No signal from PS3 To Onkyo 605 Help ! - Blu-ray Forum

ale8kid · 08-03-2008, 12:11 PM

I just purchased a Onkyo TX-SR605B from ECost . I hooked it up Via HDMI. I hooked up the HDMI cable to the PS3 To input one on the Onkyo and then hooked up the Onkyo to the tv from the HDMI out of the receiver. The settings are for the game/tv from HDMI 1 on the Onkyo. I can see the on screen display from the receiver when I go to the menu on the tv . So I assume that means I'm getting a signal from the Onkyo to the tv . When I turn on the ps3 I get nothing . I check the display on the Onkyo and it says no signal . I can then hook up the PS3 directly to the tv Via HDMI and have a perfect picture and sound . So I know there is a signal coming from the PS3 . The PS3 was previously hooked up to the tv before I got the Onkyo. The Tv Is a Hitachi 1080i so the PS3 when first hooked up to the tv set its self to 1080i output. Is there a setting on the PS3 that is wrong so that the Onkyo doesn't recognize it maybe . Any help would be greatly appreciated.

crazy25000 · 08-03-2008, 12:23 PM

I have the 605, go to the receivers settings and make sure HDMI Output is turned on.

ale8kid · 08-03-2008, 12:33 PM

Thanks but I do have it turned on . I think there is something wrong with the reciever. I double a triple check all the settings on the reciever and cant find anything wrong.

mastertang · 08-03-2008, 12:36 PM

Also, as long as your receiver is set up to route the HDMI correctly as mentioned above, I'd try a system reset. I think you hold the power switch (keep your finger on the panel) for five or ten seconds and it beeps a second time or something. You will have to set your video and audio up as if it was the first time you turned it on (but all your saved stuff is still on the HD). Your ps3 was likely only set to output pcm 2.0 via HDMI to your TV. Good Luck!

It could be the receiver though. They aren't without lemons, though my brothers works well I've certainly read alot here about people that have random failures of the 605s.

ale8kid · 08-03-2008, 12:40 PM

Thanks I will try that .

crazy25000 · 08-03-2008, 12:43 PM

Quote:

Originally Posted by ale8kid

Thanks I will try that .

I was going to recommend resetting it too, hold down VCR and then push standby

crackinhedz · 08-03-2008, 01:27 PM

so you have these settings already?

HDMI Monitor = Yes

HDMI Audio Out = No

ale8kid · 08-03-2008, 01:40 PM

Yes I have those settings the monitor is turned to yes .

crackinhedz · 08-03-2008, 02:25 PM

perhaps try and see if "HDMI 2" works on the receiver?

Driver_King · 08-03-2008, 04:27 PM

Do you have the HDMI settings correct on the PS3?

ale8kid · 08-03-2008, 07:53 PM

I'm not sure if I have the right setting on the PS3 thats the only other thing I can think of . Any suggestions?

ale8kid · 08-03-2008, 07:54 PM

also I barrowed my dads hd dvd player to try it as well . I'll let you know if I get anything through it . Thanks for the replies .

ale8kid · 08-03-2008, 09:04 PM

I tried the Hd dvd player via HDMI and got a blue screen which is more than I got from the PS3. Could it have anything to do with my TV being 1080i ?

un4gvn94538 · 08-03-2008, 09:16 PM

Quote:

Originally Posted by ale8kid

I tried the Hd dvd player via HDMI and got a blue screen which is more than I got from the PS3. Could it have anything to do with my TV being 1080i ?

no, my tv is 1080i and get a fine pic with ps3 and hd dvd. since my tv doesnt display 720, all i have checked is 480 and 1080i. if you tried the reciever reset like mentioned above and it still doesnt work, then its probably the receiver.

and you double checked the hdmi cable is in all the way?

obiwopkenobi62 · 08-03-2008, 10:13 PM

Quote:

Originally Posted by Driver_King

Do you have the HDMI settings correct on the PS3?

I was thinking the same thing I have the 605 too. You have to make sure your PS3 settings are correct. Make sure you have HDMI out/Linear PCM. I can't remember all the settings but when I got my 605 I didn't have the PS3 settings right because I had been using Toslink for my old receiver. I wasn't getting signal or sound out of the 605. When I changed the settings on the PS3, everything worked fine. Also don't forget about setting up you speakers with the microphone.

quexos · 08-04-2008, 04:15 AM

Worst case scenario, the receiver is not working properly and it should be covered by the guarantee.

ale8kid · 08-06-2008, 11:39 PM

Thanks for all the help . I sent the unit back . I called Onkyo and they confirmed a bad unit . I'm thinking of going with the 606 .

08-03-2008, 12:11 PM	#1
ale8kid Junior Member Member since:Aug 2008	No signal from PS3 To Onkyo 605 Help ! I just purchased a Onkyo TX-SR605B from ECost . I hooked it up Via HDMI. I hooked up the HDMI cable to the PS3 To input one on the Onkyo and then hooked up the Onkyo to the tv from the HDMI out of the receiver. The settings are for the game/tv from HDMI 1 on the Onkyo. I can see the on screen display from the receiver when I go to the menu on the tv . So I assume that means I'm getting a signal from the Onkyo to the tv . When I turn on the ps3 I get nothing . I check the display on the Onkyo and it says no signal . I can then hook up the PS3 directly to the tv Via HDMI and have a perfect picture and sound . So I know there is a signal coming from the PS3 . The PS3 was previously hooked up to the tv before I got the Onkyo. The Tv Is a Hitachi 1080i so the PS3 when first hooked up to the tv set its self to 1080i output. Is there a setting on the PS3 that is wrong so that the Onkyo doesn't recognize it maybe . Any help would be greatly appreciated.

08-03-2008, 12:36 PM	#4
mastertang Active Member Member since:May 2007 Blu-ray collection:62 Blu-ray reviews: 3	Also, as long as your receiver is set up to route the HDMI correctly as mentioned above, I'd try a system reset. I think you hold the power switch (keep your finger on the panel) for five or ten seconds and it beeps a second time or something. You will have to set your video and audio up as if it was the first time you turned it on (but all your saved stuff is still on the HD). Your ps3 was likely only set to output pcm 2.0 via HDMI to your TV. Good Luck! It could be the receiver though. They aren't without lemons, though my brothers works well I've certainly read alot here about people that have random failures of the 605s. Last edited by mastertang; 08-03-2008 at 12:39 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo 605 + PS3	Receivers	bpcfan	1	09-23-2008 12:38 AM
Signal Drops with PS3 and Onkyo 605	Audio Theory and Discussion	jbragg89	8	05-13-2008 10:46 PM
Onkyo 605 And Ps3!	Receivers	HOME THEATRE ADDICT!	8	05-05-2008 12:06 PM
onkyo 605 and PS3 FW 2.30	Home Theater General Discussion	mercury187	5	04-11-2008 03:41 PM
ps3 and onkyo 605	Home Theater General Discussion	cembros	14	02-05-2008 11:57 PM

08-03-2008, 12:23 PM	#2
crazy25000 Active Member Member since:Nov 2007 Blu-ray reviews:3 Trading Score:16	I have the 605, go to the receivers settings and make sure HDMI Output is turned on.

08-03-2008, 12:33 PM	#3
ale8kid Junior Member Member since:Aug 2008	Thanks but I do have it turned on . I think there is something wrong with the reciever. I double a triple check all the settings on the reciever and cant find anything wrong.

08-03-2008, 12:40 PM	#5
ale8kid Junior Member Member since:Aug 2008	Thanks I will try that .

08-03-2008, 01:27 PM	#7
crackinhedz Super Moderator Member since:Feb 2007 Home Theater Gallery:10 Blu-ray reviews:8 Trading Score:19	so you have these settings already? HDMI Monitor = Yes HDMI Audio Out = No

08-03-2008, 01:40 PM	#8
ale8kid Junior Member Member since:Aug 2008	Yes I have those settings the monitor is turned to yes .

08-03-2008, 02:25 PM	#9
crackinhedz Super Moderator Member since:Feb 2007 Home Theater Gallery:10 Blu-ray reviews:8 Trading Score:19	perhaps try and see if "HDMI 2" works on the receiver?

08-03-2008, 04:27 PM	#10
Driver_King Blu-ray Ninja Top contributor Member since:Jan 2008 Location:Tampa Bay, Florida Home Theater Gallery:96 Blu-ray collection:28 Trading Score:10	Do you have the HDMI settings correct on the PS3?

08-03-2008, 07:53 PM	#11
ale8kid Junior Member Member since:Aug 2008	I'm not sure if I have the right setting on the PS3 thats the only other thing I can think of . Any suggestions?

08-03-2008, 07:54 PM	#12
ale8kid Junior Member Member since:Aug 2008	also I barrowed my dads hd dvd player to try it as well . I'll let you know if I get anything through it . Thanks for the replies .

08-03-2008, 09:04 PM	#13
ale8kid Junior Member Member since:Aug 2008	I tried the Hd dvd player via HDMI and got a blue screen which is more than I got from the PS3. Could it have anything to do with my TV being 1080i ?

08-04-2008, 04:15 AM	#16
quexos Banned Member since:May 2007 Location:Brussels, Belgium	Worst case scenario, the receiver is not working properly and it should be covered by the guarantee.

08-06-2008, 11:39 PM	#17
ale8kid Junior Member Member since:Aug 2008	Thanks for all the help . I sent the unit back . I called Onkyo and they confirmed a bad unit . I'm thinking of going with the 606 .

Best Blu-ray Movie Deals