Audyssey WOW !!!! - Blu-ray Forum

Scooby Blu · 03-26-2009, 05:52 PM

Just got my Integra 9.9 set up yesterday and the Audyssey set up brought life to my B&W's that is beyond words. Could not be happier !

blujacket · 03-26-2009, 06:09 PM

Quote:

Originally Posted by Scooby Blu

Just got my Integra 9.9 set up yesterday and the Audyssey set up brought life to my B&W's that is beyond words. Could not be happier !

I love Audyssey too. I don't understand the hate for it here.

Aerodude73 · 03-26-2009, 06:18 PM

I just got the above in Today, and will set it up tomorrow. I'll see what the Audyssey does, hopefully enhances the AQ - though i'm sure just having a better AVR will do that even before I do the calibration tests.

Sonny · 03-26-2009, 06:26 PM

I use it for having the onkyo 706 to figure the room & speaker placement, but beyond that the levels are crap. I set everything my self and it sounds a 1,000,000 times better. You should do the same, as long as you know what your doing? I'll help in any way I can?

Aerodude73 · 03-26-2009, 06:35 PM

Quote:

Originally Posted by Sonny

I use it for having the onkyo 706 to figure the room & speaker placement, but beyond that the levels are crap. I set everything my self and it sounds a 1,000,000 times better. You should do the same, as long as you know what your doing? I'll help in any way I can?

Cool and thanks. My speakers are pretty much staying where they are as I can't really move them, and even with my 505 AVR last nite with the new T90e's, "Transformers" sounded freaking amazing!

Still, I'll see what it offers, etc.

NotMe · 03-26-2009, 06:39 PM

The last time I set up my Denon AVR-3808CI with Audyssey. It set my subwoofer at -12.0. That's right, negative twelve.

Hmmmm.

aramis109 · 03-26-2009, 06:41 PM

Quote:

Originally Posted by NotMe

The last time I set up my Denon AVR-3808CI with Audyssey. It set my subwoofer at -12.0. That's right, negative twelve.

Hmmmm.

Depends entirely on what you had it set at. If you had the dial cranked up on the gain, then yeah... it's going to do that.

That's like saying, "I got a speeding ticket even though I was only going 35mph!" Well, that's moot if the speed limit was 25.

Scooby Blu · 03-26-2009, 06:57 PM

Quote:

Originally Posted by Sonny

I use it for having the onkyo 706 to figure the room & speaker placement, but beyond that the levels are crap. I set everything my self and it sounds a 1,000,000 times better. You should do the same, as long as you know what your doing? I'll help in any way I can?

Yes, I had the pros come out and set it up. Just to set the ground work for a few minor tweaks and then perfection set in!

CYMBOL · 03-26-2009, 07:07 PM

I don't know, I ran the Audyssey on my 706 and after, it was just awesome. I turned the bass and center speaker up a few points and it's just perfect on all my lossless tracks.

Still seems a bit weak on DD tracks. Maybe that's because lossless is so much better, but my DD tracks seem fairly weak.

Fors* · 03-26-2009, 10:20 PM

Quote:

Originally Posted by Sonny

I use it for having the onkyo 706 to figure the room & speaker placement, but beyond that the levels are crap. I set everything my self and it sounds a 1,000,000 times better. You should do the same, as long as you know what your doing? I'll help in any way I can?

+1...I used it just for speaker distances...really very little else.

bongzilla · 03-26-2009, 07:58 PM

Speaking of Audyssey, my denon receiver manual nevers talks about a
Audyssey led on the front, sometimes its red, sometimes green.

Anyone knows what causes the colors to change?
Thanks

jkwest · 03-26-2009, 08:11 PM

Quote:

Originally Posted by bongzilla

Speaking of Audyssey, my denon receiver manual nevers talks about a
Audyssey led on the front, sometimes its red, sometimes green.

Anyone knows what causes the colors to change?
Thanks

mood...heres the chart...

Red=Harassed

Green=Calm

Sammy · 03-26-2009, 11:37 PM

Quote:

Originally Posted by bongzilla

Speaking of Audyssey, my denon receiver manual nevers talks about a
Audyssey led on the front, sometimes its red, sometimes green.

Anyone knows what causes the colors to change?
Thanks

That's in the manual... If you can read bad translation Japanese English.

Red means that Audyssey Dynamic EQ is active and green means that Audyssey Dynamic Volume Control (Automatically turns down the volume of commmercials) is active. ADVC can only be active when ADEQ is active.

bongzilla · 03-27-2009, 04:37 PM

Thanks Sammy, I,ll take another look at that manual, I had no idea
it was commmercials changing it.

Halcro 1 · 03-27-2009, 04:41 PM

Just buy a Radio Shack sound level meter and youre all good

Kai Winters · 03-27-2009, 05:25 PM

Well the 9.9 is no slouch and will sound great no matter what I suspect.
Nice receiver !

Uniquely · 03-30-2009, 05:50 PM

Quote:

Originally Posted by Halcro 1

Just buy a Radio Shack sound level meter and youre all good

That would be true if sound levels were the only thing that Audyssey was measuring. It is also measuring for speaker distance, and any delay caused by room acoustics.

Sammy · 03-27-2009, 06:14 PM

Quote:

Originally Posted by bongzilla

Thanks Sammy, I,ll take another look at that manual, I had no idea
it was commmercials changing it.

It isn't. You need to turn it on. But when it is on, it monitors for sudden increases in dB and then smooths out the dB output. I use it when watching commercial TV, but not when watching blu-rays.

blu_world · 03-27-2009, 06:23 PM

Audyssey works smooth,long as you have no other loud noises when it doing the testing your all fine,helped my Sq pretty well for movies

StimpsonJCat · 04-07-2009, 03:34 PM

Quote:

Originally Posted by bongzilla

Speaking of Audyssey, my denon receiver manual nevers talks about a
Audyssey led on the front, sometimes its red, sometimes green.

Anyone knows what causes the colors to change?
Thanks

Green - Dynamic EQ: ON, Dynamic Volume: ON
Red - Dynamic EQ: ON, Dynamic Volume: Off
Off - Both Off

03-26-2009, 05:52 PM	#1
Scooby Blu Power Member Top ranked HT gallery Member since:Apr 2008 Home Theater Gallery:7	Audyssey WOW !!!! Just got my Integra 9.9 set up yesterday and the Audyssey set up brought life to my B&W's that is beyond words. Could not be happier !

03-26-2009, 06:18 PM	#3
Aerodude73 Blu-ray Archduke Member since:Oct 2008 Location:Middletown, RI (MEMBER OF THE "ECPP")™ Home Theater Gallery:134 4K collection:429 Blu-ray collection:2500 DVD collection:7 Digital collection:3 Blu-ray reviews:9 Trading Score:31	Onkyo 706 I just got the above in Today, and will set it up tomorrow. I'll see what the Audyssey does, hopefully enhances the AQ - though i'm sure just having a better AVR will do that even before I do the calibration tests.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Audyssey	Audio Theory and Discussion	tlinnert	3	12-07-2008 08:17 PM
What is Audyssey compensating for?	Audio Theory and Discussion	Uniquely	8	11-27-2008 01:00 AM
Audyssey MultEQ XT	Audio Theory and Discussion	NutsAboutPS3	3	04-10-2008 03:54 AM
audyssey question	Speakers	paulfromtulsa	2	02-23-2008 12:33 AM
New This Week: 09/18/2007 Wow Wow Warner Edition	Blu-ray Movies - North America	Chris Beveridge	38	09-17-2007 07:33 PM

03-26-2009, 06:26 PM	#4
Sonny Blu-ray Ninja Member since:Aug 2007 Home Theater Gallery:8 Blu-ray reviews:6 Trading Score:1	I use it for having the onkyo 706 to figure the room & speaker placement, but beyond that the levels are crap. I set everything my self and it sounds a 1,000,000 times better. You should do the same, as long as you know what your doing? I'll help in any way I can?

03-26-2009, 06:39 PM	#6
NotMe Member Member since:Mar 2008 Blu-ray collection:15 DVD collection:1	The last time I set up my Denon AVR-3808CI with Audyssey. It set my subwoofer at -12.0. That's right, negative twelve. Hmmmm.

03-26-2009, 07:07 PM	#9
CYMBOL Blu-ray Knight Member since:May 2007 Location:I move around a lot. Blu-ray collection:8	I don't know, I ran the Audyssey on my 706 and after, it was just awesome. I turned the bass and center speaker up a few points and it's just perfect on all my lossless tracks. Still seems a bit weak on DD tracks. Maybe that's because lossless is so much better, but my DD tracks seem fairly weak.

03-26-2009, 07:58 PM	#11
bongzilla Active Member Member since:Jan 2009	Speaking of Audyssey, my denon receiver manual nevers talks about a Audyssey led on the front, sometimes its red, sometimes green. Anyone knows what causes the colors to change? Thanks

03-27-2009, 04:37 PM	#14
bongzilla Active Member Member since:Jan 2009	Thanks Sammy, I,ll take another look at that manual, I had no idea it was commmercials changing it.

03-27-2009, 04:41 PM	#15
Halcro 1 Senior Member Member since:Nov 2008 Location:Everywhere Home Theater Gallery:12	Just buy a Radio Shack sound level meter and youre all good

03-27-2009, 05:25 PM	#16
Kai Winters Active Member Member since:Dec 2008 Location:Northern NY...Brownville Home Theater Gallery:4	Well the 9.9 is no slouch and will sound great no matter what I suspect. Nice receiver !

03-27-2009, 06:23 PM	#19
blu_world Special Member Member since:Nov 2006 Home Theater Gallery:27 Blu-ray reviews:1	Audyssey works smooth,long as you have no other loud noises when it doing the testing your all fine,helped my Sq pretty well for movies

Best Blu-ray Movie Deals