Help w/ Sony KDS 55A-3000 Blu-Ray picture issues: - Blu-ray Forum

Hendunesia · 05-23-2008, 04:34 PM

I have a Sony SXRD Projection 1080p HDTV running BLU from a PS3 with HDMI cables.

For the first few weeks I was in just Awe of Blu Movies and and my 55" TV... but now that I am really analyzing the Picture; I notice a few things I think are wrong-

I notice when there are wide shots on the screen and the picture is movie, it sometimes looks Jumpy and not smooth. Is this normal?

I also noticed when watching Narnia, that there was some Flickering especially in some of the brighter scenes....

Are there some settings or something that would help this?

Thanks for any help.

Entertainment72 · 05-23-2008, 04:45 PM

What are your motionflow settings?

Hendunesia · 05-23-2008, 04:54 PM

Not sure: I dont think I changed them from the default.....

How is your KDS set?

Im at work right now so I will check the settings tonight.

drago3451 · 05-23-2008, 04:54 PM

has to be the motionflow settings.

aqupunk · 05-23-2008, 04:58 PM

Quote:

Originally Posted by drago3451

has to be the motionflow settings.

I have the kds 60a3000 and I to saw artifacts so after lots of experimenting i found keeping all the settings off even the 24 frames per sec setting.

I haven't turned the motion flow back on to standard but might give another try anyone got any feedback?

drago3451 · 05-23-2008, 04:59 PM

I have motionflow set to standard and my player set to 1080/24p and it seems to work smoothly. if you are still having problems try turning the motionflow off all together and see where that gets you. This is what they recommend in the manual but I have not had a problem so I leave it on..

Bluyah1080 · 12-15-2008, 05:56 AM

[QUOTE=aqupunk;904126]I have the kds 60a3000 and I to saw artifacts so after lots of experimenting i found keeping all the settings off even the 24 frames per sec setting.

I haven't turned the motion flow back on to standard but might give another try anyone got any feedback?[/QUOT

turn off motion flow, cinemotion, and especially motion enhancer. put set to accept 1080/24 feed. put ps3, bluray player to feed 1080/24. motion enhancer creates extra frames (interpolates=guesses). when off tv does 4:4 pulldown @ 96hz. these are settings for bluray.

05-23-2008, 04:34 PM	#1
Hendunesia Member Member since:May 2008	Help w/ Sony KDS 55A-3000 Blu-Ray picture issues: I have a Sony SXRD Projection 1080p HDTV running BLU from a PS3 with HDMI cables. For the first few weeks I was in just Awe of Blu Movies and and my 55" TV... but now that I am really analyzing the Picture; I notice a few things I think are wrong- I notice when there are wide shots on the screen and the picture is movie, it sometimes looks Jumpy and not smooth. Is this normal? I also noticed when watching Narnia, that there was some Flickering especially in some of the brighter scenes.... Are there some settings or something that would help this? Thanks for any help.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
philips 47 inch 120 htz series 3000 issues	LCD TVs	justinbaily	0	03-15-2010 10:40 PM
Sony KDS XXA3000	Rear Projection TVs	zoso0928	3	01-07-2010 05:32 PM
In terms of picture quality what's your best Blu-ray movie picture for picture	Blu-ray Movies - North America	Stiny-Ray2	2	03-11-2008 04:38 PM
Is Sony still making the KDS-Z70XBR5?? KDS-Z60XBR5?	Home Theater General Discussion	POTC123	1	12-16-2007 09:43 PM
Picture issues with blu-ray movies	Newbie Discussion	dimebag	11	10-29-2007 02:13 AM

05-23-2008, 04:45 PM	#2
Entertainment72 Special Member Member since:Jan 2008 Location:Fort Myers, FL Blu-ray collection:44 Blu-ray reviews:1	What are your motionflow settings?

05-23-2008, 04:54 PM	#3
Hendunesia Member Member since:May 2008	Not sure: I dont think I changed them from the default..... How is your KDS set? Im at work right now so I will check the settings tonight.

05-23-2008, 04:54 PM	#4
drago3451 Senior Member Top contributor Member since:Mar 2008 Home Theater Gallery:12 4K collection:3 Blu-ray collection:426 Blu-ray reviews:1	has to be the motionflow settings.

05-23-2008, 04:59 PM	#6
drago3451 Senior Member Top contributor Member since:Mar 2008 Home Theater Gallery:12 4K collection:3 Blu-ray collection:426 Blu-ray reviews:1	I have motionflow set to standard and my player set to 1080/24p and it seems to work smoothly. if you are still having problems try turning the motionflow off all together and see where that gets you. This is what they recommend in the manual but I have not had a problem so I leave it on..

12-15-2008, 05:56 AM	#7
Bluyah1080 Junior Member Member since:Feb 2008	[QUOTE=aqupunk;904126]I have the kds 60a3000 and I to saw artifacts so after lots of experimenting i found keeping all the settings off even the 24 frames per sec setting. I haven't turned the motion flow back on to standard but might give another try anyone got any feedback?[/QUOT turn off motion flow, cinemotion, and especially motion enhancer. put set to accept 1080/24 feed. put ps3, bluray player to feed 1080/24. motion enhancer creates extra frames (interpolates=guesses). when off tv does 4:4 pulldown @ 96hz. these are settings for bluray.

Best Blu-ray Movie Deals