Blu-ray Problem

[CD82]

my Sony s360 will not play the crank 2 blu ray for some reason. it gets to the voltage logo an loads an never finishes then comes up with half a picture about a nickle size on the screen.

no other blu rays do this on this player


but when i put the crank 2 blu ray in my ps3 no problems at all


what could be the problem here

[Blu-ray Fanatic]

Is your player up-to-date?

[CD82]

yes it is that was the first thing i tried

other blu rays work fine this is the only toruble ive had

hope nothing is wrong with it i got it from amazon an watched severl movies on it an trashed the boxs heh


but the ps3 plays it fine the movie

[Moefiz]

Originally Posted by Blu-ray Fanatic

Is your player up-to-date?

What Blu-ray said..check your firmware...

[CD82]

ive check the firmware no updates what else could be the issue?

[Blu-ray Fanatic]

Originally Posted by CD82

yes it is that was the first thing i tried

other blu rays work fine this is the only toruble ive had

hope nothing is wrong with it i got it from amazon an watched severl movies on it an trashed the boxs heh


but the ps3 plays it fine the movie

Hmmm. Sometimes a movie won't work if your player is still connected to the internet. Disconnect it and insert the movie again.

[CD82]

player was not connected to the net

[Moefiz]

Two things....

Exchange the movie for another one or call Sony's CS and let them know about the problem..could be a firmware problem since its new.

[Blu-ray Fanatic]

Originally Posted by CD82

player was not connected to the net

Well then, your player may be defective. Keep working on it (Disconnect the player and connect again, reset, etc.)

[CD82]

if it were defevtive whouldnt it do this to other blu rays? this is the only one its done this too so far

and my ps3 is having no issues playing it


if it is defective will i have to buy a new one or will sony fix it?

[Rob J in WNY]

Bummer, CD82.

Seems like Crank 2 is a BD to keep our eyes on. Another person had issues as well, but found a workaround for his Panasonic BD player.

https://forum.blu-ray.com/showthread.php?t=113491

[CD82]

guess i kinda shoulda waited an got the s560 but oh well heh

may still get that player

atleast i got the ps3 to play it an it loads an works fine there


im just not big on using the ps3 watching movies

[Blu-ray Fanatic]

Crank 2 works fine on my Sylvania. Sorry Bud, bad luck for you.

[CD82]

so why is it working fine on the ps3 and not the sony 360

[hometheatergeek]

Originally Posted by CD82

so why is it working fine on the ps3 and not the sony 360

PS3 has internal memory your other player does not. You need to put a SD card in the player for the movie to load.

[CD82]

ill clean my 4gig off tonight then and try it

[alchav21]

Originally Posted by CD82

ill clean my 4gig off tonight then and try it

Well here we go again with this Panasonic DMP-BD35 not playing "Crank 2." I tried everything suggested here, and the Memory only got me to almost Play with a error message saying "Software Violation."

I tried an SD 4Gb card, and nothing, it still would not play. The Memory card I have is a 4 GB PNY SD HC 60Min HD. Is this the correct Memory, or do I need to get a different one?

[luckyirish]

I have the same exact problem I have the panasonic dmp bd60 bought crank2 the other day And it only plays about a 10 inch screen in the center of my 50 inch television. I have already exchanged the movie and the new one did the same thing. I have no problems with any other blu-rays? I was wondering if you found a solution?

[Rblu-Dblu]

Originally Posted by luckyirish

I have the same exact problem I have the panasonic dmp bd60 bought crank2 the other day And it only plays about a 10 inch screen in the center of my 50 inch television. I have already exchanged the movie and the new one did the same thing. I have no problems with any other blu-rays? I was wondering if you found a solution?

Read about 4 posts above yours.