Optimizing 3D's potential using Darbee Video Processors - Blu-ray Forum

RockyIII · 01-03-2018, 01:51 PM

Quote:

Originally Posted by shield80

Yea for Oled it not gonna do anything than make ut look unnatural because Oled is at good as it gets, only for midrange projectors or TVs it will do much better.

I am getting a mid-range projector

shield80 · 01-03-2018, 04:26 PM

Quote:

Originally Posted by RockyIII

I am getting a mid-range projector

grodd · 01-03-2018, 04:48 PM

I use my Darbee for 3D almost always and sometimes for regular Blu Ray on my OLED.
I use a setting of around 30 something for 2D and around 60 for 3D.

After doing many tests, I found it really adds a pop to the 3D. I wouldn't watch 3D without it.

Darbee's can also be very sensitive to what cable you use and the length. The manufacturer recommends 2m length and I would get Audioquest or maybe Monoprice for better stability.

I also upgraded the power adapter/wall plug-in as some are known to have problems in that area as well.

RockyIII · 01-03-2018, 04:56 PM

Quote:

Originally Posted by grodd

I use my Darbee for 3D almost always and sometimes for regular Blu Ray on my OLED.
I use a setting of around 30 something for 2D and around 60 for 3D.

After doing many tests, I found it really adds a pop to the 3D. I wouldn't watch 3D without it.

Darbee's can also be very sensitive to what cable you use and the length. The manufacturer recommends 2m length and I would get Audioquest or maybe Monoprice for better stability.

I also upgraded the power adapter/wall plug-in as some are known to have problems in that area as well.

So a 10-feet hdmi cable is most likely a bad idea?

grodd · 01-03-2018, 05:01 PM

Hmm, well if its a good cable I would think it should make it. (Supra, higher end Audioquest, certified HDMI cables).
I think the cables below 2m and 1m are where others were having the most issues. I haven't tried that long of a cable, but I would guess that's pushing it.

RockyIII · 01-03-2018, 05:03 PM

Quote:

Originally Posted by grodd

Hmm, well if its a good cable I would think it should make it. (Supra, higher end Audioquest, certified HDMI cables).
I think the cables below 2m and 1m are where others were having the most issues. I haven't tried that long of a cable, but I would guess that's pushing it.

These are the ones I will be using:

https://www.ebay.com/itm/Monoprice-C...72.m2749.l2649

grodd · 01-03-2018, 05:04 PM

Quote:

Originally Posted by RockyIII

These are the ones I will be using:

https://www.ebay.com/itm/Monoprice-C...72.m2749.l2649

Yea I would go for it.

schiltzamania · 01-03-2018, 05:19 PM

Quote:

Originally Posted by RockyIII

So a 10-feet hdmi cable is most likely a bad idea?

My output cable is a 25 ft monoprice and I had no issues with the Darbee.

Sent from my SM-G955U using Tapatalk

01-03-2018, 04:48 PM	#3
grodd Power Member Member since:Sep 2011 Location:Northern CA Trading Score:3	I use my Darbee for 3D almost always and sometimes for regular Blu Ray on my OLED. I use a setting of around 30 something for 2D and around 60 for 3D. After doing many tests, I found it really adds a pop to the 3D. I wouldn't watch 3D without it. Darbee's can also be very sensitive to what cable you use and the length. The manufacturer recommends 2m length and I would get Audioquest or maybe Monoprice for better stability. I also upgraded the power adapter/wall plug-in as some are known to have problems in that area as well.

01-03-2018, 05:01 PM	#5
grodd Power Member Member since:Sep 2011 Location:Northern CA Trading Score:3	Hmm, well if its a good cable I would think it should make it. (Supra, higher end Audioquest, certified HDMI cables). I think the cables below 2m and 1m are where others were having the most issues. I haven't tried that long of a cable, but I would guess that's pushing it.

Best 3D Blu-ray Deals