Onkyo 605 issues with sound, PS3 doesnt go to HD audio - Blu-ray Forum

ToonyLoons · 05-08-2008, 10:00 PM

Make sure you are sending out a PCM signal to your 605 and not bitstream over HDMI. The PS3 does all the decoding and cant send the signal for your 605 to decode. So the 605 will not say Dolby True HD or DTS-HD.

obiwopkenobi62 · 05-08-2008, 10:05 PM

The first thing you should do after you get everything hooked up to your 605 is the audessey sound setup. Look in your manual and it explains exactly how to do it. You plug in the mic and follow the instructions. Also you have to assign what you have hooked up whether it's in HDMI or component inputs. You can use the receiver onscreen display on your TV. It's fairly easy setup. You will set your PS3 to LPCM. Set your PS3 outputs for audio/video to HDMI. Then when you play anything with DTS-HD Master audio the only thing you should see on your receiver is Multi channel.
Hope that helps.

Blu Haze · 05-08-2008, 10:34 PM

Im waiting to put the 7.1 so im not going to do that at the moment. though.

Blu Haze · 05-10-2008, 12:38 AM

should i do direct or the other one. I dont have or done the audessey.

obiwopkenobi62 · 05-10-2008, 02:05 AM

You can do the sound setup now for 5.1 and then redo it later when you hook up the other speakers for 7.1. It is easy and only takes a few minutes.

CasualKiller · 05-10-2008, 04:27 AM

Any doubts just hit select on your controller it will tell you exactly what your getting and at what bit rate.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Having some issues with my g15/onkyo 605/ps3 sertup	Plasma TVs	plowmanjoe	4	01-04-2010 05:22 AM
Onkyo SR-605 and PS2 connection issues	Receivers	Marquoz	7	07-30-2008 11:40 PM
No Sound when connecting my ps3 to my onkyo 605	Home Theater General Discussion	SeanMF	9	05-22-2008 11:12 PM
Help an audio n00b out with his PS3 and Onkyo 605	Receivers	Phatferd	3	02-15-2008 04:54 PM
PS3 Onkyo 605 uncompressed audio issue	Blu-ray Players and Recorders	pelechati	4	06-20-2007 06:07 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-08-2008, 10:00 PM	#1
ToonyLoons Expert Member Member since:Apr 2007 Blu-ray collection:130	Make sure you are sending out a PCM signal to your 605 and not bitstream over HDMI. The PS3 does all the decoding and cant send the signal for your 605 to decode. So the 605 will not say Dolby True HD or DTS-HD.

05-08-2008, 10:05 PM	#2
obiwopkenobi62 Blu-ray Samurai Top ranked HT gallery Member since:Mar 2008 Location:Deatsville, Al Home Theater Gallery:531 Blu-ray collection:1143 DVD collection:62 Blu-ray reviews: 2 Trading Score:6	The first thing you should do after you get everything hooked up to your 605 is the audessey sound setup. Look in your manual and it explains exactly how to do it. You plug in the mic and follow the instructions. Also you have to assign what you have hooked up whether it's in HDMI or component inputs. You can use the receiver onscreen display on your TV. It's fairly easy setup. You will set your PS3 to LPCM. Set your PS3 outputs for audio/video to HDMI. Then when you play anything with DTS-HD Master audio the only thing you should see on your receiver is Multi channel. Hope that helps.

05-08-2008, 10:34 PM	#3
Blu Haze Expert Member Member since:Mar 2008	Im waiting to put the 7.1 so im not going to do that at the moment. though.

05-10-2008, 12:38 AM	#4
Blu Haze Expert Member Member since:Mar 2008	should i do direct or the other one. I dont have or done the audessey.

05-10-2008, 02:05 AM	#5
obiwopkenobi62 Blu-ray Samurai Top ranked HT gallery Member since:Mar 2008 Location:Deatsville, Al Home Theater Gallery:531 Blu-ray collection:1143 DVD collection:62 Blu-ray reviews: 2 Trading Score:6	You can do the sound setup now for 5.1 and then redo it later when you hook up the other speakers for 7.1. It is easy and only takes a few minutes.

05-10-2008, 04:27 AM	#6
CasualKiller Blu-ray Samurai Member since:Feb 2008 Location:Brooks Alberta Blu-ray collection:54 Trading Score:15	Any doubts just hit select on your controller it will tell you exactly what your getting and at what bit rate.

Best Blu-ray Movie Deals