BD-P1400 issues after Update? - Blu-ray Forum

tdiguy · 10-04-2008, 01:40 AM

So my samsung bd-p1400 has been awesome for a year now since i bought it now i have a problem. I bought the new iron man on blu ray...threw it in the player and let her go...it tried to boot and kept freezing up...so tried old blu ray and it worked fine...so i got the network cable and said time to update i guess. So after the update i threw the iron man back in and bam it works...only glitched 2 small times for some reason throught the movie. So i shut it down for the night and went to bed...next night i threw in season 2 of house and booted it up and now i have no sound output. Its not the dvd it worked before..the cables are fine as well...so what do i do. One plus i guess now is the update seemed to have fixed the slow eject the p1400 has had since new now it opens almost soon as you press the button...use to take 3-5 mins.

Any ideas as to what to do would be greatly appreciated thanks.

badboi · 10-04-2008, 01:49 AM

Check you settings. Every time I updated my Samsung it would revert back to factory settings and I would always have to change them back to what I set them at. It messes with the audio output, video output and a few other things.

tdiguy · 10-04-2008, 01:52 AM

Yah i tried that and the settings did not have any effects...thanks tho..maybe ill try reupdating im not sure whats going on.

badboi · 10-04-2008, 01:58 AM

Are you using HDMI for audio and video? If so unplug it and plug it back in wherever you have it connected.

tdiguy · 10-04-2008, 02:00 AM

Yep monster cable hdmi...so unplug it while its on or off...from the bd player or my reciver

badboi · 10-04-2008, 02:02 AM

Unplug it while everything is off. From both receiver and player. Then restart everything.

tdiguy · 10-04-2008, 02:09 AM

Okay thank you ill go try that now thanks...also i read that if you are behind on updates it only does one at a time via the internet is this true...someone said theres four out for the bd-p1400 and this is my second time updating it...is this my issue.

tdiguy · 10-04-2008, 02:18 AM

Thank you badboi...as it turns out it was the settings...after looking it looks as it reset the language setting and all i had to do was set it to english and bam all better...thanks alot man i owe yah.

badboi · 10-04-2008, 02:21 AM

Glad to help. Now go enjoy your movies.

As far as updates, usually the latest update incorporates everything from previous updates. So if you download 1.8 (or whatever), it will include everything previous to that.

DAT27 · 10-04-2008, 01:31 PM

After the firmware update, the system power off automatically.. When you turn on the power first time after firmware update, the first screen comes is language selection. You will have hit "1" to select English..If you miss then you will have to go to settings to set the language.

I updated my P1400 yesterday to firmware 1.9 and now Iron Man BD discs plays flawlessly...

dbryantphoto · 11-15-2008, 02:50 AM

i'm having issues too with the bdp1400 and iron man. this is the first time a blurray disc did not play for me. i tried the update last night with ethernet cable. didn't seem to fix the problem. figure i'll try it again and hopefully i can play the disc. not sure if the update actually worked. seemed like it did. can't think of what else i could do. when i check my firmware update it says that i have version:

S/W 080808.02_XAA
Region A/01 (DB/DVD)

the first time i did the update, the power turned off on the player but it never went to the screen what asked me to select the language. i checked it and it still said english. that's what made me think that the update never took.

can anyone think of anything else that might be the problem for me?

dbryantphoto · 11-15-2008, 04:34 AM

seems like the update worked. i also changed the language to english manually but like before the screen that was supposed to come up never did. i had to manually go to that menu and select the language. but, seems like all worked out. glad i read this thread

10-04-2008, 01:40 AM	#1
tdiguy Junior Member Member since:Oct 2008	BD-P1400 issues after Update? So my samsung bd-p1400 has been awesome for a year now since i bought it now i have a problem. I bought the new iron man on blu ray...threw it in the player and let her go...it tried to boot and kept freezing up...so tried old blu ray and it worked fine...so i got the network cable and said time to update i guess. So after the update i threw the iron man back in and bam it works...only glitched 2 small times for some reason throught the movie. So i shut it down for the night and went to bed...next night i threw in season 2 of house and booted it up and now i have no sound output. Its not the dvd it worked before..the cables are fine as well...so what do i do. One plus i guess now is the update seemed to have fixed the slow eject the p1400 has had since new now it opens almost soon as you press the button...use to take 3-5 mins. Any ideas as to what to do would be greatly appreciated thanks.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
samsung bd-p1400 fireware issues movies not playing	Newbie Discussion	atwistedclown2003	2	10-13-2009 06:37 PM
BD-P1400 frimware update problem	Blu-ray Players and Recorders	johnchart	7	05-11-2008 04:27 PM
PS3 2.20 Update issues	Blu-ray Technology and Future Technology	bignickdawg	45	03-26-2008 08:13 PM
Ratatouille playback on Samsung BD-P1400 (update)	Blu-ray Players and Recorders	moorejd	4	12-13-2007 12:54 AM
Site still has issues after update	Feedback Forum	CptGreedle	57	09-29-2007 05:36 PM

10-04-2008, 01:49 AM	#2
badboi Special Member Member since:Sep 2007 Location:Atlanta	Check you settings. Every time I updated my Samsung it would revert back to factory settings and I would always have to change them back to what I set them at. It messes with the audio output, video output and a few other things.

10-04-2008, 01:52 AM	#3
tdiguy Junior Member Member since:Oct 2008	Yah i tried that and the settings did not have any effects...thanks tho..maybe ill try reupdating im not sure whats going on.

10-04-2008, 01:58 AM	#4
badboi Special Member Member since:Sep 2007 Location:Atlanta	Are you using HDMI for audio and video? If so unplug it and plug it back in wherever you have it connected.

10-04-2008, 02:00 AM	#5
tdiguy Junior Member Member since:Oct 2008	Yep monster cable hdmi...so unplug it while its on or off...from the bd player or my reciver

10-04-2008, 02:02 AM	#6
badboi Special Member Member since:Sep 2007 Location:Atlanta	Unplug it while everything is off. From both receiver and player. Then restart everything.

10-04-2008, 02:09 AM	#7
tdiguy Junior Member Member since:Oct 2008	Okay thank you ill go try that now thanks...also i read that if you are behind on updates it only does one at a time via the internet is this true...someone said theres four out for the bd-p1400 and this is my second time updating it...is this my issue.

10-04-2008, 02:18 AM	#8
tdiguy Junior Member Member since:Oct 2008	Thank you badboi...as it turns out it was the settings...after looking it looks as it reset the language setting and all i had to do was set it to english and bam all better...thanks alot man i owe yah.

10-04-2008, 02:21 AM	#9
badboi Special Member Member since:Sep 2007 Location:Atlanta	Glad to help. Now go enjoy your movies. As far as updates, usually the latest update incorporates everything from previous updates. So if you download 1.8 (or whatever), it will include everything previous to that.

10-04-2008, 01:31 PM	#10
DAT27 Senior Member Member since:Jan 2008 4K collection:197 Blu-ray collection:781 Blu-ray reviews:1 Trading Score:11	After the firmware update, the system power off automatically.. When you turn on the power first time after firmware update, the first screen comes is language selection. You will have hit "1" to select English..If you miss then you will have to go to settings to set the language. I updated my P1400 yesterday to firmware 1.9 and now Iron Man BD discs plays flawlessly...

11-15-2008, 02:50 AM	#11
dbryantphoto New Member Member since:Nov 2008	i'm having issues too with the bdp1400 and iron man. this is the first time a blurray disc did not play for me. i tried the update last night with ethernet cable. didn't seem to fix the problem. figure i'll try it again and hopefully i can play the disc. not sure if the update actually worked. seemed like it did. can't think of what else i could do. when i check my firmware update it says that i have version: S/W 080808.02_XAA Region A/01 (DB/DVD) the first time i did the update, the power turned off on the player but it never went to the screen what asked me to select the language. i checked it and it still said english. that's what made me think that the update never took. can anyone think of anything else that might be the problem for me?

11-15-2008, 04:34 AM	#12
dbryantphoto New Member Member since:Nov 2008	seems like the update worked. i also changed the language to english manually but like before the screen that was supposed to come up never did. i had to manually go to that menu and select the language. but, seems like all worked out. glad i read this thread

Best Blu-ray Movie Deals