Onkyo 605 issues with sound, PS3 doesnt go to HD audio

[Blu Haze]

I set up the speaker and made the PS3 go with the DVD button. I click that button and get the PS3 screen and sound. Not all my speakers are working also. Then i set everything so HDMI and everything out. And when i put Saw 4 in and clicked DTS HD MA it didnt display it in the title menu? (Is that cuz its in the title menu?)

Also what do i set my Onkyo to? How do i do all the speakers and do i put it to multi channel im lost..

Edit i didnt do the BD/DVD settings my bad.

BUT what do i set the reciever to and how do i set the sound and use that little device ?

[Slec]

Originally Posted by Blu Haze

I set up the speaker and made the PS3 go with the DVD button. I click that button and get the PS3 screen and sound. Not all my speakers are working also. Then i set everything so HDMI and everything out. And when i put Saw 4 in and clicked DTS HD MA it didnt display it in the title menu? (Is that cuz its in the title menu?)

Also what do i set my Onkyo to? How do i do all the speakers and do i put it to multi channel im lost..

Edit i didnt do the BD/DVD settings my bad.

BUT what do i set the reciever to and how do i set the sound and use that little device ?

Your 605 should be displaying one of these if everything is setup correctly
Multichannel Audyssey

and Direct

[ToonyLoons]

Make sure you are sending out a PCM signal to your 605 and not bitstream over HDMI. The PS3 does all the decoding and cant send the signal for your 605 to decode. So the 605 will not say Dolby True HD or DTS-HD.

[obiwopkenobi62]

The first thing you should do after you get everything hooked up to your 605 is the audessey sound setup. Look in your manual and it explains exactly how to do it. You plug in the mic and follow the instructions. Also you have to assign what you have hooked up whether it's in HDMI or component inputs. You can use the receiver onscreen display on your TV. It's fairly easy setup. You will set your PS3 to LPCM. Set your PS3 outputs for audio/video to HDMI. Then when you play anything with DTS-HD Master audio the only thing you should see on your receiver is Multi channel.
Hope that helps.

[Blu Haze]

Im waiting to put the 7.1 so im not going to do that at the moment. though.

[Blu Haze]

should i do direct or the other one. I dont have or done the audessey.

[obiwopkenobi62]

You can do the sound setup now for 5.1 and then redo it later when you hook up the other speakers for 7.1. It is easy and only takes a few minutes.

[CasualKiller]

Any doubts just hit select on your controller it will tell you exactly what your getting and at what bit rate.