Auto Calibrating harman/kardon 1600 AVR - Blu-ray Forum

InTheBox · 11-19-2009, 11:26 AM

I just bought my new harman/kardon 1600 AVR and the wrong auto calibrating mick was in it. The owners guide says there is a manual setup. But you need to know what speakers crossover frequencies are. My speakers don't have that info on them and i don't have a owners book for them. They are pioneer 9-htd510 speakers and there a least 6 years old. I do have the watts for each speaker.
center 34w
fronts 100w
rears 33w
Thanks for any info.

Big Daddy · 11-19-2009, 10:37 PM

This information is from Crutchfield on Pioneer HTD-510DV speakers.

Subwoofer:
Frequency Range: 30Hz to 2kHz
Maximum Input: 100 watts
Weight: 10 lbs. 9 oz.

Front Speakers:
Frequency Range: 50Hz to 20kHz
Maximum Input: 100 watts
Weight: 4 lbs. 7 oz.

Center Speaker:
Frequency Range: 80Hz to 20kHz
Maximum Input: 34 watts
Weight: 4 lbs.

Rear Speakers:
Frequency Range: 120Hz to 20kHz
Maximum Input: 33 watts
Weight: 1 lbs. 12 oz.

Set the crossovers to at least 10Hz above the minimum low frequency extension of the speakers. For example, set a crossover of 60Hz to 80Hz for the front speakers.

Read A Guide to Bass Management and Calibrating Your Audio with an SPL Meter to manually calibrate your speakers.

11-19-2009, 11:26 AM	#1
InTheBox Junior Member Member since:Jun 2008	Auto Calibrating harman/kardon 1600 AVR I just bought my new harman/kardon 1600 AVR and the wrong auto calibrating mick was in it. The owners guide says there is a manual setup. But you need to know what speakers crossover frequencies are. My speakers don't have that info on them and i don't have a owners book for them. They are pioneer 9-htd510 speakers and there a least 6 years old. I do have the watts for each speaker. center 34w fronts 100w rears 33w Thanks for any info.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Harman Kardon AVR 254	Receivers	zoso0928	14	06-06-2010 05:43 AM
Harman Kardon avr 254. 7.1	Receivers	zoso0928	4	03-11-2010 05:27 AM
The Harman Kardon AVR 1600	Receivers	InTheBox	5	11-11-2009 09:11 PM
Harman Kardon HK AVR 254?	Receivers	canative454	11	10-09-2009 03:48 PM
Harman Kardon AVR 347	Home Theater General Discussion	walk on the blu side	8	04-11-2008 04:33 AM

11-19-2009, 10:37 PM	#2
Big Daddy Blu-ray Champion Top ranked HT gallery Member since:Jan 2008 Location:Southern California Home Theater Gallery:79 Blu-ray collection:122 Trading Score:1	This information is from Crutchfield on Pioneer HTD-510DV speakers. Subwoofer: Frequency Range: 30Hz to 2kHz Maximum Input: 100 watts Weight: 10 lbs. 9 oz. Front Speakers: Frequency Range: 50Hz to 20kHz Maximum Input: 100 watts Weight: 4 lbs. 7 oz. Center Speaker: Frequency Range: 80Hz to 20kHz Maximum Input: 34 watts Weight: 4 lbs. Rear Speakers: Frequency Range: 120Hz to 20kHz Maximum Input: 33 watts Weight: 1 lbs. 12 oz. Set the crossovers to at least 10Hz above the minimum low frequency extension of the speakers. For example, set a crossover of 60Hz to 80Hz for the front speakers. Read A Guide to Bass Management and Calibrating Your Audio with an SPL Meter to manually calibrate your speakers.

Best Blu-ray Movie Deals