Modified Steelbooks

[casperuk]

Very nice. What do you use to stick the spine back into place?

[Vangeli]

Those are all awesome! I've wanted to do Blade Runner as well since I have the consolidated three disc release with all of the features from the five disc release, and with the addition of the UHD disc it'd be a complete four disc Steelbook! But the only BR Steelbook I like is the Canadian exclusive and even then it's not that great. So for now it's just a special UHD Viva Elite package for me.

Originally Posted by casperuk

Very nice. What do you use to stick the spine back into place?

Double sided scotch/paper tape!

[severe conservative]

Originally Posted by casperuk

Very nice. What do you use to stick the spine back into place?

If you are not adding custom artwork and you keep plastic case hot and you used an exacto knife to get the spine off, the remaining glue residue should be enough to get the spine back into place and keep it stuck on. Also you might use a hair dryer on the spine to keep the spine hot. After you get the spine back on, prop up the plastic case so that the spine is facing down on the table, and use a couple of small boxes of envelopes (one on each side of the case) to keep the case propped up (you can also use two bookends). This will help make sure the spine sticks on and stays stuck on.

I have found that this usually works even with custom art on the spine. But if you want to use something extra I would use silicone in between the custom art and the spine. Put only a very small amount on your finger and rub it onto the custom art . It is very easy to use too much. If you find that you didnt apply enough you can always use more. Try not to saturate you finger with the silicone. Try to make sure there is only a small amount in the middle of your finger tip. If you feel you didnt get enough on the spine artwork, you can always add more. Run the hair dryer over the metal spine to make sure the glue is still hot, then put the spine back on. Prop up the case with the spine facing down and keep it propped up with bookends or envelope boxes to ensure it sticks.

[severe conservative]

So Im a fan of Predator 1 and 2 but don't really care for Predators 2010, but I love the Predator collection steelbook, so I converted it to house only the first two Predator movies. Trying to figure out the best way to blot out the number "3" on the cover and spine. So far the best way I know how is to use a sharpie. Which works very well - you would need to scratch it and rub it very hard to get the ink off - things you would not want to do to a steelbook anyway. If anybody has a better idea on how to blot it out it would be appreciated.




pix upload