NEW! Onkyo receivers starting to surface; TX-SR506, TX-SR576 and TX-SR606

[Beta Man]

Originally Posted by RichiPuppy

I think that in different countries they measure watts differently.

Really? news to me..... I could have sworn that a Watt was based on Joules, so Asia calculates Joules differently than North America for instance?

[Beta Man]

Originally Posted by Rike255

I unfortunately don't agree. It's definitely the most important part because, well these are audio devices. But I want my equipment to look good as well as sound good.

Call me shallow but I love a good looking receiver!

We can agree to disagree then It's your money afterall.

[BigBluu]

Originally Posted by Moefiz

Amazon has the the 606 listed already.

http://www.amazon.com/ONKYO-TX-SR606...7249820&sr=8-1

Seem pretty cool....might have to look into this one also.

was this actually available at one time? was anyone here able to place an in-stock order? it currently shows as out of stock, not preorder.

[RichiPuppy]

Originally Posted by Beta Man

Really? news to me..... I could have sworn that a Watt was based on Joules, so Asia calculates Joules differently than North America for instance?

Thanks for putting it so rudely. I just guessed that they did being that in the back of my Onkyo manual that they had a higher measurement for the watts in Europe and Asia. I figured that the fact I put I THINK in my post that I was referring to the fact I was not sure.

[BTBuck1]

so how does this 606 differ fromt he 605?

Looks the same to me

[Beta Man]

Originally Posted by RichiPuppy

Thanks for putting it so rudely. I just guessed that they did being that in the back of my Onkyo manual that they had a higher measurement for the watts in Europe and Asia. I figured that the fact I put I THINK in my post that I was referring to the fact I was not sure.

sorry, didn't mean for it to come off sounding rude, but re-reading it, I guess it did. I was actually curious to as whether they rated things differently, and if so, how they measured it, because Watts are based off of other measurements...... wasn't saying you were incorrect, and still, I say "I just don't know" either.... could be different, but it'd be news to me (not necessarily shocking news though)

[RichiPuppy]

You are correct about watts. Its the frequencies and ohms that are different. The US measurement they use is at 20 Hz to 20 kHz at 8 ohms and the European and Asian measurement is at 1 kHz and 6 ohms.

[jimbomcgommy]

According to the write-up on the 606 it has 4 HDMI inputs and 1 output. That was really the only thing I noticed off the top of my head. And the look is slightly different.

[Moefiz]

Originally Posted by BigBluu

was this actually available at one time? was anyone here able to place an in-stock order? it currently shows as out of stock, not preorder.

Good question.I was actually suprise to see it listed since 3/08 and it did seem that they had in stock and just sold out.

[TENSE]

does anybody know hen the onkyo 606 receiver is coming out?
well im ready to purchase a reciever, but i dont know which one to get..!!
i wanted to purchase the elite 92, or the onkyo 805, but my tv stand is only 17 3/4 in depth, but the recivers i wanted to get were over 18 inches in debth.is the upcoming onkyo 606 going to be worth it over the 705 or 805?

[TENSE]

Weel People?

[Beta Man]

I wouldn't base your receiver selection on the limitations of your current stand..... I would try to find an alternative way to set it up so you can get the receiver of your choice (I'd go with the Elite)

[TENSE]

this is the stand that i have.
http://www.bello.com/index.php?parti...ct&prod_id=171

[Beta Man]

Originally Posted by TENSE

this is the stand that i have.
http://www.bello.com/index.php?parti...ct&prod_id=171

Why not get a separate A/V rack then, to go next to it, in the corner, etc.... I think if you try to "squeeze" any of those other receivers into that stand, they may over-heat (and I hear the 605 has that problem anyways)

[Bluray_ne1]

The 606 doesn't compare to the Pioneer 92 or the 805 as it only has 90w per channel. If you've got the jack for one of the others, make it work and don't settle for the 606 because it fits.

I agree with Beta Man. Make sure you've got at least 8" of clearance above the receiver for proper ventilation.

[ixlegitballinxl]

/nod....get a new stand

[McBain]

Originally Posted by TENSE

does anybody know hen the onkyo 606 receiver is coming out?

The press release says April release:

Onkyo Ratchets up Features on New TX-SR606 Receiver

UPPER SADDLE RIVER, NJ (4/21/08) -- Onkyo has upgraded the features set of its most popular HDMI-1.3a-capable home theater receiver by adding 1080i video upscaling, two additional HDMI inputs to handle a total of four HDMI sources, Audyssey's new Dynamic EQ loudness compensation technology, and Onkyo's new Music Optimizer circuit. The new Onkyo TX-SR606 replaces the company's best selling TX-SR605.

The Onkyo TX-SR606 provides HDMI 1.3a inputs for up to four high-definition 1080p video sources, plus high definition surround sound processing all over a single HDMI connection. This version of HDMI has greater bandwidth for higher resolution, higher frame rates, and 36-Bit Deep Color. Onkyo's HDMI video upscaling technology converts standard definition signals to 1080i, and Faroudja DCDi Edge (Directional Correlational Deinterlacing) technology effectively eliminates video artifacts.

This receiver also has a powerful 90 watt-per-channel amplifier section, Remote Interactive control over HDMI (RIHD), Audyssey 2EQ automatic room correction, is Sirius Satellite Radio ready, and offers a full range of advance surround sound codecs, including Dolby TrueHD and DTS-HD Master Audio to provide lossless bit-by-bit audio identical to the master recordings.

"The TX-SR605 was the industry's first home theater receiver with HDMI 1.3a repeaters and a price tag in the $500 range," said Paul Wasek, Onkyo USA's marketing manager. "The marketplace welcomed it as an unbeatable value, and the new TX-SR606 builds on its success with two more HDMI inputs, and great new features such as 1080i video upscaling and Audyssey's new Dynamic EQ, which provides a greatly improved home theater surround sound experience at more normal moderate listening levels. It also has Onkyo's exclusive Music Optimizer for a solid improvement in the dynamics of the music when headphone-oriented sources like iPods are played over loudspeakers."

The Audyssey 2EQ automatic calibration employs an included calibration microphone to analyze the system's acoustical output at three unique positions in the listening area. The receiver sends test signals to each speaker in turn, then uses the inputs from the microphone to adjust channel level and time delay settings for each speaker. By taking readings in three different positions in the theater room, the receiver can be calibrated to the speakers and environment, delivering optimal response throughout the room rather than just at the 'sweet spot' directly in front of the screen.

This receiver is among the first products to employ Audyssey's Dynamic EQ algorithm, which adds moment-by-moment refinement to the receiver's frequency response and surround levels in order to compensate for volume-dependent deteriorations in the listening experience, particularly at low volume levels. When used in combination with the Audyssey 2EQ system, this feature tailors the receiver's output to correct for room acoustics, listening position, and playback-level distortions, delivering an overall experience that is a much closer match to what the audio production engineers originally intended.

The TX-SR606 also includes the company's new Music Optimizer software, which improves the quality of MP3 and AAC encoded audio source material. While these compressed audio formats sound quite acceptable over small headphones or PC speaker systems, when reproduced on a full-scale home theater system the loss of high-frequency information becomes much more apparent. The Music Optimizer employs sophisticated equalization and optimization algorithms to overcome these faults, and enhances the reproduction quality of digitally compressed music.

For sharp and accurate audio reproduction, the TX-SR606 employs 32-bit DSP processing and 192 kHz/24-bit digital-to-analog converters on all channels. Each includes 7.1-channel surround processing for Dolby Digital EX, Dolby ProLogic IIx, DTS-ES, DTS-96/24, and DTS Neo:6. The receivers also include a user-selectable eight-setting subwoofer crossover adjustment for ideal integration of any subwoofer/satellite speaker system.

The TX-SR606 also features Onkyo's Powered Zone 2 capability, which can be used to power stereo speakers in a second room while listening to 5.1-channel sound in the main zone thanks to a dedicated set of zone 2 L/R speaker terminals. The receiver is capable of processing separate multichannel and stereo sources simultaneously for the main and second zone, or processing a single source for both. There is also a zone 2 pre-out that can be used in conjunction with a dedicated zone amplifier or receiver. For those with main stereo LR loudspeakers that can be bi-amped, the back surround channels can also be reconfigured for this much more powerful operating mode.

The Onkyo TX-SR606's RIHD (Remote Interactive over HDMI) capability allows it to seamlessly integrate with other leading brand-name devices, including all Toshiba CE-Link equipment and selected Panasonic VIERA Link, Sharp, and Samsung products. The receiver is also compatible with Onkyo's RI (Remote Interactive) iPod dock/charger models.

The Onkyo TX-SR606 will be available in black or silver finish in April, and it will have a suggested retail price of $579.

Onkyo, which takes its name from the Japanese "On" meaning 'sound' and "Kyo" meaning 'harmony,' has been producing precision audio components for over a half-century. The company's philosophy is to deliver products that are superbly designed and built to a consistently outstanding standard of excellence. Today, Onkyo is at the forefront of the home theater and digital revolutions. For more information about this and other fine Onkyo products, visit www.onkyousa.com or call 800-229-1687.

[Colglizity]

I may be purchasing this receiver a litter bit later in the year. I really wanted a Denon, either the 2803CI or 2808CI, but they're so expensive and they only have 2 HDMI inputs. My dad's got a Denon reciever and it sounds crazy good, but I don't have the same cash that he does.

[Sith]

what resolution does the 605 upscale??? I can get it for $400 at frys...Is this
one really better?

[NexusFX]

Source: Engadget HD

by Steven Kim, posted Apr 23rd 2008 at 11:05AM

Onkyo TX-SR606

Onkyo has continued to roll "X06" updates across its receiver lineup. Last month we heard about the TX-SR576 and TX-SR506 models, and now we get the TX-SR606 (not to be confused with the TX-SA606X). Apparently Onkyo wasn't too eager to mess with the success of last year's TX-SR605 receiver, the new model adds 1080i upscaling, two more HDMI inputs (making a total of four), and trades off Neural Surround in favor of Audyssey Dynamic EQ and Onkyo's Music Optimizer processing. The amplifier section and pricing look to be the same, which isn't a bad thing on either count: $579 (MSRP) nets you 90-Watts across 7 channels, all backed by the heavy transformer cores Onkyo is known for. Available any day now, this might look good with your stimulus check; or consider picking up a TX-SR605 on the cheap.