Steelbook Wall Storage Solution

[cherbert]

I purchased some self-adhesive magnetic strips. They worked really well.



Amazon Link

[Shaggy1978]

Very cool idea! Nice and clean looking and great for limited space!

Would the magnets be strong enough to hold a Full Slip like Blufans?

[cherbert]

Originally Posted by Shaggy1978

Very cool idea! Nice and clean looking and great for limited space!

Would the magnets be strong enough to hold a Full Slip like Blufans?

Not quite but quite possibly if you used two strips. I'm just about getting away with 1 strip. But 2 evenly spaces strips of magnet on the wall would be much stronger.

Alternatively cut vertical pieces of magnetic strip for a stronger hold.

[lucylu]

nice one! I'm thinking of doing something like this

[jmspls72]

Originally Posted by cherbert

I purchased some self-adhesive magnetic strips. They worked really well.



Amazon Link

Thanks for the post. I am doing the same thing once I have all 22 of the Marvel 4K steelbooks. I will also have a infinity gauntlet. To incorporate in the project.

[Corey31]

Are these strong enough to hold Steelbooks with plastic protectors on them? Either the ones that come with Mondo Steelbooks or the Blu-Steels type.

[SlayersCouncil]

I posted this in the "Post Pictures of Your Blu-ray Collection" thread. Looking for suggestions to my problem explained below the photo.

Originally Posted by SlayersCouncil

So I got some self-adhesive magnets from Amazon to display a few (not nearly all) of my Steelbooks on the small strip of wall next to my Blu-ray shelf. I was very happy with the results.



The magnets I used came from a sheet with of 1"x1" squares that you could brake off for any size you want. I chose to use 4 squares for each case (2"x2"). The product claims to use "strong 3M brand adhesive".
Then, I went to bed and an hour later, I heard one fall. I went in the room and Saving Private Ryan was on the floor with the magnets still stuck to the back. The adhesive did not hold to the wall. I assumed I just did not press the magnets hard enough to the wall or maybe I did not give the adhesive enough time to bond to the wall. Minutes later, two more had fallen so I pulled then all down and decided to try again after work today.

Any suggestions? More squares? Waiting longer between placing the magnets and adding the Steelbooks? Adding additional adhesive to the back of the magnets?

The strength of the magnets is not an issue as each one clings to the back of the case extremely well.

[jmspls72]

Originally Posted by SlayersCouncil

I posted this in the "Post Pictures of Your Blu-ray Collection" thread. Looking for suggestions to my problem explained below the photo.

Hey slayercouncil were did you get the Blu-ray storage unit or is soy shelves

[SlayersCouncil]

Originally Posted by jmspls72

Hey slayercouncil were did you get the Blu-ray storage unit or is soy shelves

I made it myself. Follow the first link in my signature information about the build with photos.

[jmspls72]

Originally Posted by SlayersCouncil

I made it myself. Follow the first link in my signature information about the build with photos.

Thanks very nice job

[Anthifisher]

Here's my MCU setup. I plan on doing the same on another wall when the Star Wars 4k Steelbooks start coming out or possibly blu fans if Disney ever reach an agreement.