Help with crossover settings (onkyo 605) - Blu-ray Forum

sinister184 · 03-15-2009, 08:37 AM

im a total noob when it comes to the more technical stuff here, i usually just run the auto setups, but ive been reading up on people who have similar speakers to me and the 605 and people recommend taking the main speakers off "full band" so its less load on the amp and send the lower end to the sub. So i need a little help setting this up properly. when adjusting these do you have to keep the speakers frequency response in mind? the current setup i have now is

Subwoofer = Yes
Front = 60 hz
Center = 80hz
Surround = 80hz
LPF of LFE = 120Hz
Double Bass = off

im using RTi10 mains- 20 Hz - 27000 kHz
monitor 30 rears- 63 to 24000 Hz
Paradigm cc-70 center- "100hz to 20hz"

Big Daddy · 03-15-2009, 11:01 AM

Quote:

Originally Posted by sinister184

im a total noob when it comes to the more technical stuff here, i usually just run the auto setups, but ive been reading up on people who have similar speakers to me and the 605 and people recommend taking the main speakers off "full band" so its less load on the amp and send the lower end to the sub. So i need a little help setting this up properly. when adjusting these do you have to keep the speakers frequency response in mind? the current setup i have now is

Subwoofer = Yes
Front = 60 hz
Center = 80hz
Surround = 80hz
LPF of LFE = 120Hz
Double Bass = off

im using RTi10 mains- 20 Hz - 27000 kHz
monitor 30 rears- 63 to 24000 Hz
Paradigm cc-70 center- "100hz to 20hz"

The answer to your question is yes. You must take the frequency response of the speakers in mind.

Your front and surrounds crossovers are ok. The LPF crossover of 120Hz is ok too.

You need to set the crossover of the center channel to 100Hz or 120Hz as your center speaker's low frequency response is 100Hz.

On the back of the sub, make sure the crossover is set to its highest point.

sinister184 · 03-15-2009, 04:37 PM

thanks big

03-15-2009, 08:37 AM	#1
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	Help with crossover settings (onkyo 605) im a total noob when it comes to the more technical stuff here, i usually just run the auto setups, but ive been reading up on people who have similar speakers to me and the 605 and people recommend taking the main speakers off "full band" so its less load on the amp and send the lower end to the sub. So i need a little help setting this up properly. when adjusting these do you have to keep the speakers frequency response in mind? the current setup i have now is Subwoofer = Yes Front = 60 hz Center = 80hz Surround = 80hz LPF of LFE = 120Hz Double Bass = off im using RTi10 mains- 20 Hz - 27000 kHz monitor 30 rears- 63 to 24000 Hz Paradigm cc-70 center- "100hz to 20hz" Last edited by sinister184; 03-15-2009 at 09:24 AM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
A Guide to Crossover Networks & Crossover Settings	Subwoofers	Big Daddy	69	12-17-2014 02:19 PM
ONKYO TX-SR606 Crossover settings and questions	Receivers	onehothemi	5	01-09-2009 03:50 AM
Onkyo 605 Speaker Settings	Receivers	popcornninja	3	10-01-2008 01:47 AM
PS3 and onkyo 605 settings	Receivers	indyjonesrelic	20	05-03-2008 05:02 PM
ps3 & onkyo 605 Automatic Settings	Receivers	savage1984	9	04-27-2008 03:58 AM

03-15-2009, 04:37 PM	#3
sinister184 Special Member Member since:Jul 2007 Location:FL, USA Home Theater Gallery:4 4K collection:52 Blu-ray collection:593 Blu-ray reviews:7 Trading Score:17	thanks big

Best iTunes Music Deals