Harmony One Remote Lighting/ LED lighting help

[Silverwing]

I have the Harmony One remote and was wondering what I needed to buy to get it to control the lighting in my basement/led lights I have behind my tv. Thank you!

[Rblu-Dblu]

Originally Posted by MAD7334

I have the Harmony One remote and was wondering what I needed to buy to get it to control the lighting in my basement/led lights I have behind my tv. Thank you!

You can plug your lights into your receiver so that they go on and off when your receiver does. Led lights dont draw very much power.

[Silverwing]

Originally Posted by Rblu-Dblu

You can plug your lights into your receiver so that they go on and off when your receiver does. Led lights dont draw very much power.

Which lights are you refering to? The led ones or the actual lighting in my basement?

[Silverwing]

Did a little more research and was wondering if it was correct if I used this
http://www.smarthome.com/4040/Infrar...-IR-543/p.aspx

Any help would be great, thanks.

[Rblu-Dblu]

Originally Posted by MAD7334

Which lights are you refering to? The led ones or the actual lighting in my basement?

Your led lights.

[Hoser59]

I use one of these for the lights in my adjacent dining room. As long as you can point your remote at it they work fantastic. They are cheap, easy to install and harmony lists them on their website so the codes can be downloaded to your remote. They also have several programable "favourites" settings (low light, medium, etc). Before my Harmony One got damaged I had it set up so that when I pressed the "Watch Movie" button the lights would slowly fade and then go out off and when I pressed pause they would light up slightly.

http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

[Silverwing]

Originally Posted by Rblu-Dblu

Your led lights.

These are the lights I have behing my tv:

http://www.ikea.com/us/en/catalog/products/50119407

How do I hook those up to my reciever?

Originally Posted by Hoser59

I use one of these for the lights in my adjacent dining room. As long as you can point your remote at it they work fantastic. They are cheap, easy to install and harmony lists them on their website so the codes can be downloaded to your remote. They also have several programable "favourites" settings (low light, medium, etc). Before my Harmony One got damaged I had it set up so that when I pressed the "Watch Movie" button the lights would slowly fade and then go out off and when I pressed pause they would light up slightly.

http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

So just to get this straight because I am not familar with lights, I would buy what you had in the link for each swtich I have? Then if I understand this correctly, I download the inputs into my Harmony remote, and I'm all set? Thanks for the help everybody!

[junemartys]

This one can help you for your preference. =)

pendant lighting