Quote:
Originally Posted by H8MACHINE
Well everytime i use auto cal, i get error 33 right after the first set of sound, base on the manual, error 33 is when a speaker is missing. All 5 are there and working exept the subwoofer
|
Make sure the auto-cal mic is plugged all the way in. I though it was when I did it the other day, but I had to push a little harder than I would have thought.
No silver (plug-in piece) should be showing. Then try again. Good Luck!
Also to just increase the back speaker level do the following:
press MENU
scroll down just once to see <LEVEL>
press -right once
scroll down till you see SL Level (Surround Left)
press- right-increase a few db's
Then repeat the above and go to SR level (Surround Right)
adjust the db's the same.
Hope this helps.