onkyo 606 wont give me hd audio. - Blu-ray Forum

derek s · 02-12-2009, 11:49 PM

I just got a blueray player and rented some movies that have HD master audio and true HD. I cant get the 606 to go to that setting. It stays on D Digital EX. I must have a setting screwed up but i cant find it. Can somone pleas help .

Beta Man · 02-12-2009, 11:56 PM

some movies default to that..... go into the language/audio menu on the blu-ray you're trying to play, and make sure you select the HD-MA etc. audio.

What player, what movies?

derek s · 02-13-2009, 12:04 AM

I have a somsung bd-p1500 connected whith hdmi and the movies were Planet of the apes and Alians vs predator. I also went into the audio settings on the dvd and set them

ak808 · 02-13-2009, 12:12 AM

^^thats your problem right there!!! DVD doesn't have HD audio

...All kidding aside make sure your player is sending the audio as bitstream. Then maybe go into your reciever menu and make sure the audio is set to hdmi as well. Other then that I'm not to sure.

derek s · 02-13-2009, 12:30 AM

Both dvds say that thay have HD master audio and true HD. I had to look for a bit to find a disc that had HD audio.

brett_day · 02-13-2009, 02:35 AM

Quote:

Originally Posted by derek s

Both dvds say that thay have HD master audio and true HD. I had to look for a bit to find a disc that had HD audio.

his point was that you are watching Blu rays that have HD audio....DVD's do not!

phansson · 02-13-2009, 04:23 AM

My Integra 9.8 doesn't display the HD codec all of the time. If you are getting a TrueHD/DTS HD MA soundtrack, there are some small logos on the front that show what bitstream you are receiving. I have a 7.1 system, so for high resolution audio 5.1 tracks, I have to overlay another listening mode over the HD audio to get 7.1 sound for my setup (and the main display shows DPL IIx or THX ultra 2, it is still TrueHD/DTS HD MA)

Bottom line, make sure your using an HDMI connection.
Set 1500 to bitstream.
Make sure that the receiver is set to amp and not pass through(if applicable).

brett_day · 02-12-2009, 11:58 PM

how are you connected from the player to the receiver? You must be connected via HDMI for starters. If you have a standalone player, set the player to output in bitstream, the receiver will show the hd audio codec on the display

if you have a ps3 then you need to select linear PCM, the receiver will show multi channel but you will be getting the hd codecs. Also make sure you choose the HD audio option from the movies menu

02-12-2009, 11:49 PM	#1
derek s New Member Member since:Feb 2009	onkyo 606 wont give me hd audio. I just got a blueray player and rented some movies that have HD master audio and true HD. I cant get the 606 to go to that setting. It stays on D Digital EX. I must have a setting screwed up but i cant find it. Can somone pleas help .

02-13-2009, 12:04 AM	#3
derek s New Member Member since:Feb 2009	I have a somsung bd-p1500 connected whith hdmi and the movies were Planet of the apes and Alians vs predator. I also went into the audio settings on the dvd and set them Last edited by derek s; 02-13-2009 at 02:26 AM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo 606 and Secondary Audio	Receivers	Bdogg	4	04-19-2011 03:52 PM
Onkyo 606 No video through HDMI, Audio is there though.	Receivers	stfn	13	02-26-2010 03:20 PM
Onkyo 606 audio settings help!	Receivers	Automission	14	02-04-2009 07:24 AM
onkyo 606 and ps3 audio question	Receivers	vonzar	9	01-20-2009 04:02 PM
Onkyo 606 and DTS-HD Master Audio question	Receivers	DAT27	2	12-02-2008 02:01 AM

02-12-2009, 11:56 PM	#2
Beta Man Moderator Top contributor Member since:Jan 2008 Location:Juuuuuuuust A Bit Outside.... Home Theater Gallery:4 Blu-ray collection:268 Blu-ray reviews: 18 Trading Score:25	some movies default to that..... go into the language/audio menu on the blu-ray you're trying to play, and make sure you select the HD-MA etc. audio. What player, what movies?

02-13-2009, 12:12 AM	#4
ak808 Active Member Member since:Nov 2007 Home Theater Gallery:17 Blu-ray collection:342	^^thats your problem right there!!! DVD doesn't have HD audio ...All kidding aside make sure your player is sending the audio as bitstream. Then maybe go into your reciever menu and make sure the audio is set to hdmi as well. Other then that I'm not to sure.

02-13-2009, 12:30 AM	#5
derek s New Member Member since:Feb 2009	Both dvds say that thay have HD master audio and true HD. I had to look for a bit to find a disc that had HD audio.

02-13-2009, 04:23 AM	#7
phansson Blu-ray Ninja Top contributor Member since:Nov 2007 Location:Arkansas Home Theater Gallery:22 Blu-ray collection:643 Blu-ray reviews:1	My Integra 9.8 doesn't display the HD codec all of the time. If you are getting a TrueHD/DTS HD MA soundtrack, there are some small logos on the front that show what bitstream you are receiving. I have a 7.1 system, so for high resolution audio 5.1 tracks, I have to overlay another listening mode over the HD audio to get 7.1 sound for my setup (and the main display shows DPL IIx or THX ultra 2, it is still TrueHD/DTS HD MA) Bottom line, make sure your using an HDMI connection. Set 1500 to bitstream. Make sure that the receiver is set to amp and not pass through(if applicable).

02-12-2009, 11:58 PM	#8
brett_day Blu-ray Guru Member since:Mar 2008 Location:Moore, Oklahoma Home Theater Gallery:18 Blu-ray collection:45 Blu-ray reviews:1 Trading Score:1	how are you connected from the player to the receiver? You must be connected via HDMI for starters. If you have a standalone player, set the player to output in bitstream, the receiver will show the hd audio codec on the display if you have a ps3 then you need to select linear PCM, the receiver will show multi channel but you will be getting the hd codecs. Also make sure you choose the HD audio option from the movies menu

Best Blu-ray Movie Deals