pioneer vsx 1019 ah-k HELP! - Blu-ray Forum

trevtrbo · 07-04-2009, 04:35 PM

ok so I just bought this reciever and can get it to output all high res audio formats except pcm. when I tried to play Cars which is a pcm disc, no audio will come through unless i set the reciever to plII. any help will be appreciated. I have a panasonic bd80 if that helps, all hooked up through hdmi.

PS3-Playb3yond · 07-04-2009, 05:20 PM

Not really an expert on this but, do you have your Panasonic set to bitsream?

callas01 · 07-04-2009, 06:26 PM

Make sure that in the audio setup you have the DDTHD and DTSHD set to BITSTREAM, below that the SECONDARY AUDIO OUTPUT to OFF. On the receiver set it to Stream Direct/Auto Surround.

If that doesn't help then you may need to check what your surround decoding priorities are..(at least this is a feature I know Sony has) I would think there is something similar that allow for how audio is processed.

You may want to consult your recievers manual too if that doesn't help.

trevtrbo · 07-04-2009, 07:35 PM

ill give the auto surround a try. i had it set to pcm direct i think. and the manual is like reading the bible, it makes little sense.

callas01 · 07-05-2009, 06:29 AM

Quote:

Originally Posted by trevtrbo

ill give the auto surround a try. i had it set to pcm direct i think. and the manual is like reading the bible, it makes little sense.

Then try praying before you read it...

trevtrbo · 07-06-2009, 12:48 AM

no need to, stream direst worked, now it reads pcm direct when pcm titles are played. callas be praised...haha

callas01 · 07-06-2009, 04:21 AM

Quote:

Originally Posted by trevtrbo

no need to, stream direst worked, now it reads pcm direct when pcm titles are played. callas be praised...haha

Glad I could help. now pray before you read the other manual, see if that helps.

blarneyrubble · 07-06-2009, 12:30 PM

I have been looking at that receiver. After you get it all set can you give a little review. I am most interested in knowing if you are running 7.1 and will the receiver simulate the sixth and seventh speaker when playing a Dolby TrueHD 5.1 track or DTS-HD 5.1 track.

Thanks.

Newmason · 07-06-2009, 12:50 PM

Apply the direct stream for everything you have plugged into the receiver. Will make life easier!

and the auto detect function works great as well. Hit the receiver button on the bottom of the remote and then the ALC/surround button maybe 3 or 4 rows up on the left, on the remote

DoomBot · 07-29-2009, 08:33 PM

Quote:

Originally Posted by blarneyrubble

I have been looking at that receiver. After you get it all set can you give a little review. I am most interested in knowing if you are running 7.1 and will the receiver simulate the sixth and seventh speaker when playing a Dolby TrueHD 5.1 track or DTS-HD 5.1 track.

Thanks.

Well so far with my 6.1 setup the back surround works with all 5.1 audio except DTS-HD Master and PCM 5.1 tracks, i hear 5.1 and not 6.1 and im not sure why.

07-04-2009, 04:35 PM	#1
trevtrbo Member Member since:Feb 2008 Home Theater Gallery:2 Blu-ray collection:98	pioneer vsx 1019 ah-k HELP! ok so I just bought this reciever and can get it to output all high res audio formats except pcm. when I tried to play Cars which is a pcm disc, no audio will come through unless i set the reciever to plII. any help will be appreciated. I have a panasonic bd80 if that helps, all hooked up through hdmi.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Question for Pioneer VSX 819 and 1019 owners	Receivers	Clippins	2	11-09-2009 09:09 AM
Pioneer VSX-1019 .. no 7.1 or HD codecs..	Receivers	statikcat	6	09-18-2009 05:20 AM
Pioneer vsx 03 & Pioneer 1019 Pre-Out's ?	Receivers	zodiak	5	06-27-2009 02:06 PM
Pioneer vsx 1019 vs pioneer vsx 03(pro's/cons)	Receivers	zodiak	1	06-19-2009 11:48 PM
Difference between the Pioneer VSX-1018 and Upcoming VSX-1019	Receivers	Siri	45	03-04-2009 10:25 AM

07-04-2009, 05:20 PM	#2
PS3-Playb3yond Blu-ray Ninja Member since:Dec 2007 Location:Cincinnati, OH Blu-ray collection:19 Blu-ray reviews:5 Trading Score:13	Not really an expert on this but, do you have your Panasonic set to bitsream?

07-04-2009, 06:26 PM	#3
callas01 Blu-ray Prince Top contributor Member since:Jun 2008 Location:Riverside, CA Home Theater Gallery:42 Blu-ray collection:230 DVD collection:47	Make sure that in the audio setup you have the DDTHD and DTSHD set to BITSTREAM, below that the SECONDARY AUDIO OUTPUT to OFF. On the receiver set it to Stream Direct/Auto Surround. If that doesn't help then you may need to check what your surround decoding priorities are..(at least this is a feature I know Sony has) I would think there is something similar that allow for how audio is processed. You may want to consult your recievers manual too if that doesn't help.

07-04-2009, 07:35 PM	#4
trevtrbo Member Member since:Feb 2008 Home Theater Gallery:2 Blu-ray collection:98	ill give the auto surround a try. i had it set to pcm direct i think. and the manual is like reading the bible, it makes little sense.

07-06-2009, 12:48 AM	#6
trevtrbo Member Member since:Feb 2008 Home Theater Gallery:2 Blu-ray collection:98	no need to, stream direst worked, now it reads pcm direct when pcm titles are played. callas be praised...haha

07-06-2009, 12:30 PM	#8
blarneyrubble Active Member Member since:Apr 2009 Location:Greenville Blu-ray collection:186	I have been looking at that receiver. After you get it all set can you give a little review. I am most interested in knowing if you are running 7.1 and will the receiver simulate the sixth and seventh speaker when playing a Dolby TrueHD 5.1 track or DTS-HD 5.1 track. Thanks.

07-06-2009, 12:50 PM	#9
Newmason Active Member Member since:May 2009 Location:Member of the "ECPP" Blu-ray collection:21	Apply the direct stream for everything you have plugged into the receiver. Will make life easier! and the auto detect function works great as well. Hit the receiver button on the bottom of the remote and then the ALC/surround button maybe 3 or 4 rows up on the left, on the remote

Best Blu-ray Movie Deals