Mounting Panasonic TC-P50V10 on a wall - Blu-ray Forum

DAAKNESS · 08-12-2009, 05:50 AM

I just purchased a Panasonic TC-P50V10 plasma tv and I would like to mount it on my wall in my finished basement. TV weighs 75 lbs. I would like to buy a mount from monoprice.com. Are their mounts reliable? Want some opinions.

xneox · 08-12-2009, 10:53 AM

Quote:

Originally Posted by DAAKNESS

mount it on my wall in my finished basement

Do you have full-size (2x4 or larger) wood studs in your finished basement?

igotcabada · 08-12-2009, 12:29 PM

Yes the monoprice mounts are very reliable

igotcabada · 08-12-2009, 12:33 PM

Any of these should do the trick:

http://www.monoprice.com/products/pr...seq=1&format=2
http://www.monoprice.com/products/pr...seq=1&format=2
http://www.monoprice.com/products/pr...seq=1&format=2
http://www.monoprice.com/products/pr...seq=1&format=2
http://www.monoprice.com/products/pr...seq=1&format=2

Hammie · 08-12-2009, 01:50 PM

I have a 50" Panasonic 850u plasma on the Monoprice PREMIUM mount. It's still up after being there a week.

In my opinion, if you just want a wall mount, you do not need to spend tons of cash. On the other hand, if you are looking for a swivel mount or arm mount, you should spend a little more or at least make sure it is built from solid materials.

syncguy · 08-12-2009, 02:43 PM

Quote:

Originally Posted by xneox

Do you have full-size (2x4 or larger) wood studs in your finished basement?

Good question. Make sure that you screw the bracket securely into the middle of the wood studs.

igotcabada · 08-12-2009, 03:57 PM

You will also be able to use concrete anchors & bolts/screws if you are going into a concrete wall

DAAKNESS · 08-12-2009, 04:05 PM

I am not sure if my studs are 2x4 or larger. Thanks for the links on the monoprice mounts.

Steve · 08-12-2009, 08:37 PM

I also use a monoprice mount, and I highly recommend them.

HeManster03 · 08-12-2009, 10:01 PM

my 42pz80u panny is on a monoprice tilting mount...pictures in my gallery....and it has held up very well..the holes to put your wall anchors through are spaced out very well, so if your studs are a bit closer you could do 3 on top and 3 on bottom, or just 2 like i did. either way, i definately recommend them.

08-12-2009, 05:50 AM	#1
DAAKNESS Member Member since:May 2008	Mounting Panasonic TC-P50V10 on a wall I just purchased a Panasonic TC-P50V10 plasma tv and I would like to mount it on my wall in my finished basement. TV weighs 75 lbs. I would like to buy a mount from monoprice.com. Are their mounts reliable? Want some opinions.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Should I pick LG 47LG90 LED TV or Panasonic TC-P50V10 Plasma?	Display Theory and Discussion	mugupo	6	06-13-2009 10:11 PM
Panasonic TC-P50V10 available?	Plasma TVs	_kirk_	20	05-22-2009 08:49 PM
Wall Mounting	Plasma TVs	Musashi	6	01-19-2009 08:48 PM
Wall Mounting	Home Theater General Discussion	nothing.sound	9	11-12-2007 02:38 PM

08-12-2009, 12:29 PM	#3
igotcabada Special Member Top ranked HT gallery Member since:Jan 2009 Location:NC Home Theater Gallery:22 Blu-ray collection:37	Yes the monoprice mounts are very reliable

08-12-2009, 12:33 PM	#4
igotcabada Special Member Top ranked HT gallery Member since:Jan 2009 Location:NC Home Theater Gallery:22 Blu-ray collection:37	Any of these should do the trick: http://www.monoprice.com/products/pr...seq=1&format=2 http://www.monoprice.com/products/pr...seq=1&format=2 http://www.monoprice.com/products/pr...seq=1&format=2 http://www.monoprice.com/products/pr...seq=1&format=2 http://www.monoprice.com/products/pr...seq=1&format=2

08-12-2009, 01:50 PM	#5
Hammie Blu-ray Champion Top ranked HT gallery Top contributor Member since:May 2008 Location:Washington, DC Metro Home Theater Gallery:53 Blu-ray collection:545 DVD collection:12 Trading Score:12	I have a 50" Panasonic 850u plasma on the Monoprice PREMIUM mount. It's still up after being there a week. In my opinion, if you just want a wall mount, you do not need to spend tons of cash. On the other hand, if you are looking for a swivel mount or arm mount, you should spend a little more or at least make sure it is built from solid materials.

08-12-2009, 03:57 PM	#7
igotcabada Special Member Top ranked HT gallery Member since:Jan 2009 Location:NC Home Theater Gallery:22 Blu-ray collection:37	You will also be able to use concrete anchors & bolts/screws if you are going into a concrete wall

08-12-2009, 04:05 PM	#8
DAAKNESS Member Member since:May 2008	I am not sure if my studs are 2x4 or larger. Thanks for the links on the monoprice mounts.

08-12-2009, 08:37 PM	#9
Steve Blu-ray Knight Top ranked HT gallery Top contributor Member since:May 2008 Location:Anna, TX 4K collection:128 Blu-ray collection:416 Trading Score:41	I also use a monoprice mount, and I highly recommend them.

08-12-2009, 10:01 PM	#10
HeManster03 Senior Member Member since:Oct 2008 Location:Northeast Ohio Home Theater Gallery:49 Blu-ray collection:4 Blu-ray reviews:1	my 42pz80u panny is on a monoprice tilting mount...pictures in my gallery....and it has held up very well..the holes to put your wall anchors through are spaced out very well, so if your studs are a bit closer you could do 3 on top and 3 on bottom, or just 2 like i did. either way, i definately recommend them.

Best Blu-ray Movie Deals