Onkyo TX-NR3007 Receiver Thread - Blu-ray Forum

bigdolf · 05-06-2010, 06:08 PM

Onkyo TX-NR3007

onkyo 3007.jpg

just came in, ordered it from accessories4less....receiver is amazing, just ran through audyssey I'm liking it, will update further

ChadFL · 05-06-2010, 06:25 PM

Quote:

Originally Posted by bigdolf

just came in, ordered it from accessories4less....receiver is amazing, just ran through audyssey I'm liking it, will update further

Keep me updated. I was considering a 3007 for awhile but not really considering it anymore. After all the issues I've had with my 605 model and hearing about other peoples problems with even high-end Onkyo receivers I'm likely buying a Pioneer Elite soon.

B.Hulk · 06-07-2010, 06:19 AM

[QUOTE=ChadFL;3238350]Keep me updated. I was considering a 3007 for a while but not really considering it anymore. After all the issues I've had with my 605 model and hearing about other peoples problems with even high-end Onkyo receivers I'm likely buying a Pioneer Elite soon.[/QUOTE

Hey guy's just joined the thread!
I've had the 3007 since Feb, 2010 and I cant find anything wrong with this
baby! In Dec, of '09 I got the 807

that used Faroudja high-quality video processing. And had some video issues with it(video processing), exchanged it for another 807. Still same problem! so after reading about the 3007 and
"HQV Reon-VX Chip for High-Performance Video Processing" I got some moore cash together and got the 3007!!!

Better Picture Better performance!
Awesome Reciever you wont regret it.
http://www.us.onkyo.com/model.cfm?m=...s=Receiver&p=s

bigdolf · 06-07-2010, 01:20 PM

[QUOTE=B.Hulk;3354615]

Quote:

Originally Posted by ChadFL

Keep me updated. I was considering a 3007 for a while but not really considering it anymore. After all the issues I've had with my 605 model and hearing about other peoples problems with even high-end Onkyo receivers I'm likely buying a Pioneer Elite soon.[/QUOTE

Hey guy's just joined the thread!
I've had the 3007 since Feb, 2010 and I cant find anything wrong with this
baby! In Dec, of '09 I got the 807

that used Faroudja high-quality video processing. And had some video issues with it(video processing), exchanged it for another 807. Still same problem! so after reading about the 3007 and
"HQV Reon-VX Chip for High-Performance Video Processing" I got some moore cash together and got the 3007!!!

Better Picture Better performance!
Awesome Reciever you wont regret it.
http://www.us.onkyo.com/model.cfm?m=...s=Receiver&p=s

yes I def love mine...and I started off by looking at the 807, then decided on the 3007

markbr · 05-06-2010, 06:28 PM

Quote:

Originally Posted by bigdolf

Onkyo TX-NR3007

just came in, ordered it from accessories4less....receiver is amazing, just ran through audyssey I'm liking it, will update further

That looks nice I have the onkyo 606 and I would love that model the blu light around the volume looks awsome.

bigdolf · 05-06-2010, 07:21 PM

I upgraded from the 607, unit came in with the current firmware, and its nuts...me likey....now its time to get new speakers

markbr · 05-06-2010, 07:25 PM

What speakers are you going to get any idea ??

bigdolf · 05-06-2010, 08:19 PM

Quote:

Originally Posted by markbr

What speakers are you going to get any idea ??

I'm leaning towards the kef iq90s and the 1c60 for the center

markbr · 05-06-2010, 08:51 PM

Quote:

Originally Posted by bigdolf

I'm leaning towards the kef iq90s and the 1c60 for the center

Very nice choice good luck with the system then

solarrdadd · 05-06-2010, 10:21 PM

Quote:

Originally Posted by bigdolf

Onkyo TX-NR3007

Attachment 18320

just came in, ordered it from accessories4less....receiver is amazing, just ran through audyssey I'm liking it, will update further

congrats bigdolf! I'm really happy for you. I am sure you will be happy with this unit. please keep us posted and remember, do all you can to keep a handle on your thread. i look forward to hearing what your thoughts are from first day until...

again, congrats my friend!

bigdolf · 05-06-2010, 11:26 PM

Quote:

Originally Posted by solarrdadd

congrats bigdolf! I'm really happy for you. I am sure you will be happy with this unit. please keep us posted and remember, do all you can to keep a handle on your thread. i look forward to hearing what your thoughts are from first day until...

again, congrats my friend!

Thanks man. I just finished watching avatar and it sounded amazing. So much fine detail coming through. I love the audyssey xt sounds I can def tell a difference in the sub. It doesn't sound so boomy if you know what I mean

K-amps · 07-13-2010, 08:24 PM

Quote:

Originally Posted by bigdolf

Thanks man. I just finished watching avatar and it sounded amazing. So much fine detail coming through. I love the audyssey xt sounds I can def tell a difference in the sub. It doesn't sound so boomy if you know what I mean

Can you manually tweak EQ settings on the Audyssey like one can with MCCAC?

bigdolf · 07-13-2010, 10:40 PM

Quote:

Originally Posted by K-amps

Can you manually tweak EQ settings on the Audyssey like one can with MCCAC?

as far as I can tell no

LordoftheRings · 07-14-2010, 01:54 AM

Quote:

Originally Posted by K-amps

Can you manually tweak EQ settings on the Audyssey like one can with MCCAC?

Quote:

Originally Posted by bigdolf

as far as I can tell no

Definitively not!

* The only manual settings you can do in the Onkyo are from its manual Graphic EQ, and if you use it,
then bye bye Audyssey!

bigdolf · 05-07-2010, 04:37 PM

wow the video processing on this thing is nuts, the up conversion is great.....I do have a question about bi-amping....I only have a 6.2 setup as of right now, I want to bi-amp the left and right, but the manual says that to do this I'd need to use the back channels....Now, I'd really like to keep my back channel, is there another way to do this without losing my back channel

Lord_Lemon · 05-07-2010, 05:48 PM

Quote:

Originally Posted by bigdolf

wow the video processing on this thing is nuts, the up conversion is great.....I do have a question about bi-amping....I only have a 6.2 setup as of right now, I want to bi-amp the left and right, but the manual says that to do this I'd need to use the back channels....Now, I'd really like to keep my back channel, is there another way to do this without losing my back channel

Does the front high/front wide not have it's own amp that can be used for bi-amping the front L+R? I'm pretty sure I've read that about the 5007. Not sure if the 3007 qualifies.

bigdolf · 05-07-2010, 08:20 PM

Quote:

Originally Posted by Lord_Lemon

Does the front high/front wide not have it's own amp that can be used for bi-amping the front L+R? I'm pretty sure I've read that about the 5007. Not sure if the 3007 qualifies.

It does have seperate amps but the manual makes it seem like u can only use the surround back channels

solarrdadd · 05-07-2010, 09:04 PM

you can only use the surround back for bi-amping. what i would recommend is if you really want to do anything you are going to have to buy a seperate amp and get it done that way. putting hard, high, real continuous power to your speakers will really wake them up. for your front 3, if you can swing it, i highly recommend the XPA-3. use pre-outs to the amp, connect your front 3 to the amp and us your receiver to roll all of your surrounds (and still be able to use your heights or wides should you choose to later). you would need to re-run the calibration program again they your rolling.

i would recommend doing that over the receiver bi-amping.

hope that helped, keep us posted.

solarrdadd · 05-07-2010, 09:06 PM

Quote:

Originally Posted by bigdolf

It does have seperate amps but the manual makes it seem like u can only use the surround back channels

sorry bigdolf, it only has one power amp for your speakers. you would have to sacrifice your surround back channels to bi-amp. get a seperate amp for your front 3 and still be able to use all the other channels you want from your receiver too!

bigdolf · 05-07-2010, 09:44 PM

Quote:

Originally Posted by solarrdadd

sorry bigdolf, it only has one power amp for your speakers. you would have to sacrifice your surround back channels to bi-amp. get a seperate amp for your front 3 and still be able to use all the other channels you want from your receiver too!

Yea that's what I thought. Everything sounds good for now. I figure ill wait till I got enough money to get the amp and my new front soundstage. My buddy is selling his Polk rti12s. They're six months old. He said he'd give me them 4 500. Is that honestly a good deal

05-06-2010, 06:08 PM	#1
bigdolf Active Member Member since:Aug 2009 Home Theater Gallery:4 Blu-ray collection:89	Onkyo TX-NR3007 Receiver Thread Onkyo TX-NR3007 onkyo 3007.jpg just came in, ordered it from accessories4less....receiver is amazing, just ran through audyssey I'm liking it, will update further Last edited by Blu Titan; 05-06-2010 at 06:28 PM. Reason: Added link and photo

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo TX-SR 508 Receiver Thread	Receivers	Blu Titan	50	10-06-2012 02:28 PM
Onkyo TX-SR308 Receiver Thread	Receivers	Blu Titan	30	02-03-2011 09:51 PM
Onkyo TX-NR5007 Receiver Thread	Receivers	Blu Titan	34	06-01-2010 07:31 AM
piponeer elite sc25 or the onkyo 3007	Receivers	bigdolf	26	04-26-2010 09:51 PM
Onkyo TX-SR507 Receiver Thread	Receivers	Casey	24	02-10-2010 08:48 PM

06-07-2010, 06:19 AM	#3
B.Hulk Special Member Top ranked HT gallery Member since:Mar 2010 Location:"Empire" State Home Theater Gallery:19 Blu-ray collection:144 Blu-ray reviews: 2 Trading Score:62	[QUOTE=ChadFL;3238350]Keep me updated. I was considering a 3007 for a while but not really considering it anymore. After all the issues I've had with my 605 model and hearing about other peoples problems with even high-end Onkyo receivers I'm likely buying a Pioneer Elite soon.[/QUOTE Hey guy's just joined the thread! I've had the 3007 since Feb, 2010 and I cant find anything wrong with this baby! In Dec, of '09 I got the 807 that used Faroudja high-quality video processing. And had some video issues with it(video processing), exchanged it for another 807. Still same problem! so after reading about the 3007 and "HQV Reon-VX Chip for High-Performance Video Processing" I got some moore cash together and got the 3007!!! Better Picture Better performance! Awesome Reciever you wont regret it. http://www.us.onkyo.com/model.cfm?m=...s=Receiver&p=s

05-06-2010, 07:21 PM	#6
bigdolf Active Member Member since:Aug 2009 Home Theater Gallery:4 Blu-ray collection:89	I upgraded from the 607, unit came in with the current firmware, and its nuts...me likey....now its time to get new speakers

05-06-2010, 07:25 PM	#7
markbr Blu-ray Samurai Top ranked HT gallery Top contributor Member since:Feb 2008 Location:UK. Home Theater Gallery:20 Blu-ray collection:595 Blu-ray reviews:1 Trading Score:1	What speakers are you going to get any idea ??

05-07-2010, 04:37 PM	#15
bigdolf Active Member Member since:Aug 2009 Home Theater Gallery:4 Blu-ray collection:89	wow the video processing on this thing is nuts, the up conversion is great.....I do have a question about bi-amping....I only have a 6.2 setup as of right now, I want to bi-amp the left and right, but the manual says that to do this I'd need to use the back channels....Now, I'd really like to keep my back channel, is there another way to do this without losing my back channel

05-07-2010, 09:04 PM	#18
solarrdadd Blu-ray Prince Top ranked HT gallery Member since:Jul 2008 Location:Virginia Home Theater Gallery:255 4K collection:209 Blu-ray collection:1344 DVD collection:4 Blu-ray reviews: 42 Trading Score:316	you can only use the surround back for bi-amping. what i would recommend is if you really want to do anything you are going to have to buy a seperate amp and get it done that way. putting hard, high, real continuous power to your speakers will really wake them up. for your front 3, if you can swing it, i highly recommend the XPA-3. use pre-outs to the amp, connect your front 3 to the amp and us your receiver to roll all of your surrounds (and still be able to use your heights or wides should you choose to later). you would need to re-run the calibration program again they your rolling. i would recommend doing that over the receiver bi-amping. hope that helped, keep us posted.

Best Blu-ray Movie Deals