Bi-amping - Blu-ray Forum

blurayistheway · 11-27-2007, 03:07 AM

I have a elite 91txh and clr 2002 center. wondering can i bi amp my center channel?

m6bigdog · 11-27-2007, 03:42 AM

The advantages of Bi-Amp'ing is to reduce the effects that driving a high power large woofer (10-12-15") has on the distortion of the low power small drivers (mid-range & tweeters) connected to the same amp.

Also, Bi-Amp'ing means the dampening factor for the large woofer is not reduced by the series inductor in the passive crossover.

While I have no experience with the C/L/R 2002 and its previsions for Bi-Amp'ing - in the big scheme of surround sound and total sound stage - as with most effects speakers, the C/L/R 2002 only has a couple of 5-1/4 low frequency drivers that would provide little advantage for the extra effort and expense of adding a 2-way electronic crossover and additional amplifier to Bi-Amp the center channel.

blurayistheway · 11-27-2007, 11:03 PM

I have no intentions of adding an additional amp, only to use the two channels which aren't in use (6/7). It is set up so that you can use the additional channels to bi amp the l/r channels. i already have the sub in my 7002s active via lfe. but thought i could bi-amp the center channel.

11-27-2007, 03:07 AM	#1
blurayistheway Member Member since:Feb 2007 Location:colorado	Bi-amping I have a elite 91txh and clr 2002 center. wondering can i bi amp my center channel?

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Bi-Amping	Receivers	bighouse	11	12-15-2009 08:45 PM
Bi-amping	Receivers	stickb5	1	05-20-2009 08:27 PM
Bi-amping	Audio Theory and Discussion	nothing.sound	15	01-13-2009 01:03 AM
BI-amping	Home Theater General Discussion	saprano	9	11-15-2008 04:31 PM
Question about bi-amping and 7.1	Receivers	parklyfe	4	10-13-2007 09:03 PM

11-27-2007, 03:42 AM	#2
m6bigdog Member Member since:Jul 2007 Location:CA	The advantages of Bi-Amp'ing is to reduce the effects that driving a high power large woofer (10-12-15") has on the distortion of the low power small drivers (mid-range & tweeters) connected to the same amp. Also, Bi-Amp'ing means the dampening factor for the large woofer is not reduced by the series inductor in the passive crossover. While I have no experience with the C/L/R 2002 and its previsions for Bi-Amp'ing - in the big scheme of surround sound and total sound stage - as with most effects speakers, the C/L/R 2002 only has a couple of 5-1/4 low frequency drivers that would provide little advantage for the extra effort and expense of adding a 2-way electronic crossover and additional amplifier to Bi-Amp the center channel.

11-27-2007, 11:03 PM	#3
blurayistheway Member Member since:Feb 2007 Location:colorado	I have no intentions of adding an additional amp, only to use the two channels which aren't in use (6/7). It is set up so that you can use the additional channels to bi amp the l/r channels. i already have the sub in my 7002s active via lfe. but thought i could bi-amp the center channel.

Best Blu-ray Movie Deals