Please Help with player!!

[Bodyslide]

Have you setup the player to have access to the internet already? On page 17 it tells the settings to connect. If you have already done this.

http://service.us.panasonic.com/OPER...MPBD60-MUL.PDF

You can always update manually with a cd. Good Luck
http://panasonic.jp/support/global/c...index2_na.html

[backtothecanvas]

Originally Posted by Bodyslide

Have you setup the player to have access to the internet already? On page 17 it tells the settings to connect. If you have already done this.

http://service.us.panasonic.com/OPER...MPBD60-MUL.PDF

You can always update manually with a cd. Good Luck
http://panasonic.jp/support/global/c...index2_na.html

oddly enough it appears as if you have to go through a router first then into the bd80, instead of straight from modem into bd80. that is strange to me.

[rdodolak]

Originally Posted by backtothecanvas

oddly enough it appears as if you have to go through a router first then into the bd80, instead of straight from modem into bd80. that is strange to me.

Most modems get locked to an individual/specific mac address. For example, if the modem was previously hooked up to a computer then it's probably still mapped to your computer's mac address.

To reset this, disconnect the ethernet cable from the modem. Unplug the modem and let it sit for a few minutes. Plug the power cord back into the modem and let it reboot. Now, plug in an ethernet cable from your blu-ray player into the modem. Within a few minutes your player should be able to connect to the internet.

You'll have to repeat these steps if you want your previous equipment (e.g. computer) to work with the modem.

[ScuseMe]

Originally Posted by backtothecanvas

oddly enough it appears as if you have to go through a router first then into the bd80, instead of straight from modem into bd80. that is strange to me.

The BD80 needs something to give it an IP address. That's usually the router part of the modem. Make sure DHCP is ON in the BD80.