Newbie blu-ray problem

[trekgod3]

Hi everyone, new member and blu-ray owner here. We just got a Memorex MVBD2511 from Wal-Mart for $148 a few weeks ago. It is connected via a HDMI to a 51" Hitatchi 1080i projection HDTV. I bought four of Wal-Mart's $10 blu-rays- Terminator 2, Saw 1 and 2, and Stargate. They all play fine-menus load quickly and are responsive-no picture or audio problems. The problem I have is with Hancock and The Dark Knight. Those movies will play for about 10 to 30 minutes then suddenly the screen goes snowy (like tuning in to a channel you don't get on a really old TV) and the sound goes out,too. The disruption lasts for 5 to 30 seconds, then the picture and sound come back on. If I unplug and re-plug the HDMI, it comes back on,too. At first we were using a $15 Walmart HDMI, but I just switched to a $50 Rocketfish cable that is rated for 10.2GB/s and 120Hz. Still having the same problem. The other thing I noticed was the underside of the discs. On the four cheapies I got at walmart, they look like a shiny regular DVD or CD looks. But, on Hancock and the Dark Knight, the underside is shiny and has a wavy rainbow pattern-kind of like an oil/gas spill. Any ideas? My next step is to get a set of Component cables and see if that makes a difference over the HDMI.
If someone could check the undersides of their copies of Hancock and Dark Knight, I would appreciate it . My mother-in-law bought them for us for Christmas from an online store. Thanks for your help!

[Blu As Hell]

Hey!!!! Welcome to the site!!!! I think this link might help you.

http://www.memorex.com/support/suppo...d=50719&cid=55

Sounds like a firmware problem to me so this will help. Just follow the instructions and you'll be good to go in no time.

Also this quoted from rdodolak

Most firmware has been provided as an .iso file which needs to be burned to the disc as an image vs. a data disc. However, it seems Memorex simply zipped the contents of the disc and provided that as a download. That could be a potential problem depending on how the player recognizes the disc.

I see that they provided two firmware releases; one on 12/15 and another on 12/24. Which one did you try? What does the contents of the burned CD-R show?

It appears the firmware file structure is vary similar to the firmware contents for the Olevia Blu-ray player. A number of those users are also experiencing issues with getting that player to recognize the firmware disc.

Blu-ray Disc Player MVBD2510

EDIT: Other notes of caution per Memorex instructions:

Unzip the firmware and burn the unzip files (make sure only the files are being burned and not a parent folder) on a blank CD-R disc.
Warning: do not burn the unzip files on a blank CD+R /CD-RW/ CD+RW disc.


Quote:
Q: What does the firmware dated December 24th do?

A: This firmware improved disc compatibility. Most of the latest releases from Fox can be played. We tested it with latest Fox released movie "Horton Hears a Who", which wasn't played in previous firmware but played in this version.
We also tested the below BD discs with this firmware, all can be played properly.

"The Dark Knight"(Warner Bros.)
"Transformers"(Paramount)
"Spiderman 3"(Columbia)
"21"(Columbia)
"Resident Evil: Extinction"(Sony)
"The Legend of Zorro"(Columbia)

We expect another firmware update to be available the week of January 5th.


--------------------------------------------------------------------------------

[trekgod3]

That firmware if for the 2510. I have the 2511. I don't want to risk messing up the player by flashing it with the wrong firmware.

[JimShaw]

Welcome Trelgod3.

You'll find this is a great forum with a lot of good people ready to help.

[Blu As Hell]

Originally Posted by trekgod3

That firmware if for the 2510. I have the 2511. I don't want to risk messing up the player by flashing it with the wrong firmware.

Let me do some diggin', and see what I can find.

[trekgod3]

Thanks! I checked the Memorex site, and they haven't released any firmware for the 2511 yet.

[Blu As Hell]

Originally Posted by trekgod3

Thanks! I checked the Memorex site, and they haven't released any firmware for the 2511 yet.

Yeah, I just saw that myself. I did see a note about another firmware release on January 5th on the site, hopefully that will be for the 2511.