Official Denon Owners Thread - Page 38 - Blu-ray Forum

JimShaw · 04-28-2015, 10:26 PM

Quote:

Originally Posted by -RONIN-

Took your advice but I have to say they were not very helpful. Got the impression they just wanted me to buy a new AV. It was almost like a sales call more than anything. Kept telling about the newer features on the new AVRs. They gave me a reset procedure to do on my receiver but other than that they didn't have much advice. Oh well, at least I can turn off the heights and run it as a 5.1 for the time. Looks like I will have to start looking at a new AVR if I want heights back.

That's too bad. I have not had that problem.

The reset didn't help? Over the years, I had had to reset a couple times and that seem to fix what was going on with mine.

schan1269 · 04-28-2015, 11:31 PM

Quote:

Originally Posted by -RONIN-

Took your advice but I have to say they were not very helpful. Got the impression they just wanted me to buy a new AV. It was almost like a sales call more than anything. Kept telling about the newer features on the new AVRs. They gave me a reset procedure to do on my receiver but other than that they didn't have much advice. Oh well, at least I can turn off the heights and run it as a 5.1 for the time. Looks like I will have to start looking at a new AVR if I want heights back.

Is it the same terminals for 7.1?

If so, swap to 7.1 to see it is an amp issue(fixable) or processor(not possible).

-RONIN- · 04-28-2015, 11:38 PM

Quote:

Originally Posted by schan1269

Is it the same terminals for 7.1?

If so, swap to 7.1 to see it is an amp issue(fixable) or processor(not possible).

You mean instead of assigning the amp as heights, run them as the backs? The heights and back terminals are the same.

schan1269 · 04-29-2015, 04:06 AM

Quote:

Originally Posted by -RONIN-

You mean instead of assigning the amp as heights, run them as the backs? The heights and back terminals are the same.

That is exactly what I mean.

If it is the amp stage it can possibly be fixed.

But, no chance if it is the board.

Don't even have to move the speaker, just swap set up and check for noise.

probedb · 04-29-2015, 08:34 AM

Since moving house my Denon AVR has developed a problem with the multi-channel in. It's an old 2805 (UK model). I used to have my Oppo multi-channel outs connected, using the Denon purely for volume control and no processing.

However since my move, obviously unplugging cables and plugging back in, the sound from the multi-channel in always overrides whatever is selected, whatever the input and whether or not I selected Ext-In, it also plays very loud and the volume control does nothing to it.

It's as if it suddenly turned into a proper power amp.

Everything else works fine.

New AVR time (assuming I want HD audio again)? It's not worth a great deal so I can't see it being worth replacing components.

Any help much appreciated

Thanks,
Paul.

-RONIN- · 04-29-2015, 03:12 PM

Quote:

Originally Posted by schan1269

That is exactly what I mean.

If it is the amp stage it can possibly be fixed.

But, no chance if it is the board.

Don't even have to move the speaker, just swap set up and check for noise.

That is a really great suggestion. Cannot believe I didn't think of that. As soon as I get a chance I will give it a try. Thanks.

Mike7300 · 05-02-2015, 04:37 AM

Does denon have 2015 models out yet?

schan1269 · 05-02-2015, 04:40 PM

Quote:

Originally Posted by Mike7300

Does denon have 2015 models out yet?

Nope.

The only two, so far, announced 2015 are the Pioneer 830/1130.

film11 · 08-19-2015, 04:55 PM

Quote:

Originally Posted by schan1269

Nope.

The only two, so far, announced 2015 are the Pioneer 830/1130.

The 2015 models are out, including the 710

schan1269 · 08-19-2015, 05:09 PM

Quote:

Originally Posted by film11

The 2015 models are out, including the 710

Don't know what country you are in...but current(2015 release) are X30 in the US.

So far...as Pioneer...530, 830 and 1130.
As Elite...the 91.

Curiously...no mention of DTS X...

film11 · 08-19-2015, 05:12 PM

Quote:

Originally Posted by schan1269

Don't know what country you are in...but current(2015 release) are X30 in the US.

So far...as Pioneer...530, 830 and 1130.
As Elite...the 91.

Curiously...no mention of DTS X...

I'm in the U.S. and was responding regarding Denon. Not only have I seen the 2015 models, I bought the 710 (DTS:X capable.)

schan1269 · 08-19-2015, 05:15 PM

Quote:

Originally Posted by film11

I'm in the U.S. and was responding regarding Denon. Not only have I seen the 2015 models, I bought the 710 (DTS:X capable.)

Oh...

You responded to a response posted in May...

Things tend to change in 3 months...

Jutty · 08-27-2015, 06:21 PM

Just looking for a bit of advice..
We had a big thunderstorm here,nearly shaking the house,after one particular rumble, my Denon 1612's HDMI output stopped, not working,, when i switch it to the tuner or start up the playstation,, i can hear the start up / Radio , but nothing is displayed on the TV.
Ive tried changing out the cables, using different inputs on the TV,,even reset the processor,but nothing worked.
Everything is plugged into surge protectors,and none of my other electronics have problems ( tivo, Bd players, ps4, pc's ).
Reckon its time to look into another receiver or is it worth trying to get it repaired?

Terrorfirmer · 08-30-2015, 07:11 PM

I'm planning on buying an AVR S710W tomorrow. I've been reading reviews but haven't really found anything with pro/cons. Anybody have sn opinion on these, or info I should know?

SixSpeedSamurai · 08-31-2015, 07:51 PM

Quote:

Originally Posted by Terrorfirmer

I'm planning on buying an AVR S710W tomorrow. I've been reading reviews but haven't really found anything with pro/cons. Anybody have sn opinion on these, or info I should know?

I was thinking about the S710, but after reading this I'm leaning towards the X1200.

http://www.audioholics.com/av-receiv...and-avr-x2200w

Terrorfirmer · 09-01-2015, 02:46 AM

Quote:

Originally Posted by SixSpeedSamurai

I was thinking about the S710, but after reading this I'm leaning towards the X1200.

http://www.audioholics.com/av-receiv...and-avr-x2200w

The x1200w sounds pretty decent. I picked up the s710w today, i havent hooked it up yet but i think it will cover all my needs

. Buying a receiver definately isnt an easy decision though, there are so many brands and varying reviews, it can get pretty crazy. I think i did pretty good with this one though for my first receiver.

SixSpeedSamurai · 09-01-2015, 02:02 PM

Quote:

Originally Posted by Terrorfirmer

The x1200w sounds pretty decent. I picked up the s710w today, i havent hooked it up yet but i think it will cover all my needs

. Buying a receiver definately isnt an easy decision though, there are so many brands and varying reviews, it can get pretty crazy. I think i did pretty good with this one though for my first receiver.

I'm sure it will be great. My first receiver is dying after 7 years and that is what brought me to the Denon. After my experience with the issues with the Onkyo 606, the three year warranty of the 1200 is a big factor for me. Enjoy!

film11 · 09-02-2015, 06:24 PM

Quote:

Originally Posted by Terrorfirmer

The x1200w sounds pretty decent. I picked up the s710w today, i havent hooked it up yet but i think it will cover all my needs

.

Mine as well. I picked one up for $399...at that price, it was an easy decision!

Jutty · 09-03-2015, 10:17 AM

I was gonna go for the 710 but managed to get the X2100 for $329.
Kinda glad i did, due to me damn cable box not talking properly to the receiver,, which its fixed by either using composite cables going to the receiver or buy using a HDMI switch ( mines on its way).
Either way,both receivers are great.

Terrorfirmer · 09-04-2015, 04:41 AM

Quote:

Originally Posted by film11

Mine as well. I picked one up for $399...at that price, it was an easy decision!

$399!

Man, we get so gouged in Canada... My 710w came like $620 with tax and that was on sale for $150 off original price lol.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
The Official Velodyne Subwoofer Owners Thread	Subwoofers	Big Daddy	318	08-22-2025 07:56 AM
The Official Sunfire Subwoofer Owners Thread	Subwoofers	Big Daddy	51	07-04-2018 06:02 PM
The Official Yamaha RX V663 Owners Thread	Receivers	Robmx	634	11-30-2017 01:46 PM
Official Sharp AQUOS Owners Thread	LCD TVs	California93	44	06-25-2014 07:10 PM
Denon 788/1908 Owners Thread	Receivers	bhampton	10	05-05-2008 05:06 PM

04-29-2015, 08:34 AM	#745
probedb Member Member since:Sep 2009 Blu-ray collection:78	Since moving house my Denon AVR has developed a problem with the multi-channel in. It's an old 2805 (UK model). I used to have my Oppo multi-channel outs connected, using the Denon purely for volume control and no processing. However since my move, obviously unplugging cables and plugging back in, the sound from the multi-channel in always overrides whatever is selected, whatever the input and whether or not I selected Ext-In, it also plays very loud and the volume control does nothing to it. It's as if it suddenly turned into a proper power amp. Everything else works fine. New AVR time (assuming I want HD audio again)? It's not worth a great deal so I can't see it being worth replacing components. Any help much appreciated Thanks, Paul.

05-02-2015, 04:37 AM	#747
Mike7300 Active Member Member since:Sep 2008	Does denon have 2015 models out yet?

08-27-2015, 06:21 PM	#753
Jutty Power Member Member since:Aug 2009 Location:Beaufort SC (British Expat) 4K collection:253 Blu-ray collection:1273 DVD collection:46 MA collection:2 Digital collection:1033 iTunes collection:79 Trading Score:22	Just looking for a bit of advice.. We had a big thunderstorm here,nearly shaking the house,after one particular rumble, my Denon 1612's HDMI output stopped, not working,, when i switch it to the tuner or start up the playstation,, i can hear the start up / Radio , but nothing is displayed on the TV. Ive tried changing out the cables, using different inputs on the TV,,even reset the processor,but nothing worked. Everything is plugged into surge protectors,and none of my other electronics have problems ( tivo, Bd players, ps4, pc's ). Reckon its time to look into another receiver or is it worth trying to get it repaired?

08-30-2015, 07:11 PM	#754
Terrorfirmer Blu-ray Guru Top contributor Member since:Apr 2012 Location:Canada 4K collection:53 Blu-ray collection:1037 DVD collection:282 Trading Score:11	I'm planning on buying an AVR S710W tomorrow. I've been reading reviews but haven't really found anything with pro/cons. Anybody have sn opinion on these, or info I should know?

09-03-2015, 10:17 AM	#759
Jutty Power Member Member since:Aug 2009 Location:Beaufort SC (British Expat) 4K collection:253 Blu-ray collection:1273 DVD collection:46 MA collection:2 Digital collection:1033 iTunes collection:79 Trading Score:22	I was gonna go for the 710 but managed to get the X2100 for $329. Kinda glad i did, due to me damn cable box not talking properly to the receiver,, which its fixed by either using composite cables going to the receiver or buy using a HDMI switch ( mines on its way). Either way,both receivers are great.

Best Blu-ray Movie Deals