SONY STR-DG820, how to level up sound for back speakers?

[DeadDog]

Originally Posted by H8MACHINE

Well everytime i use auto cal, i get error 33 right after the first set of sound, base on the manual, error 33 is when a speaker is missing. All 5 are there and working exept the subwoofer

Make sure the auto-cal mic is plugged all the way in. I though it was when I did it the other day, but I had to push a little harder than I would have thought.

No silver (plug-in piece) should be showing. Then try again. Good Luck!


Also to just increase the back speaker level do the following:

press MENU
scroll down just once to see <LEVEL>
press -right once
scroll down till you see SL Level (Surround Left)
press- right-increase a few db's

Then repeat the above and go to SR level (Surround Right)
adjust the db's the same.

Hope this helps.