIP and not finalized for the complete remasters, as I've mentioned already, from the initial releases. Awesome work still and deserves a Version 2 which I'd love to see!

In fact, I'd rather want to commission you for what I suggested regarding STAR TREK I-IV 4K+BD remastered covers over the Alfred Hitchcock custom cover ideas I had.

No need to apologize, your passion is to be commended. But we certainly have differing tastes, as these are in no way WIP and represent my personal preferences. I'd happily accept a commission to tailor these to your tastes. PM me if you'd like to pursue that further.

[stardragon9]

Originally Posted by eledoremassis02

An idea I had (original poster*ish* covers), would anyone be interested in a continuing series with Dragon Dynasty DVDs?

[Show spoiler]

I for one would be interested. I say go for it!